NEFF international - Quality built-in kitchen appliances
User Manual for NEFF models including: D55ML66N1 Extractor Hood, D55ML66N1, Extractor Hood, Hood
▷ Only operate the gas burners with cook- ware on them. Operating multiple gas hobs at the same time generates a great deal of heat. A ventilation appliance ...
prieš 2 dienas — ▷ Only operate the gas burners with cook- ware on them. Operating multiple gas hobs at the same time generates a great deal of heat. A ventilation appliance ...
File Info : application/pdf, 20 Pages, 4.30MB
DocumentDocumentExtractor hood [en] User manual and installation in-
structions D55ML66N1 D57ML6.N1. D58ML66N1.
enSafety
Table of contents
INFORMATION FOR USE 1 Safety ................................................................... 2 2 Avoiding material damage.................................. 4 3 Environmental protection and saving en-
ergy ...................................................................... 4 4 Operating modes ................................................ 5 5 Familiarising yourself with your appliance ....... 5 6 Accessories......................................................... 6 7 Basic operation ................................................... 6 8 Cleaning and servicing ....................................... 7 9 Troubleshooting.................................................. 9 10 Disposal............................................................. 10 11 Customer Service.............................................. 10
12 INSTALLATION INSTRUCTIONS ...................... 10 12.4 Secure installation ............................................ 11
1Safety
Observe the following safety instructions. 1.1General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the
product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2Intended use This appliance is designed only to be built into kitchen units. Read the special installation instructions. The appliance can only be used safely if it is correctly installed according to the safety instructions. The installer is responsible for ensuring that the appliance works perfectly at its installation location. Only use this appliance: ¡ For extracting cooking vapour. ¡ In private households and in enclosed spaces in a domestic environment. ¡ Up to an altitude of max. 2000 m above sea level.
Do not use the appliance: ¡ With an external timer.
1.3Restriction on user group This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers. Do not let children play with the appliance. Children must not perform cleaning or user maintenance unless they are at least 15 years old and are being supervised. Keep children under the age of 8 years away from the appliance and power cable. 1.4Safe use
WARNING Risk of suffocation! Children may put packaging material over their heads or wrap themselves up in it and suffocate. Keep packaging material away from chil-
dren. Do not let children play with packaging ma-
terial. Children may breathe in or swallow small parts, causing them to suffocate. Keep small parts away from children. Do not let children play with small parts.
2
WARNING Risk of poisoning! Risk of poisoning from flue gases being drawn back in. Room-air-dependent heat-producing appliances (e.g. gas, oil, wood or coaloperated heaters, continuous flow heaters or water heaters) obtain combustion air from the room in which they are installed and discharge the exhaust gases into the open through an exhaust gas system (e.g. a chimney). With the extractor hood switched on, air is extracted from the kitchen and the adjacent rooms. Without an adequate supply of air, the air pressure falls below atmospheric pressure. Toxic gases from the flue or the extraction shaft are sucked back into the living space.
Always ensure adequate fresh air in the room if the appliance is being operated in exhaust air mode at the same time as a room-air-dependent heat-producing appliance is being operated.
It is only possible to safely operate the appliance if the pressure in the room in which the heating appliance is installed does not drop more than 4 Pa (0.04 mbar) below atmospheric pressure. This can be achieved whenever the air needed for combustion is able to enter through openings that cannot be sealed, for example in doors, windows, incoming/exhaust air wall boxes or by other technical means. An incoming/exhaust air wall box alone does not ensure compliance with the limit.
In any case, consult your responsible chimney sweep. They are able to assess the house's entire ventilation setup and will suggest the suitable ventilation measures to you.
Unrestricted operation is possible if the appliance is operated exclusively in circulating-air mode. WARNING Risk of fire!
Fatty deposits in the grease filters may catch fire. Never operate the appliance without a
grease filter.
Safetyen
Clean the grease filters regularly. Never work with naked flames close to the
appliance (e.g. flambéing). Do not install the appliance near a solid
fuel heating appliance (e.g. wood- or coalburning) unless the heating appliance has a sealed, non-removable cover. There must be no flying sparks. Hot oil or grease ignites very quickly. Always supervise hot oil and fat. Never extinguish burning oil or fat with water. Switch off the cooking zone. Extinguish flames carefully using a lid, fire blanket or something similar. When gas burners are in operation without any cookware placed on them, they can build up a lot of heat. A ventilation appliance installed above the cooker may become damaged or catch fire. Only operate the gas burners with cookware on them. Operating multiple gas hobs at the same time generates a great deal of heat. A ventilation appliance installed above the cooker may become damaged or catch fire. Only operate the gas hobs with cookware on them. Select the highest fan setting. Never operate two gas hobs simultaneously on the highest flame for longer than 15 minutes. Two gas hobs correspond to one large burner. Never operate large burners of more than 5 kW with the highest flame for longer than 15 minutes, e.g. a wok.
WARNING Risk of burns! The accessible parts of the appliance become hot during operation. Never touch these hot parts. Keep children at a safe distance. The appliance becomes hot during operation. Allow the appliance to cool down before
cleaning. WARNING Risk of injury!
Components inside the appliance may have sharp edges. Carefully clean the appliance interior. Changes to the electrical or mechanical assembly are dangerous and may lead to malfunctions. Do not make any changes to the electrical
or mechanical assembly.
3
enAvoiding material damage
The filter cover may swing out. Open the filter cover slowly. Take hold of the filter cover after opening
until it no longer swings out. Close the filter cover slowly. The light emitted by LED lights is very dazzling, and can damage the eyes (risk group 1). Do not look directly into the switched-on
LED lights for longer than 100 seconds. WARNING Risk of electric shock!
An ingress of moisture can cause an electric shock. Before cleaning, pull out the mains plug or
switch off the fuse in the fuse box. Do not use steam- or high-pressure clean-
ers to clean the appliance.
WARNING Risk of explosion! Highly caustic alkaline or highly acidic cleaning agents in conjunction with aluminium parts in the interior of the appliance may cause explosions. Never use highly caustic alkaline or highly
acidic cleaning agents. In particular, do not use commercial or industrial cleaning agents in conjunction with aluminium parts, e.g. grease filter on extractor hoods.
WARNING Risk of fire! Fatty deposits in the grease filters may catch fire. Clean the grease filters regularly.
WARNING Risk of injury! Improper repairs are dangerous. Repairs to the appliance should only be
carried out by trained specialist staff. If the appliance is defective, call Customer
Service. WARNING Risk of electric shock!
Penetrating moisture may cause an electric shock. Do not use wet sponge cloths.
2 Avoiding material damage
ATTENTION! Condensate may cause corrosion damage. To prevent condensation from building up, switch on
the appliance during cooking. If moisture gets into the controls, this may result in damage. Never clean controls with a wet cloth. Incorrect cleaning damages the surfaces. Follow the cleaning instructions. Do not use harsh or abrasive detergents. Clean stainless steel surfaces in the direction of the
finish only. Never clean controls with stainless steel cleaners.
Condensation that flows back in may damage the appliance. The air extraction duct must be installed with a
gradient of at least 1° from the appliance. If you put incorrect stress on the design elements, they may break off. Do not pull design elements. Do not place objects on the design elements or
hang objects from them. There is a risk of surface damage if you do not peel off the protective film. Remove the protective film from all parts of the ap-
pliance before using for the first time. Painted surfaces are easily damaged. Follow the cleaning instructions.
"Cleaning the appliance", Page 7 Ensure that the painted surfaces are not scratched.
3 Environmental protection and saving energy
3.1Disposing of packaging
The packaging materials are environmentally compatible and can be recycled. Sort the individual components by type and dispose
of them separately.
4
Operating modesen
3.2Saving energy
If you follow these instructions, your appliance will use less power. Adjust the fan speed to the amount of steam produced during cooking. ¡ The lower the fan speed, the less energy is con-
sumed. Only use the intensive mode as required. If cooking produces large amounts of steam, select a higher fan speed in good time. ¡ The odours are distributed around the room less.
Switch off the lighting if it is no longer required. ¡ When the lighting is switched off, it does not con-
sume any energy. Clean or replace the filters at regular intervals. ¡ The effectiveness of the filter is retained.
Put the cooking lid on. ¡ The cooking vapours and condensation are re-
duced. Only use the additional functions if required. ¡ Switching off additional functions reduces power
consumption.
4 Operating modes
You can use your appliance in air extraction mode or circulating-air mode.
4.1Air extraction mode
The air which is drawn in is cleaned by the grease filters and conveyed to the exterior by a pipe system.
The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels (not applicable to appliances that only discharge the air back into the room). ¡ If the exhaust air is to be conveyed
into a non-functioning smoke or exhaust gas flue, you must obtain the consent of the heating engineer responsible. ¡ If the exhaust air is conveyed through the external wall, a telescopic duct should be used.
4.2Air recirculation mode
The air which is drawn in is cleaned by the grease filters and an odour filter, and conveyed back into the room.
To bind odours in circulating-air mode, you must install an odour filter. The different options for operating the appliance in circulating-air mode can be found in our catalogue. Alternatively, ask your dealer. The required accessories are available from specialist retailers, from customer service or from the Online Shop.
5 Familiarising yourself with your appliance
5.1Controls
The controls are used to configure all functions of your appliance and to obtain information about the operating status.
Switching off the appliance Switching on fan setting 1 Switching on fan setting 2
Switching on fan setting 3 Switching the intermittent ventilation on or off Switching intensive mode on or off Switch the lighting on or off. Saturation indicator
5
enAccessories
6 Accessories
You can buy accessories from the after-sales service, from specialist retailers or online. Only use original accessories, as these have been specifically designed for your appliance. Accessories vary from one appliance to another. When purchasing accessories, always quote the exact product number (E no.) of your appliance. Page 10 You can find out which accessories are available for your appliance in our catalogue, in the online shop or from our after-sales service. www.neff-international.com
7 Basic operation
7.1Switching on the appliance
Press . a The appliance starts at fan setting 1.
7.2Setting a fan level
Press , or .
7.3Switching off the appliance
Press . Note: If the fan is running at level 2 or 3, press twice.
7.4Switching on intensive mode
If particularly strong odours or vapours develop, you can use intensive mode. Press . a After approx. six minutes, the appliance automatic-
ally switches to a lower fan setting. Note: You can switch on the intensive mode directly in off-mode. Once the six minutes has elapsed, the appliance is switched off again.
7.5Switching on the fan run-on
During the fan run-on, the appliance continues to run for a short time and then switches off automatically. 1. Switch on fan setting 1, 2 or 3. 2. Press and hold . a The fan run-on is activated; the button for the set fan
setting flashes. a The appliance automatically switches off after ap-
prox. 30 minutes.
Accessories Standard odor filter Standard recirculation kit Clean Air Plus air recirculation set Clean Air Plus odor filter (replacement) LongLife air recirculation set Long Life odour filter (replacement)
Order number Z5135X1 Z5135X3 Z51IXC1X6
Z51IXB1X6
Z51ITD1X1
Z51ITP0X0
7.6Switching on intermittent ventilation
With intermittent ventilation, the appliance switches the ventilation on and off at regular intervals. Press and hold . a The interval ventilation is activated, flashes. a The interval ventilation switches off after 24 hours.
7.7Switching off interval ventilation
Press and hold or press .
7.8Switching on the lighting
The lighting can be switched on and off independently of the ventilation system. Press .
7.9Setting the brightness
Press and hold until the required brightness is reached.
7.10Switching off the lighting
Press .
7.11Saturation indicator
The saturation indicator informs you when the grease filters need to be cleaned. After cleaning the grease filters, you should reset the saturation indicator. Resetting the saturation indicator Requirement: The appliance is switched off. Press and hold for three seconds. a The saturation indicator is reset. a goes out.
6
8 Cleaning and servicing
To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.
8.1Cleaning products
You can obtain suitable cleaning products from aftersales service or the online shop. ATTENTION! Unsuitable cleaning products may damage the surfaces of the appliance. Do not use harsh or abrasive detergents. Do not use cleaning products with a high alcohol
content. Do not use hard scouring pads or cleaning
sponges. Do not use any special cleaners for cleaning the ap-
pliance while it is hot. Only use glass cleaners, glass scrapers or stainless
steel care products if recommended in the cleaning instructions for the relevant part. Wash sponge cloths thoroughly before use.
8.2Cleaning the appliance
Clean the appliance as specified. This will ensure that the different parts and surfaces of the appliance are not damaged by incorrect cleaning or unsuitable cleaning products.
WARNING Risk of explosion! Highly caustic alkaline or highly acidic cleaning agents in conjunction with aluminium parts in the interior of the appliance may cause explosions. Never use highly caustic alkaline or highly acidic
cleaning agents. In particular, do not use commercial or industrial cleaning agents in conjunction with aluminium parts, e.g. grease filter on extractor hoods.
WARNING Risk of electric shock! An ingress of moisture can cause an electric shock. Before cleaning, pull out the mains plug or switch
off the fuse in the fuse box. Do not use steam- or high-pressure cleaners to
clean the appliance.
WARNING Risk of burns! The appliance becomes hot during operation. Allow the appliance to cool down before cleaning.
WARNING Risk of injury! Components inside the appliance may have sharp edges. Carefully clean the appliance interior. 1. Observe the information regarding the cleaning
agents. 2. Clean as follows, depending on the surface:
Clean stainless steel surfaces in the direction of the finish using a sponge cloth and hot soapy water.
Clean painted surfaces using a damp sponge cloth and hot soapy water.
Cleaning and servicingen
Clean aluminium using a soft cloth and glass cleaner.
Clean plastic using a soft cloth and glass cleaner.
Clean glass using a soft cloth and glass cleaner. 3. Dry with a soft cloth. 4. Apply a thin layer of the stainless steel cleaning
product to stainless steel surfaces using a soft cloth. You can obtain stainless steel cleaning products from the after-sales service or the online shop.
8.3Cleaning controls
WARNING Risk of electric shock! Penetrating moisture may cause an electric shock. Do not use wet sponge cloths. 1. Observe the information regarding the cleaning
agents. 2. Clean using a damp sponge cloth and hot soapy
water. 3. Dry with a soft cloth.
8.4Removing the grease filter
WARNING Risk of injury! The filter cover may swing out. Open the filter cover slowly. Take hold of the filter cover after opening until it no
longer swings out. Close the filter cover slowly. 1. Open the filter cover by pulling it downwards.
7
enCleaning and servicing
2. ATTENTION! Falling grease filters may damage the hob below. Grip below the grease filter with one hand. Open the locks on the grease filters.
3. Remove the grease filters from the holders. To prevent grease from dripping, hold the grease filter horizontally.
8.5Cleaning grease filters manually
The grease filters filter the grease from the cooking vapour. Regularly cleaned grease filters guarantee a high level of grease removal.
WARNING Risk of fire! Fatty deposits in the grease filters may catch fire. Requirement: The grease filters have been removed. "Removing the grease filter", Page 7 1. Observe the information regarding the cleaning
agents. 2. Soak the grease filter in hot soapy water.
Use special grease solvent for stubborn dirt. You can obtain grease solvents from after-sales service or the online shop. 3. Use a brush to clean the grease filters. 4. Rinse the grease filters thoroughly. 5. Allow the grease filters to drain.
8.6Cleaning grease filters in the dishwasher
The grease filters filter the grease from the cooking vapour. Regularly cleaned grease filters guarantee a high level of grease removal.
WARNING Risk of fire! Fatty deposits in the grease filters may catch fire. ATTENTION! The grease filters may become damaged if they are squeezed. Do not squeeze the grease filters. Note: When cleaning the grease filter in the dishwasher, light discolouration may occur. This discolouration has no effect on the performance of the metal grease filters. Requirement: The grease filters have been removed. "Removing the grease filter", Page 7 1. Observe the information regarding the cleaning
agents. 2. Place the grease filters loosely into the dishwasher.
Do not clean heavily soiled grease filters with utensils. Use special grease solvent for stubborn dirt. You can obtain grease solvents from after-sales service or the online shop. 3. Start the dishwasher. Select a temperature of no more than 70 °C. 4. Allow the grease filters to drain.
8.7Fitting grease filters
ATTENTION! Falling grease filters may damage the hob below. Grip below the grease filter with one hand. 1. Fit the grease filters. 2. Fold the grease filters upwards and engage the
locks. 3. Make sure that the locks engage. 4. Close the filter cover.
8.8Odour filter for recirculating air mode
Odour filters bind odorous substances in air recirculation mode. Regularly replaced odour filters guarantee a high level of odour removal. With normal use (approx. one hour a day), the odour filter must be replaced every 4 months. The odour filter cannot be cleaned or regenerated. You can obtain odour filters from the after-sales service or the online shop. Only use original odour filters. Removing the odour filter 1. Remove the grease filters. Page 7 2. Remove the odour filter from the holder.
3. Guide the odour filter around the motor.
8
4. Remove the odour filter.
Troubleshootingen 2. Guide the odour filter around the motor.
Fitting the odour filters 1. Slide the odour filter into the extractor hood.
3. Carefully slide the odour filter into the holder.
4. Install the grease filters.
9 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.
WARNING Risk of injury! Improper repairs are dangerous. Repairs to the appliance should only be carried out
by trained specialist staff. If the appliance is defective, call Customer Service.
WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out
by trained specialist staff. Only use genuine spare parts when repairing the
appliance. If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
9.1Replacing defective LED lights
Defective LED lights may be replaced by the manufacturer, their customer service or a qualified technician (electrician) only.
9.2Malfunctions
Fault The appliance is not working.
Cause and troubleshooting
The mains plug of the power cord is not plugged in. Connect the appliance to the power supply. The circuit breaker is faulty. Check the circuit breaker in the fuse box. There has been a power cut. Check whether the lighting in your kitchen or other appliances are working.
9
enDisposal
Fault The lighting does not work.
lights up permanently.
Cause and troubleshooting The LED lamp is defective. Call the after-sales service. Defective LED lights may be replaced by the manufacturer, their customer service or a
qualified technician (electrician) only.
The grease filters are saturated. Clean the grease filters. Page 8
10 Disposal
10.1Disposing of old appliance
Valuable raw materials can be reused by recycling. Dispose of the appliance in an environmentally
friendly manner. Information about current disposal methods are available from your specialist dealer or local authority.
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
11 Customer Service
Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area. Note: Under the terms of the manufacturer's warranty the use of Customer Service is free of charge. Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website. If you contact Customer Service, you will require the product number (E-Nr.) and the production number (FD) of your appliance.
The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.
11.1Product number (E-Nr.) and production number (FD)
You can find the product number (E-Nr.) and the production number (FD) on the appliance's rating plate. Depending on the model, the rating plate can be found: ¡ Inside the appliance (remove grease filters for ac-
cess). ¡ On top of the appliance. Make a note of your appliance's details and the Customer Service telephone number to find them again quickly.
12 Installation instructions
Observe this information when installing the appliance.
10
12.1Scope of delivery
After unpacking all parts, check for any damage in transit and completeness of the delivery.
10 x 12.2Appliance dimensions
You will find the dimensions of the appliance here
Installation instructionsen
12.4Secure installation Follow these safety instructions when installing the appliance.
WARNING Risk of poisoning! Risk of poisoning from flue gases being drawn back in. Room-air-dependent heat-producing appliances (e.g. gas, oil, wood or coaloperated heaters, continuous flow heaters or water heaters) obtain combustion air from the room in which they are installed and discharge the exhaust gases into the open through an exhaust gas system (e.g. a chimney). With the extractor hood switched on, air is extracted from the kitchen and the adjacent rooms. Without an adequate supply of air, the air pressure falls below atmospheric pressure. Toxic gases from the flue or the extraction shaft are sucked back into the living space.
12.3Safety clearances
Comply with the safety clearances for the appliance.
For Australia and New Zealand the minimum safety clearance above electrical cooktops must be 600 mm.
Always ensure adequate fresh air in the room if the appliance is being operated in exhaust air mode at the same time as a room-air-dependent heat-producing appliance is being operated.
It is only possible to safely operate the appliance if the pressure in the room in which the heating appliance is installed does not drop more than 4 Pa (0.04 mbar) below atmospheric pressure. This can be achieved whenever the air needed for combustion is able to enter through openings that cannot be sealed, for example in doors, windows, incoming/exhaust air wall boxes or by other technical means. An incoming/exhaust air wall box alone does not ensure compliance with the limit.
In any case, consult your responsible chimney sweep. They are able to assess the house's entire ventilation setup and will suggest the suitable ventilation measures to you.
Unrestricted operation is possible if the appliance is operated exclusively in circulating-air mode.
11
enInstallation instructions
Risk of poisoning from flue gases being drawn back in. If an extractor hood with an open-flued heat
production source is installed, the power supply for the extractor hood must be provided with a suitable safety switch. Risk of poisoning from flue gases being drawn back in. Do not emit the exhaust air into a smoke or exhaust gas flue that is in operation. Do not emit the exhaust air into a shaft that is used to ventilate installation rooms for heat-producing appliances. If the exhaust air is to be conveyed into a smoke or exhaust gas flue, you must obtain the consent of the heating engineer responsible.
WARNING Risk of suffocation! Children may put packaging material over their heads or wrap themselves up in it and suffocate. Keep packaging material away from chil-
dren. Do not let children play with packaging ma-
terial. WARNING Risk of fire!
Grease deposits in the grease filter may catch fire. The specified safety clearances must be
complied with in order to prevent a build-up of heat. Observe the specifications for your cooking appliances. If the installation instructions for the cooking appliances specify a different clearance, the larger of the two must always be provided for. If gas hobs and electric hobs are operated together, the largest specified clearance applies. The grease deposits in the grease filter may catch fire. Never work with naked flames close to the appliance (e.g. flambéing). Do not install the appliance near a heatproducing appliance for solid fuel (e.g. wood or coal) unless a closed, non-removable cover is present. There must be no flying sparks.
WARNING Risk of injury! Components inside the appliance may have sharp edges. Wear protective gloves.
12
The appliance may fall down if it has not been properly fastened in place. All fastening components must be fixed
firmly and securely in place. Changes to the electrical or mechanical assembly are dangerous and may lead to malfunctions. Do not make any changes to the electrical
or mechanical assembly. The filter cover may swing out. Open the filter cover slowly. Take hold of the filter cover after opening
until it no longer swings out. Close the filter cover slowly.
WARNING Risk of electric shock! Sharp-edged components inside the appliance may damage the connecting cable. Do not kink or trap the connecting cable. Incorrect installation is dangerous. Connect and operate the appliance only in
accordance with the specifications on the rating plate. Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing. The protective conductor system of the domestic electrical installation must be properly installed. Never equip the appliance with an external switching device, e.g. a timer or remote control. When the appliance is installed, the mains plug of the power cord must be freely accessible. If free access is not possible, an all-pole isolating switch must be installed in the permanent electrical installation according to the conditions of Overvoltage Category III and according to the installation regulations. When installing the appliance, check that the power cable is not trapped or damaged.
12.5General information
Follow these general instructions during the installation. ¡ For the installation, observe the currently valid build-
ing regulations and the regulations of the local electricity and gas suppliers. ¡ When discharging the exhaust air, the official and legal regulations, such as the regional building code., must be observed. ¡ In order to freely access the appliance for servicing, select an easy-to-reach installation site.
¡ The surfaces of the appliance are sensitive. Avoid damaging them during installation.
12.6Establishing the connection for the circulated air
1. Secure the exhaust pipe to the air pipe connector. 2. Connect the pipe to the opening on the fitted unit.
3. Screw the air guide grille to the fitted unit. 4. Seal the joints.
12.7Instructions for the electrical connection
In order to safely connect the appliance to the electrical system, follow these instructions.
WARNING Risk of electric shock! It must always be possible to disconnect the appliance from the electricity supply. The appliance must only be connected to a protective contact socket that has been correctly installed. The mains plug for the mains power cable must be
easily accessible after the appliance is installed. If this is not possible, an all-pole isolating switch
must be integrated into the permanent electrical installation according to the conditions of overvoltage category III and according to the installation regulations. The permanent electrical installation must only be wired by a professional electrician. We recommend installing a residual-current circuit breaker (RCCB) in the appliance's power supply circuit. Sharp-edged components inside the appliance may damage the connecting cable. Do not kink or trap the connecting cable. ¡ The connection data can be found on the rating plate. Page 10 ¡ The connecting cable is approx. 1.30 m long. ¡ This appliance complies with the EC interference suppression regulations. ¡ The appliance corresponds to protection class 1. You should therefore only use the appliance with a protective earth connection. ¡ Do not connect the appliance to the power supply during installation. ¡ Ensure that the protection against contact is guaranteed during installation.
12.8Information on the installation situation
¡ Install this appliance in a kitchen cupboard.
Installation instructionsen
¡ To install additional special accessory parts, observe the enclosed installation instructions.
¡ The width of the extractor hood must correspond at least with the width of the hob.
¡ To optimally detect the cooking vapours, install the appliance in the middle of the hob.
12.9Instructions for the exhaust air pipe
The appliance manufacturer does not provide any warranty for faults attributable to the pipeline. ¡ Use a short, straight exhaust air pipe with as large a
pipe diameter as possible. ¡ Long, rough exhaust air pipes, many pipe bends or
small pipe diameters reduce the suction power and increase the fan noise. ¡ Use an exhaust pipe that is made of non-combustible material. ¡ To prevent condensate from returning, fit the exhaust pipe with a 1° gradient from the appliance. Round pipes Use round pipes with an inner diameter of 150 mm (recommended) or at least 120 mm. Flat ducts Use flat ducts with an inner cross-section that corresponds to the diameter of the round pipes: ¡ Diameter of 150 mm corresponds to approx. 177 cm². ¡ Diameter of 120 mm corresponds to approx. 113 cm². ¡ Use sealing strips for different pipe diameters. ¡ Do not use any flat ducts with sharp bends.
12.10Instructions for the air extraction mode
For air extraction mode, a one-way flap should be installed. Notes ¡ If a one-way flap is not included with the appliance,
one can be ordered from a specialist retailer. ¡ If the exhaust air is conveyed through the external
wall, a telescopic duct should be used.
12.11Information about circulating-air mode
The appliance must only be operated when it is securely installed and the pipework is connected.
12.12Installation Checking the unit
1. Check whether the fitted unit is level and has sufficient load-bearing capacity. The max. weight of the appliance is 10 kg. Note: Note the furniture manufacturer's specifications with regard to the load-bearing capacity of the fitted unit.
2. Ensure that the fitted unit is heat-resistant up to 90 °C.
3. Ensure that the fitted unit is still stable after the cutouts have been made.
13
enInstallation instructions
Preparing the units Requirement: The unit is suitable for the installation. "Checking the unit", Page 13 1. Make the cut-out for the appliance.
2. Open the filter cover. Grasp the front corners of the filter cover and pull it down in a single, swift motion.
2. Make the cut-out for the exhaust air pipe either above the fitted unit or behind the fitted unit.
3. Undo the hinge lock and remove the filter cover.
4. Remove the grease filters. To avoid causing damage, do not bend the grease filters.
5. Undo the control panel cabling and cabling for the lighting.
Preparing the appliance 1. Fit the one-way flaps on the air outlet and click them
into place.
6. Undo the screws in the frame and remove the frame .
14
Preparing circulating-air mode 1. Position the filter retainer correctly on the motor
and turn it to the front until it clicks into place .
Installation instructionsen 4. Secure the frame and the appliance with screws.
2. Slide the odour filter into the filter retainer.
Installing the appliance 1. Insert the appliance into the opening in the fitted
unit and screw it to the fitted unit .
If the screws are not accessible from the exterior, the screws can also be fitted from the interior. 5. Restore the control panel cabling and the cabling for the lighting.
2. Tighten the fastening screws.
The plug can only be inserted into one position. 6. Ensure that the connector has engaged correctly.
3. Attach the frame and screw it to the appliance from below.
7. Fit the grease filters. To avoid causing damage, do not bend the grease filters.
8. Attach and close the filter cover.
15
enInstallation instructions Establishing the exhaust air connection 1. Secure the exhaust pipe to the air pipe connector.
2. Establish the connection to the exhaust air opening. 3. Seal the joints. Establishing the connection for the circulated air 1. Secure the exhaust pipe to the air pipe connector. 2. Connect the pipe to the opening on the fitted unit.
3. Screw the air guide grille to the fitted unit. 4. Seal the joints. Connecting to the power supply 1. Insert the mains plug into the protective contact
socket. 2. If a fixed connection is required, follow the instruc-
tions in the section "Instructions for the electrical connection", Page 13. Removing the appliance
WARNING Risk of injury! Components inside the appliance may have sharp edges. Wear protective gloves. 1. Disconnect the appliance from the power supply. 2. Loosen the exhaust pipe. 3. Open the filter cover if required. 4. Remove the grease filters.
To avoid causing damage, do not bend the grease filters. 5. Remove the frame. 6. Undo the control panel cabling and cabling for the lighting. 7. Loosen the screw connection with the fitted unit. 8. Slowly take the appliance down.
16
BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom
*9001604421*
9001604421 021126 en