User Guide for sprecher schuh models including: KTA9 Type E Self-Protected Manual Motor Controller, KTA9, Type E Self-Protected Manual Motor Controller, Motor Controller, Controller
www.sprecherschuh.com - /ecatalog/corrections/F/
File Info : application/pdf, 1 Pages, 129.25KB
DocumentDocumentType E Self-Protected Manual Motor Controller Enclosed Series KTA9 Enclosed KTA9 - IP65 Amp / Horsepower Rating Non-metallic (IP65) Enclosure Max. Horsepower Three Phase 200V 230V 460V 575V O/L Relay Ampere Range Catalog Number ~ ~ ~ ~ 0.10...0.16 2.2 KTA9-32S-0.16A-CG ~ ~ ~ ~ 0.16...0.25 3.5 KTA9-32S-0.25A-CG ~ ~ ~ ~ 0.25...0.40 5.6 KTA9-32S-0.4A-CG ~ ~ ~ ~ 0.40...0.63 8.8 KTA9-32S-0.63A-CG ~ ~ 1/2 1/2 0.63...1.0 14 KTA9-32S-1.0A-CG ~ ~ 3/4 ~ 1.0...1.6 22 KTA9-32S-1.6A-CG 1/2 1/2 1 1-1/2 1.6...2.5 35 KTA9-32S-2.5A-CG 3/4 3/4 2 3 2.5...4.0 52 KTA9-32S-4.0A-CG 1 1-1/2 3 5 4.0...6.3 88 KTA9-32S-6.3A-CG 2 2 5 7-1/2 6.3...10 140 KTA9-32S-10A-CG 3 5 10 10 10...16 224 KTA9-32S-16A-CG 5 5 10 15 14.5...20 280 KTA9-32S-20A-CG 5 7-1/2 15 20 18...25 330 KTA9-32S-25A-CG 7-1/2 10 20 25 24...29 406 KTA9-32S-29A-CG 7-1/2 10 20 30 27...32 448 KTA9-32S-32A-CG Price 380.40 AY 380.40 AY 380.40 AY 414.60 AY 414.60 AY 414.60 AY 414.60 AY 414.60 AY 414.60 AY 414.60 AY 449.85 AY 449.85 AY 449.85 AY 554.53 AY 554.53 AY Magnetic Res. Current Dimension Code Enclosed Motor Circuit Controllers Includes: ·Non-metallic (IP65) enclosure with integrated IP65 operator watertight, dusttight ·KTA9-32S (Standard Interrupting Capacity) "Type E" Self-protected Combination Manual Controller ·Terminal Adaptor for Type E Applications (Cat.# KT9-40-TE) ·Gray and black IP65 handle Enclosure Only Description Catalog Number Price Gray/Black handle Red/Yellow handle KT9-ENN 144.08 KT9-ENRY 144.08 F Modifications (Factory Assembled) Description KT9 Auxiliaries & Trip Contacts, Front Mount 250V max. 1 NO Auxiliary 1 NC Auxiliary 1 NO + 1 NC Auxiliary 2 NO Auxiliaries 1 NO SC+OL + 1 NC Auxiliary 1 NO SC+OL + 1 NO Auxiliary Side Mount 600V max. 2 NC Auxiliaries 2 NO Auxiliaries 1 NO + 1 NC Auxiliary Add Suffix to Cat. Number -B -A -C -D -R -S -AS02 -AS20 -AS11 Price Adder 64.26 64.26 71.52 71.52 89.14 89.14 81.89 81.89 81.89 Additional KT9 Trip Contacts, Side Mount 600V max. 1 NO SC+OL+1 NO SC 1 NO SC+OL+1 NC SC 1 NC SC+OL+1 NO SC Accessories Undervoltage Release Module Shunt Release Module -R00 -R01 -R10 -UA- -AA- 97.43 97.43 97.43 130.60 130.60 Horsepower ratings shown in the table above are for reference. The final selection of the controller depends on the actual motor full load current and service factor. · For motor with service factor less than 1.15. Use motor nameplate full load current times 0.9 and choose the motor starter with the appropriate current range. Example: Motor FLC = 4.2A; S.F. = 1.0. 4.2A x 0.9 = 3.78A. Select catalog number KTA9-32S-4.0A. Magnetic trip is fixed at 14x the maximum value of the current adjustment range. Refer to page F5 for applied KAIC ratings. KTA9 may be applied to single phase loads if 3 poles of device are wired in series. See footnote 1 for device selection criteria. A red and yellow handle may be selected instead of the standard gray and black handle. Change "CG" suffix to "CJ". Ex: Change KTA9-32S-0.16A-CG to KTA9-32S-0.16A-CJ. Handles are built-in to the enclosure and are not available as components. Catalog numbers with specific voltages (i.e. @ 575V) shaded in gray are suitable for use as a manual motor starter only because they are not Type E rated. See page F5 for ratings. -UA..-AA Coil Codes () AC Coil Code 24V 28V 120V 127V 230V 240V 277V 460V 480V 600V Voltage Range 50 Hz 60 Hz 21V 24V 24V 28V 105V 120V 110V 127V 220...230V ~ ~ 240...260V 240V 277V 380...400V 400...460V 415V 480V 550V 600V SSNA2018 Discount Schedule B7 visit wwwwww.s.psrpercehcehresrcshcuhhu.hc.ocomm/e/ceactaatlaologgfo-rAplrlipcirnicginagndshtohewnmionsUt uSpdtoolladraste- iFnYfo2r0mation F1.57