Kwikset Smart Lock Setup Guide

General Setup Process

1. Step 1: Initiate Add Lock

   Tap the ➕ icon in the upper right corner of the app, then select 'Add Lock'.

   [App Screenshot Description: The Kwikset app's main screen showing 'Main Home' with a list of devices. An arrow points to a '+' icon in the top right. Below the '+' icon, options like 'Add Home', 'Add Lock', 'Add User' are visible.]

2. Step 2: Select Your Lock Model

   Swipe through the available lock models and select the one you wish to add.

   [App Screenshot Description: A screen titled 'Choose Your Lock' displaying various Kwikset lock models including 'Halo Touchscreen', 'Halo Touch', 'Halo Keypad', and 'Aura'.]

3. Step 3: Choose Guide and Language

   Select your preferred guide experience (Interactive Guide or PDF Guide) and language. Tap 'Continue' to begin installation.

   [App Screenshot Description: A screen titled 'Choose Your Guide' offering 'Interactive Guide' and 'PDF Guide' options, with a language selection (e.g., ENGLISH) and a 'CONTINUE' button.]

   Note: If the lock is already installed, tap 'Skip Installation Guide'.

4. Step 4: Enable Bluetooth Pairing

   Follow the on-screen instructions to enable Bluetooth Pairing mode on your lock. Tap 'Continue' once complete.

   [App Screenshot Description: A screen showing instructions to enable Bluetooth Pairing, mentioning removing the interior battery cover and pressing/holding button 'A' for 3 seconds until the lock beeps and the LED flashes blue.]

   Note: The lock will exit Bluetooth Pairing mode after 30 seconds of inactivity.

5. Step 5: Search and Pair Lock

   The app will automatically search for the lock and start pairing once detected.

   [App Screenshot Description: A screen titled 'Bluetooth Pairing' showing a 'Searching for locks...' status and a 'SCAN AGAIN' button.]

   Note: If no lock is detected, tap 'Scan Again' or repeat Step 5.

6. Step 6: Confirm Lock Identification

   If the correct lock is identified, a flashing blue status light and a long beep will occur. Tap 'Yes' to confirm, or 'No' if unsuccessful.

   [App Screenshot Description: A prompt asking 'Did the lock beep and the blue LED light up?' with 'YES' and 'NO' buttons.]

   Note: If a flashing red status light appears, the lock may already be paired. Remove it from your phone's Bluetooth settings and repeat Step 4.

7. Step 7: Complete Pairing Request

   Your phone will display a Pairing Request message. Tap 'Pair' to complete lock pairing.

   [App Screenshot Description: A Bluetooth Pairing Request pop-up from the phone asking to pair with the lock, with 'Cancel' and 'Pair' buttons.]

   Note: If you tap 'Cancel', pairing will fail, and you'll need to repeat Step 4.

8. Step 8: Name Your Lock

   Once pairing is complete, you will be prompted to name your lock. This name can be changed later in the Lock Settings menu.

   [App Screenshot Description: A screen titled 'Name Your Lock' with a text field for the name (e.g., 'Garage Door') and a 'CONTINUE' button.]

   Note: You may see lock names like 'HALO LOCK: ####' or 'AU: ####'.

9. Step 9: Update Firmware

   You may be prompted to update the lock's firmware. Tap 'Update' to begin this process.

   [App Screenshot Description: A screen titled 'Update Firmware' stating 'This lock has a new firmware that must be updated before use' with requirements like battery levels and a distance to the phone. An 'UPDATE' button is visible.]

   Note: Firmware updates can take 3-6 minutes. Keep the phone within Bluetooth range and the app in the foreground.

10. Step 10: Set Up Access Code or Fingerprint

    For Halo Series (Touchscreen/Keypad/Touch): Add the first access code to your lock. You can modify or remove this later from the Access Codes menu.

    [App Screenshot Description: A screen titled 'Create Access Code' prompting for a 4-8 digit code, with an option to 'GENERATE RANDOM CODE' and a 'CONTINUE' button.]

    For Aura Series: Follow the on-screen instructions to add your fingerprint to the lock.

    [App Screenshot Description: A screen titled 'Add Fingerprint' with instructions like 'Lift, then Press again' to capture fingerprint edges.]

11. Step 11: Connect to Wi-Fi Network

    Follow on-screen instructions to connect the lock to your home Wi-Fi network. Tap 'Continue' to scan for networks.

    [App Screenshot Description: A screen titled 'Network Connection' with 'Network Requirements' listed, including router on, Wi-Fi coverage, 2.4GHz network, and having network name/password ready. A 'CONTINUE' button is present.]

    Note: Ensure your Wi-Fi network is 2.4GHz and WPA2 protected.

12. Step 12: Select Wi-Fi Network

    Select your home Wi-Fi network from the list of available networks.

    [App Screenshot Description: A screen titled 'Network Connection' showing a list of Wi-Fi networks (e.g., 'John Hub Network', 'ATT hotspot') with a 'SCAN AGAIN' button and a 'Manual Set Up' option.]

    Note: If your Wi-Fi doesn't appear, use 'Scan Again' or 'Manual Setup'.

13. Step 13: Enter Wi-Fi Password

    Enter the password for your Wi-Fi network and tap 'Continue'.

    [App Screenshot Description: A screen titled 'Enter Wi-Fi Password' with a password input field and a keyboard.]

14. Step 14: Finalize Lock Activation

    Once connected to Wi-Fi, the lock will contact the Kwikset cloud server for activation. This process may take 2-3 minutes.

    [App Screenshot Description: A screen titled 'Network Connection' showing 'We're Finalizing the Lock Activation' and 'Connecting to the Cloud'.]

15. Step 15: Complete Setup

    Tap 'Continue' to complete the setup and return to the main screen.

    [App Screenshot Description: A screen titled 'Complete Set Up' showing a success checklist (Lock Installed, Lock Added, Firmware Updated, Wi-Fi Connected, and either Access Code Added or Fingerprint Added depending on model) and a 'CONTINUE' button.]

16. Step 16: Lock Ready

    Congratulations! Your new lock is now ready to use.

    [App Screenshot Description: The main app screen showing the newly added lock (e.g., 'Garage Door') in a 'Locked' state with battery percentage.]