Adam Elements Ponte AirPad Wireless Charging Pad

Introduction

Thank you for purchasing an Adam Elements wireless charging pad! Before using your new device, please carefully read this instruction booklet so that you can use your new device safely and fully enjoy all of its features. Be sure to keep this instruction booklet in a safe place for later reference.

LED Indicator Light

This device features 2 LEDs for wireless charge status indication:

• Blue Light / Flash: Indicates standby mode or charging in progress.
• Blue Light / On: Indicates charging is complete.
• Red Light / Flash: Indicates an error, such as foreign object detection or incorrect placement.
• Red Light / On: Indicates over-temperature protection is active.

Note: The OCR output for the LED indicator diagram was partially unclear, but the descriptions above are based on typical wireless charger behavior and the provided text.

Product Features

• Slim and light design
• Qi compatible
• Self-adaptation auto-charge
• Foreign object detection
• Charge status indication
• Over temperature detection

Product Specifications

How to Use the Device

Powering On:

Power on the device using a 5V / 2A USB power adapter or through a computer connection. The Bio-Color LED (RED/BLUE) indicator will light up when the system powers on.

Diagram Description: Diagram 1 shows the wireless charging pad connected to a USB power adapter. Diagram 2 shows the wireless charging pad connected to a computer via USB. Both indicate the device powering on.

Charging a Device:

Place your Qi-compatible device onto the charging seat. Charging will begin regardless of the exact placement or orientation, indicated by the Blue LED staying ON and a buzzer alarm. For optimal charging, try to position the device near the center of the charging pad.

Note: If charging stops before completion, it may be due to the device's internal battery management system and is considered normal.

Diagram Description: A diagram shows a phone being placed on the wireless charging pad, with an arrow indicating the charging position.

Operating Notes

• Please read the instruction booklet packaged with the device before use.
• Do not use the device in environments hotter than the allowable temperature range or when the device is wet.
• Avoid placing the device in direct sunlight. Keep away from fire and heat sources.
• Do not submerge the device in water or place it in fire.
• Do not strike, throw, or attempt to open the device.
• Keep out of reach of infants and children.
• Do not allow children to use the device without adult supervision.
• Use an appropriate adapter when charging the device.
• Note that the battery should not be reverse-charged.
• Extended periods without use can cause battery degradation. Charge and discharge the battery fully at least once every 3 months.
• Store the device in a dry environment when not in use for extended periods.
• When disposing of the device, please do so properly at a battery recycling station. Do not dispose of it in regular trash.

Product Warranty Card

Adam Elements thanks you for purchasing this product. The warranty period begins on the day of purchase.

• Warranty Period: 12 months from the date of purchase.
• Services Provided at No Extra Charge: Within the warranty period, product quality issues will be fixed free-of-charge, requiring the seller's official stamp and a valid product serial number.
• Charged Services (Non-gratuitous): Apply in cases of missing/incorrect repair card information, invalid/missing serial numbers, damage from human actions (e.g., dropping, water damage), force majeure events (e.g., lightning, fire, flood), or use contrary to instructions.

The warranty card includes fields for:

• Name of Purchaser
• Phone Number
• Product Serial Number
• Date of Purchase
• Name of Seller
• Repair Log

Attention: Please keep this Product Repair Card handy for necessary repairs.

Regulatory Information

The document includes regulatory information in Chinese pertaining to low-power radio-frequency electrical machinery, likely for compliance in specific regions.

(Original text: 低功率電波輻射性電機管理辦法(930322) 第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。 前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機需忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。)

Federal Communication Commission (FCC) Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE: FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10cm between the radiator and your body.