User Guide for SAMSUNG models including: RX0W, PRDRX0W, MU90, PRDMU90, MU90 Wireless Mouse, MU90, Wireless Mouse

GPC Option Manual Wireless Mouse新


User Manual

Acrox Technologies Co., Ltd. RX0W Receiver PRDRX0W PRDRX0W rx0w

Acrox Technologies Co., Ltd. MU90 Wireless mouse PRDMU90 PRDMU90 mu90

Not Your Device? Search For Manuals / Datasheets:

File Info : application/pdf, 5 Pages, 497.64KB

Wireless Mouse User Guide




Right button

LED indicator

Scroll wheel Power switch

Battery cover

Connect button

Wireless signal receiver
The appearance of the product may difer from the igure above.
Connecting the mouse
1 Remove the wireless signal receiverfrom the bottom of the mouse and insert it into a USB port on the computer.

Wireless signal receiver 2 Set the power switchat the bottom of the mouse to theONposition. 3 The wireless mouse connection has been completed.
If the mouse does not work, separate and reconnect the wireless receiver, and press the Connect button on the mouse within 30 seconds.



Operating Voltage
Input Current
Input Voltage

Speciications 3VDC
50mA 3VDC

Correct disposal of this product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems.) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government offce, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.


15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may causeundesired operation.
15.105 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o ffand on, the user is encouraged to tryto correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. 15.21
Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment for body-worn configuration in direct contact to the phantom. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.

RSS-Gen Issue 4 8.4 This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Industry Canada ICES-003 Compliance Label: CAN ICES-3 (*)/NMB-3(*) * Insert either "A" or "B" but not both to identify the applicable Class of ITE. Co-located This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Cet appareil et son antenne (s) ne doivent pas tre situs ou fonctionner en conjonction avec une autre antenne ou metteur. IC Radiation Exposure Statement: mobile device This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.



Corel PDF Engine Version