Ninja Foodi Max Dual Zone Air Fryer AF400EU

Thank You

Thank you for purchasing the Ninja® Foodi® Max Dual Zone Air Fryer.

Register Your Purchase

Visit ninjakitchen.eu/register-guarantee to register your purchase. Scan the QR code using a mobile device.

Record This Information

Model Number: AF400EU

Serial Number:

Date of Purchase:

Store of Purchase:

TIP: You can find the model and serial numbers on the QR code label on the back of the unit by the power cord.

Technical Specifications

Voltage: 220-240V~, 50-60Hz

Watts: 2470W

Important Safeguards

Read all instructions before using your Ninja® Foodi® MAX Dual Zone Air Fryer. Basic safety precautions should always be followed:

• This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Keep the appliance and its cord out of reach of children.
• Children should not play with the appliance.
• DO NOT place or store anything on top of the product when in use.
• DO NOT place appliance on hot surfaces or near a hot gas or electric burner, on or in a heated oven or stovetop.
• NEVER use electrical sockets below counter.
• NEVER connect this appliance to an external timer switch or separate remote-control system.
• DO NOT use an extension cord.
• To protect against electrical shock, DO NOT immerse cord, plugs, or main unit housing in water or other liquid. Cook only in the drawers provided.
• Regularly inspect the appliance and power cord. DO NOT use the appliance if there is damage to the power cord or plug. If the appliance malfunctions or has been damaged in any way, immediately stop use and call Customer Service.
• ALWAYS ensure the appliance is properly assembled before use.
• DO NOT cover the air intake vent or air outlet while unit is operating.
• Before placing removable drawer into the main unit, ensure drawer and unit are clean and dry.
• This appliance is for household use only. DO NOT use this appliance for anything other than its intended use. DO NOT use in moving vehicles or boats. DO NOT use outdoors.
• Intended for worktop use only. Ensure the surface is level, clean and dry. DO NOT move the appliance when in use.
• DO NOT place the appliance near the edge of a worktop during operation.
• DO NOT use accessory attachments not recommended or sold by SharkNinja.
• ALWAYS ensure drawer is properly closed before operating.
• When using this appliance, provide adequate space above and on all sides for air circulation.
• DO NOT use the appliance without the removable drawers installed.
• DO NOT use this appliance for deep-frying.
• Prevent food contact with heating elements. DO NOT overfill when cooking.
• To prevent possible illness, use a thermometer to check that your food is cooked to the temperatures recommended.
• Should the unit emit black smoke, unplug immediately.
• DO NOT touch hot surfaces. Appliance surfaces are hot during and after operation. Use protective hot pads or insulated oven mitts and use available handles.
• Extreme caution must be used when the appliance contains hot food.
• Spilled food can cause serious burns. Keep appliance and cord away from children.
• The drawer and crisper plate become extremely hot during the cooking process. Avoid physical contact while removing the drawer or plate. ALWAYS place drawer or plate on a heat-resistant surface after removing.
• Cleaning and user maintenance should not be carried out by children.
• To disconnect, turn off any control to OFF, then unplug from socket when not in use and before cleaning. Allow to cool before cleaning.
• DO NOT clean with metal scouring pads.
• Please refer to the Cleaning & Maintenance section for regular maintenance of the appliance.

SAVE THESE INSTRUCTIONS

Parts

The air fryer includes:

• Main Unit
• Non-stick Drawers (One for each zone)
• Non-stick Crisper Plates (One for each drawer)
• Air Intake Vent
• Control Panel
• Air Outlet (located on back)

Getting to Know Your Air Fryer

Function Buttons

• MAX CRISP: Best for cooking smaller quantities of frozen food such as French fries and chicken nuggets, which may need a high temperature.
• AIR FRY: Use this function to give your food crispiness and crunch with little to no oil.
• ROAST: Use the unit as an oven for tender meats and more.
• REHEAT: Revive leftovers by gently warming them, leaving you with crispy results.
• DEHYDRATE: Dehydrate meats, fruits and vegetables for healthy snacks.
• BAKE: Create decadent baked treats and desserts.

Operating Buttons

• Zone 1 Control: Controls the output for the drawer on the left (Zone 1).
• Zone 2 Control: Controls the output for the drawer on the right (Zone 2).
• TEMP arrows: Use the up and down arrows to adjust the cook temperature before or during cooking.
• TIME arrows: Use the up and down arrows to adjust the cook time in any function before or during the cook cycle.
• SYNC button: Automatically syncs the cook times to ensure both zones finish at the same time, even if they have different cook times.
• MATCH button: Automatically matches zone 2 settings to those of zone 1 to cook a larger amount of the same food or cook different foods using the same function, temperature and time.
• START/STOP dial: Rotate the dial to select desired function. During cook cycle, press dial for START/STOP.
• Power button: Turns the unit on and shuts it off, stopping all cooking functions.
• Standby Mode: After 10 minutes with no interaction, the unit enters standby mode.
• Hold Mode: Appears when in SYNC mode. One zone cooks while the other holds until times sync.

Before First Use

1. Remove and discard all packaging materials, labels, and tape from the unit.
2. Remove all accessories and read this manual carefully, paying attention to safety instructions.
3. Wash the drawers and crisper plates in hot, soapy water, then rinse and dry thoroughly. The drawers and crisper plates are dishwasher safe, but hand-washing is recommended to extend their life. NEVER clean the main unit in the dishwasher.

Cooking in Your Air Fryer

Cooking with DualZone Technology

DualZone Technology utilizes two cooking zones. The Sync feature ensures both zones finish at the same time. For detailed instructions, see pages 9-12.

Synchronizing Cooking Times (SYNC)

1. Place ingredients in drawers and insert them into the unit.
2. Zone 1 will be illuminated. Select the desired cooking function using the dial. Use TEMP arrows to set temperature and TIME arrows to set time.
3. Select Zone 2, then select the desired cooking function, temperature, and time.
4. Press SYNC, then press the dial to begin cooking in the zone with the longest time. The other zone will display 'Hold'. The unit will beep and activate the second zone when both zones have the same time remaining.
5. When cooking is complete, the unit will beep and 'End' will appear on the display.
6. Remove ingredients by tipping them out or using silicone-tipped tongs/utensils.

NOTE: If food in one zone is done before the cook time is up, you can STOP A ZONE by selecting it and pressing START/STOP.

Matching Cooking Settings (MATCH)

To cook a larger amount of the same food, or cook different foods using the same function, temperature, and time:

1. Place ingredients in drawers and insert them into the unit.
2. Zone 1 will be illuminated. Select the desired cooking function, temperature, and time.
3. Press the MATCH button to copy Zone 1 settings to Zone 2. Press the dial to begin cooking in both zones.
4. 'End' will appear on both screens when cooking ends at the same time.
5. Remove ingredients by tipping them out or using silicone-tipped tongs/utensils.

Starting Both Zones at the Same Time, Ending at Different Times

1. Select Zone 1, then select the desired function, temperature, and time.
2. Use the TIME arrows to set the time.
3. Select Zone 2 and repeat steps 1 and 2.
4. Press the dial to begin cooking in both zones.

Ending the Cook Time in One Zone (While Using Both Zones)

1. Select the zone you would like to stop.
2. Press START/STOP to end cooking.
3. 'End' will appear on the display. Cooking will continue in the other zone.

Pausing Cooking

Cooking will automatically pause when a drawer is removed. Re-insert drawer to resume cooking.

When Using in SYNC or MATCH Mode

If you open a drawer, the other drawer will automatically pause so that cooking will still finish at the same time. Reinsert drawer to continue cooking in both zones.

NOTE: If during cooking when using SYNC a drawer is removed for longer than 2 minutes, the program will be cancelled. You will need to re-program each zone to resume cooking.

Cooking in a Single Zone

To turn on the unit, plug the power cord into a wall socket, then press the power button.

Max Crisp

NOTE: Temperature is preset to 240°C.

1. Install crisper plate in the drawer, then place ingredients in the drawer, and insert drawer in unit.
2. The unit will default to zone 1 (to use zone 2 instead, select zone 2). Select MAX CRISP.

Air Fry

NOTE: Temperature is preset to 200°C.

1. Install crisper plate in the drawer, then place ingredients in the drawer, and insert drawer in unit.
2. The unit will default to zone 1 (to use zone 2 instead, select zone 2). Select AIR FRY using the dial.
3. Use the TEMP arrows to set the desired temperature.
4. Use the TIME arrows to set the time in 1-minute increments up to 1 hour. Press the dial to begin cooking.
5. When cooking is complete, the unit will beep and 'End' will appear on the display.
6. Remove ingredients by tipping them out or using silicone-tipped tongs/utensils.

Roast

NOTE: Temperature is preset to 190°C.

1. Install crisper plate in the drawer (optional), then place ingredients in the drawer, and insert drawer in unit.
2. The unit will default to zone 1 (to use zone 2 instead, select zone 2). Select ROAST using the dial.
3. Use the TEMP arrows to set the desired temperature.
4. Use the TIME arrows to set the time in 1-minute increments up to 1 hour and in 5-minute increments from 1 to 4 hours. Press the dial to begin cooking.
5. When cooking is complete, the unit will beep and 'End' will appear on the display.
6. Remove ingredients by tipping them out or using silicone-tipped tongs/utensils.

Reheat

NOTE: Temperature is preset to 170°C.

1. Install crisper plate in the drawer (optional), then place ingredients in the drawer, and insert drawer in unit.
2. The unit will default to zone 1 (to use zone 2 instead, select zone 2). Select REHEAT using the dial.
3. Use the TEMP arrows to set the desired temperature.
4. Use the TIME arrows to set the time in 1-minute increments up to 1 hour. Press the dial to begin reheating.
5. When reheating is complete, the unit will beep and 'End' will appear on the display.
6. Remove ingredients by tipping them out or using silicone-tipped tongs/utensils.

Dehydrate

NOTE: Temperature is preset to 60°C.

1. Place a single layer of ingredients in the drawer. Install the crisper plate in the drawer on top of the ingredients and place another layer of ingredients on the crisper plate.
2. The unit will default to zone 1 (to use zone 2 instead, select zone 2). Select DEHYDRATE using the dial. Use the TEMP arrows to set the desired temperature.
3. Use the TIME arrows to set the time in 15-minute increments from 1 to 12 hours. Press the dial to begin dehydrating.
4. When cooking is complete, the unit will beep and 'End' will appear on the display.
5. Remove ingredients by tipping them out or using silicone-tipped tongs/utensils.

Bake

NOTE: Temperature is preset to 160°C.

1. Install crisper plate in the drawer (optional), then place ingredients in the drawer, and insert drawer in unit.
2. The unit will default to zone 1 (to use zone 2 instead, select zone 2). Select BAKE using the dial.
3. Use the TEMP arrows to set the desired temperature.
4. Use the TIME arrows to set the time in 1-minute increments up to 1 hour and in 5-minute increments from 1 to 4 hours. Press the dial to begin cooking.
5. When cooking is complete, the unit will beep and 'End' will appear on the display.
6. Remove ingredients by tipping them out or using silicone-tipped tongs/utensils.

Cleaning & Maintenance

The unit should be cleaned thoroughly after every use. Unplug the unit from the plug socket and wait until the unit is fully cooled before cleaning.

Helpful Tips

1. For consistent browning, arrange ingredients in an even layer on the bottom of the drawer with no overlapping. Shake halfway through cooking if ingredients overlap.
2. Cook temperature and time can be adjusted at any time during cooking. Select the zone, then use TEMP arrows to adjust temperature or TIME arrows to adjust time.
3. To convert recipes from a conventional oven, reduce the temperature by 10°C. Check food frequently to avoid overcooking.
4. Occasionally, the fan may blow lightweight foods around. Secure foods with cocktail sticks (e.g., the top slice of bread on a sandwich).
5. The crisper plates elevate ingredients for air circulation underneath and around for even, crisp results.
6. After selecting a cooking function, press the dial to begin cooking immediately with default temperature and time.
7. For best results with fresh vegetables and potatoes, use at least 1 tablespoon of oil. Add more oil as desired for crispiness.
8. For best results, check progress throughout cooking and remove food when desired level of brownness is achieved. Use an instant-read thermometer to monitor internal temperature of meat & fish.
9. For best results, remove ingredients immediately after the cook time is complete to avoid overcooking.

Troubleshooting Guide

• How do I adjust the temperature or time while using a single zone? Select the active zone, then use the TEMP arrows to adjust the temperature or the TIME arrows to adjust the time.
• How do I adjust the temperature or time while using dual zones? Select the desired zone, then use the TEMP arrows to adjust the temperature or the TIME arrows to adjust the time.
• Does the unit need to pre-heat? The unit does not need to be pre-heated.
• Can I cook different foods in each zone and not worry about cross contamination? Yes, both zones are self-contained with separate heating elements and fans.
• How do I pause the countdown? The countdown timer will pause automatically when you remove the drawers. Reinsert drawer within 10 minutes to resume cooking or the zone with the drawer open will be cancelled.
• How do I stop one zone when using both zones? To stop one zone, first press the zone button, then press the dial. To stop both zones, simply press the dial.
• Is the drawer safe to put on my worktop? The drawer will heat up during cooking. Use caution when handling, and place on heat-resistant surfaces only.
• When should I use the crisper plate? Use the crisper plate when you want food to come out crispy. The plate elevates the food in the drawer so that air can flow under and around it to cook ingredients evenly.
• Why didn't my food cook fully? Make sure the drawer is fully inserted during cooking. For consistent browning, make sure ingredients are arranged in an even layer on the bottom of the drawer with no overlapping. Shake drawer to toss ingredients for even crispiness. Cook temperature and time can be adjusted at any time during cooking.
• Why is my food burned? For best results, check progress throughout cooking and remove food when desired level of brownness has been achieved. Remove food immediately after the cook time is complete to avoid overcooking.
• Why do some ingredients blow around when air frying? Occasionally, the fan will blow lightweight foods around. Use wooden cocktail sticks to secure loose lightweight food.
• Can I air fry wet, battered ingredients? Yes, but use the proper breading technique: flour, then egg, then breadcrumbs. Press breadcrumbs firmly onto the battered ingredients so crumbs won't be blown off by the fan.
• Why is the unit beeping? Either the food is finished cooking or it indicates that the other zone has started cooking.
• Why did the display screen go black? The unit is in standby mode. Press the power button to turn it back on.
• Why is there an "E" message on the display screen? The unit is not functioning properly. Please contact Customer Service at 0800 862 0453.

Product Registration

Two (2) Year Limited Guarantee

When you buy a product in Europe as a consumer, you get the benefit of legal rights relating to the quality of the product (your "statutory rights"). These are enforceable against your retailer. Ninja provides a two-year manufacturer's guarantee. This guarantee applies to the Product if it is bought new and unused. Your statutory rights are unaffected.

How do I register my guarantee?

Register your guarantee online within 28 days of purchase. You will need:

• Model no.
• Serial Number (if available)
• Date of purchase
• Store of purchase

Visit www.ninjakitchen.eu to register online.

IMPORTANT

The guarantee covers your Product for 2 years starting on the date of purchase. Please keep the receipt at all times. A valid receipt is required to verify the information supplied and is necessary to validate your guarantee.

What are the benefits of registering my guarantee?

Registering your guarantee allows you to receive our newsletter with tips and advice. You'll also get instant confirmation that we've received your details.

For details of our privacy policy, visit www.ninjakitchen.eu.

How long are our Products guaranteed for?

Ninja products are guaranteed for two years.

What is covered by the guarantee?

Repair or replacement (at Ninja's discretion) of your Product, including all parts and labour, in case of any defect in design, materials, and workmanship. Our guarantee is in addition to your legal rights as a consumer.

What is not covered by the guarantee?

• Normal wear and tear.
• Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation or handling not in accordance with the Ninja® Instruction Manual.
• Use of the kitchen appliance for anything other than normal domestic household purposes.
• Use of parts not assembled or installed in accordance with the operating instructions.
• Use of parts and accessories which are not Ninja® Genuine Components.
• Faulty installation (except where installed by Ninja®).
• Repairs or alterations carried out by parties other than Ninja or its agents, unless you can show that the repairs or alterations are not related to the defect for which you exercise the guarantee.

What happens when my guarantee runs out?

Contact Ninja customer service for repair options after the guarantee has elapsed.

Where can I buy genuine Ninja spares and accessories?

Genuine Ninja spares and accessories are available at www.ninjakitchen.eu. Using non-Ninja spares may invalidate your manufacturer's guarantee.

Legal Information

Article L 217-4 of the Consumer Code: Seller's liability for conformity defects.

Article L 217-5 of the Consumer Code: Conditions for conformity.

Article L 217-12 of the Consumer Code: Action for conformity defects is time-barred after two years from delivery.

Article L 217-16 of the Consumer Code: Extension of guarantee period during repair.

Article 1641 of the Civil Code: Seller's liability for hidden defects.

Article 1648, al.1er of the Civil Code: Action for hidden defects must be brought within two years of discovery.