Commercial Sink Parts List
Product Overview
This document provides a detailed parts list for a commercial double-basin sink assembly. It includes all necessary components and hardware for assembly. The primary components are the sink unit (A), a lower shelf (B), support legs (C), and a drain assembly (H).
Parts List
| Part Code | Description | Quantity |
|---|---|---|
| A | Double Basin Sink Unit with Drainboard | 1 |
| B | Lower Shelf | 1 |
| C | Support Legs | 4 |
| D | Bolts | 12 |
| E | Washers | 12 |
| F | Clips/Fasteners | 12 |
| G | Allen Wrench | 1 |
| H | Drain Assembly (Strainer and Flexible Pipe) | 1 |
Assembly Diagram Description
The main diagram illustrates the assembly of the commercial sink. The sink unit (A) is positioned above a lower shelf (B), which is supported by four legs (C). Bolts (D), washers (E), and fasteners (F) are used to connect these components, with an Allen wrench (G) provided for tightening the bolts. The drain assembly (H) is shown ready to be installed in the sink basin.
Key assembly steps involve attaching the legs (C) to the sink unit (A) and the shelf (B), and then securing the shelf to the legs. The drain assembly (H) is installed in the sink basin.
