VTech Marble Rush T-Rex Dino Thrill Track Set

Introduction

Thank you for purchasing the VTech Marble Rush®/MD T-Rex Dino Thrill Track Set™/MC. Prepare for a rush of non-stop action! Build exciting courses, send marbles into motion, and compete with family and friends through challenges featuring lights and sounds. Refer to the Color Manual for detailed building steps.

Included in the Package

• Marble Rush®/MD T-Rex Dino Thrill Track Set™/MC
• 109 building pieces
• 5 Magic Stunt Marbles (metal core)
• 5 marbles
• Sticker sheet
• Color manual
• Quick Start Guide

Important Safety Information

All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords, and packaging screws are not part of this toy and should be discarded for your child's safety.

For your child's safety, please dispose of all packaging materials such as adhesive tapes, plastic sheets, fasteners, labels, cords, and packaging screws. These are not part of the toy.

Please save this manual as it contains important information.

It is advisable to keep this quick start guide as it contains important information.

Do not aim at eyes or face.

Do not aim at eyes or face.

Do not discharge any object other than the projectile provided with this toy.

Do not use projectiles other than those provided with this toy.

Safety Warnings

CHOKING HAZARD: Toy contains small parts and small balls. Not for children under 3 years.

Instructions

T-Rex Battery Removal and Installation

Step 1: Make sure the T-Rex is turned Off.

Step 2: Find the battery cover located on the bottom of the unit. Use a screwdriver to loosen the screw and then open the battery cover. (Diagram shows the underside of the T-Rex unit with the battery compartment cover and a screw.)

Step 3: Remove old batteries by pulling up on one end of each battery.

Step 4: Install 2 new AA (LR6/AM-3) batteries following the diagram inside the battery box. For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended. (Diagram shows the battery compartment with correct polarity markings for two AA batteries.)

Step 5: Replace the battery cover and tighten the screw to secure.

Elevator Battery Removal and Installation

Step 1: Make sure the Elevator is turned Off.

Step 2: Find the battery cover located on the back of the unit. Use a screwdriver to loosen the screw and then open the battery cover. (Diagram shows the back of the Elevator unit with the battery compartment cover and a screw.)

Step 3: Remove old batteries by pulling up on one end of each battery.

Step 4: Install 3 new AAA (LR03/AM-4) batteries following the diagram inside the battery box. For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended. (Diagram shows the battery compartment with correct polarity markings for three AAA batteries.)

Step 5: Replace the battery cover and tighten the screw to secure.

Battery Installation Safety

Adult assembly required for battery installation. Keep batteries out of reach of children.

Battery installation must be performed by an adult. Keep batteries out of reach of children.

Important: Battery Information

• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.

Rechargeable Batteries

• Remove rechargeable batteries (if removable) from the toy before charging.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not charge non-rechargeable batteries.

Assembly Instructions

Adult assembly required. For your child's safety, do not let your child play with this product until it is fully assembled.

Step 1: Align the dinosaur's legs with the buckle as shown in the picture and snap them in. (Diagram shows two parts of the dinosaur's legs and how they connect to a buckle mechanism.)

Step 2: Align both ends of the transparent magnetic cable with the two buckles and snap them in place. A snapping sound will indicate they are connected. (Diagram shows a transparent cable with connectors at each end, aligning with two buckle pieces.)

Label Application

Please securely stick the labels to the playset as indicated below. (Diagram shows a sheet with various numbered stickers and corresponding numbered locations on the playset components. The labels include decorative elements, track markings, and dinosaur-themed graphics.)

Parts Identification

(Diagram shows a comprehensive diagram displaying all the individual components of the Marble Rush T-Rex Dino Thrill Track Set, each labeled with a number from 1 to 28. This includes the T-Rex body, head, tail, legs, various track pieces, connectors, and accessories.)

Product Features

1. Off/Music/SFX Switch

Slide the switch all the way to the 'Music and SFX' icon ?? to turn on both music and sound effects (SFX). The middle position plays SFX with no background music. Slide the selector all the way to the 'Off' icon ? to turn off the T-Rex.

2. Music Selection Button

Press the Music Selection Button ? to cycle through the background music options.

3. Release Button

You may press this button to release the marbles stored in the Dino's tail.

4. Chomping T-Rex & Marbles

When Magic Stunt marbles go into the Chomping T-Rex's mouth and are detected by the magnetic trigger, the Chomping T-Rex's mouth will snap shut and its body will straighten while playing a dino sound effect. Any marbles in the Chomping T-Rex will roll down the tail. When standard plastic marbles go into the Chomping T-Rex's mouth, the Chomping T-Rex will not snap down, only flash a yellow light and play a sound effect. (Diagram shows marbles entering the T-Rex mouth, with arrows indicating the snapping action and body straightening.)

5. Automatic Shut-Off

To preserve battery life, the Marble Rush T-Rex Dino Thrill Track Set will automatically power down after several minutes without input. The Chomping T-Rex can be turned on again by sliding the Off/Music/SFX Switch to the 'Music and SFX' icon ?? or 'SFX only' icon ?. The unit will automatically turn off when the batteries are very low.

Care & Maintenance

• Keep the unit clean by wiping it with a slightly damp cloth.
• Keep the unit out of direct sunlight and away from any direct heat sources.
• Remove the batteries if the unit will not be in use for an extended period of time.
• Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.
• If the unit stops working or malfunctions, install a new set of batteries.

Important Note

Customer Support

If a problem persists, please contact VTech Consumer Services Department at 1-800-521-2010 (U.S.) or 1-877-352-8697 (Canada). Alternatively, visit the vtechkids.com website and fill out the 'Contact Us' form under the Customer Support link. VTech is committed to developing quality products and encourages customers to reach out with any issues or suggestions. A service representative will assist you.

Note on FCC Compliance

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Supplier's Declaration of Conformity

47 CFR § 2.1077 Compliance Information

• Trade Name: VTech®
• Model: 5716
• Product Name: Marble Rush® T-Rex Dino Thrill Track Set™
• Responsible Party: VTech Electronics North America, L.L.C.
• Address: 1156 W. Shure Drive, Suite 200, Arlington Heights, IL 60004
• Website: vtechkids.com

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.