Instruction Manual for Godox models including: Godox, LITEMONS, Bi-color, LED, Video, Light, LED6Bi
7 apr 2021 —
The guarantee and service offered by this document are not applicable in the following cases: . The product or accessory has expired its warranty period; .
File Info : application/pdf, 1 Pages, 1.18MB
DocumentDocumentGODOX -LED6BI 705-LED6BY-00 ±2mm 105G A 88*88 MM LED Bi-color LED Video Light Ta:45°C RoHS MADE IN CHINA Instruction Manual LED LED6Bi · · Type-C USB · · -10 - 40 Ta:45°C RoHS MADE IN CHINA 01. 06. 02. 07. 03. 1/4 08. 04. Type-C USB 09. 10. 05. 11. *1 Type-C USB *1 *1 *1 1. 1800mAh 2. 3. 5V 2A 1. 24 2. 3. 4. 5. 3 6. 3 7. 8. 2 100 9. USB 6 1.1. ON OFF 1.2. 6500K 1.3. 3200K- 1.4. 1/4 / 1/4 Ta:45°C RoHS MADE IN CHINA Ta:45°C RoHS MADE IN CHINA LED6Bi · 1800mAh 5V/2A · 6W · 3200K 6500K( ) 100% 360 · (LUX)(0.5 )( ) · CRI( ) 95 · 1.5H-10H -10~45 · 77*66*30 mm 100g · : : 0755-29609320(8062) 2 : 0755-25723423 : godox@godox.com GODOX Photo Equipment Co., Ltd. Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com godox.com Made in China QC PASS Ta:45°C RoHS MADE IN CHINA 705-LED6BY-00 ( ) ( ) () 12 3 12 0755-29609320-8062 Forward This Bi-color LED Video Light LED6Bi is a multifunctional light with adjust color temperature and light brightness. Suitable for almost all shooting occasions e.g. live, make up, portrait and product shooting, video and recording, etc. It can be used on camera independently or in combination with easy operation and great portability. Main Features · Easy to adjust color temperature and brightness · With built-in lithium battery and the light can be charged through Type-C USB port · Can be used independently or in combination with cold shoe mounting base and slots · Fashionable, easy operated and portable Warning As this product do not have waterproof function, please take measures of waterproof in rainy or damp environment. Do not use the flash unit in the presence of flammable gases, chemicals and other similar materials. In certain circumstance, these materials may be sensitive to the strong light emitting from this flash unit and fire or electromagnetic interference may result. As this product has built-in lithium battery, do not disassemble, impact, squeeze or put it into fire. If serious bulge occurs, please do not use. Do not use or store the product if the ambient temperature reads over the range of -10°C to 45°C. Please charge the product with included adapter and correctly operate it within the defined voltage and working temperate according to the instruction manual. Names of Parts Ta:45°C RoHS MADE IN CHINA 01. LED Beads 02. Diffusion 03. 1/4"Cold Shoe Mounting Base 04. Type-C USB Charging Port 05. Cold Shoe Slot 06. Cold Shoe Base 07. Power Switch 08. Color Temperature Adjustment Button 09. Brightness Adjustment Button 10. Battery Level Indicator 11. Button Indicator What's in the Box Light Body *1 Type-C USB Cable *1 Diffuser *1 Instruction Manual *1 Battery 1. This flash unit has built-in 1800mAh Li-ion battery which is non-detachable. 2. It is reliably safe. The inner circuit is against overcharge, overdischarge, overcurrent, and short circuit. 3. Charge the battery by using the 5V 2A charger. Cautions: 1. No over 24 hours' continuous charging. 2. Store in dry, cool, ventilated places. 3. Do not put aside or into fire. 4. Dead batteries should be disposed according to local regulations. 5. Please charge the battery to approx. 70% before being placed for long time. 6. If the battery had ceased using for over 3 months, please make a full recharge. 7. It's normal that the battery will be degraded after a period's usage for the battery life limitation. 8. It is recommended that the user can adjust the brightness to 100% only when the battery is fully charged for 2 grids. 9. After the battery power is used up, it is recommended that the USB power supply side charging and using should not be greater than the brightness of 6 gear. 1.2 Color Temperature Adjustment Press the upper adjustment button to increase the color temperature value while lower button to decrease. Long press the button to adjust the value from 3200K to 6500K in 9 levels quickly. When the color temperature value is up to the maximum, the indicator will be blinking. 1.3 Brightness adjustment Press the " " adjustment button to increase the brightness value while " " button to decrease. Long press the button to adjust the brightness value from 10 levels quickly. When the brightness value is up to the maximum, the indicator will be blinking. 1.4 Installation and Multi Usage The light can be fixed on the equipment with cold shoe or hot shoe through its cold shoe mounting base. It can be fixed on the equipment with 1/4"sockets e.g. pan-tilt, tripod and light stand. And the three cold shoe sockets enable this light to be installed on the equipment with cold shoe mounting base. The lights can be used in combination. Ta:45°C RoHS MADE IN CHINA Ta:45°C RoHS MADE IN CHINA Operation 1. Light Setting Ta:45°C RoHS MADE IN CHINA 1.1 Power ON/OFF Push the power switch to ON to turn on the light while OFF to turn it off. Technical Data Model LED6Bi Built-in Lithium Battery 1800mAh Power Source of Charging 5V/2A Power Max. 6W Color Temperature Range 3200K~6500K (in 9 levels) 100% Illuminance 360 (LUX)(0.5m)( ) CRI( ) 95 Brightness Range In 10 levels Duration 1.5H-10H Working Environment Temperature -10~45°C Dimension 77*66*30 mm Net Weight 100g Maintenance - Shut down the device immediately should abnormal operation be detected. - Avoid sudden impacts and the product should be dedusted regularly. - It is normal for the light beads to be warm when in use. Avoid continuous flashes if unnecessary. - Maintenance of the light must be performed by our authorized maintenance department which can provide original accessories. - This product, except consumables, is supported with a one-year warranty. Lithium battery is supported with six months warranty. - Unauthorized service will void the warranty. - If the product had failures or was wetted, do not use it until it is repaired by professionals. - Changes made to the specifications or designs may not be reflected in this manual. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Warranty Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you! Product Model Information Product Code Number Customer Name Information Contact Number Address Seller Name Information Contact Number Address Note: Date of Sale Note: This form shall be sealed by the seller. Applicable Products The document applies to the products listed on the Product Maintenance lnformation (see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached, etc.) aer not included in this warranty scope. Warranty Period The warranty period of products and accessories is implemented according to the relevant Product Maintenance lnformation. The warranhase date) when the product is bought for the first time, And the purchase daty period is calculated from the day(purcte is considered as the date registered on the warranty card when buying the product. How to Get the Maintenance Service If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation. Inapplicable Cases The guarantee and service offered by this document are not applicable in the following cases: . The product or accessory has expired its warranty period; . Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; . Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; . The original identifying information of product or accessory is modified, alternated, or removed; . No valid warranty card; . Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; . Breakage or damage caused by force majeure or accident; . Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope. Maintenance and Service Support Information The warranty period and service types of products are implemented according to the following Product Maintenance Information: Product Name Type Maintenance Warranty Service Period(month) Type Parts Circuit Board 12 Customer sends the product to designated site Battery 3 Customer sends the product to designated site Electrical parts e.g. battery charger, power cord, sync cable, etc. 12 Customer sends the product to designated site Other Items Flash tube, modeling lamp, lamp body, lamp cover, lockingdevice, package, etc. No Without warranty Godox After-sale Service Call 0755-29609320-8062Corel PDF Engine Version 16.0.0.707