Aroma Diffuser User Manual

Introduction

This Aroma Diffuser uses Ultrasonic waves to instantly vaporize water and essential oil in the tank, to produce a cool, dry fragrant mist.

The device features a Water Tank Cover, a Mist outlet, a Light indicator, a Drainage Outlet, the Water Tank, and the Main Body. The underside shows an Air Intake, a DC Socket, and an Outlet.

Operation

1. Ensure the product is placed on a stable, flat surface. Remove the upper lid and water cap vertically. (Refer to Fig1)
2. Connect the power:
   • For 24V models: Plug the DC plug of the AC adapter into the DC jack.
   • For 5V models: Plug the USB plug into a computer's USB port, AC adapter, or mobile power source. (Refer to Fig2)
3. Fill the water tank using the provided measure cup (not included in the package). Do not use high-temperature water. Pour water from the water pipe, paying attention to the water level. Do not exceed the MAX line. Do not add water while the product is operating. Drop essential oil vertically into the water tank. (Refer to Fig3)
4. Install the main body cover, aligning it with the original channel. Ensure it is seated correctly. Rotate the cover to adjust the desired spray direction. The upper cover must be in place to use the product. (Refer to Fig4)
5. Plug the AC adapter or USB plug into a power socket.
6. Press the "MIST" button to select the desired mist timer: 1H, 3H, 6H, or ON (continuous spray). Pressing the "MIST" button five times cycles through these modes (1H, 3H, 6H, ON, OFF). (Refer to Fig5)
7. Press the "LIGHT" button to turn on the LED light. Seven color options are available with varying brightness. (Refer to Fig6)
8. If the product is not used for a long time, drain all water from the tank, dry the unit, and store it properly. For reuse, clean the water tank with a neutral detergent before filling.
9. When the power is switched on, the Aromatherapy machine starts in its initial state (typically off).
10. The aromatherapy machine will automatically turn off if the water level in the tank is insufficient, even if the MIST switch is on.
11. The mist and light will automatically turn off when the water runs out.

Diagram References:

• Fig1: Illustrates removing the upper lid and water cap.
• Fig2: Shows plugging the DC plug into the DC jack.
• Fig3: Depicts adding water and essential oil into the tank.
• Fig4: Shows installing the main body cover and rotating it for spray direction.
• Fig5: Illustrates pressing the "MIST" button to select timer settings (1H, 3H, 6H, ON).
• Fig6: Shows pressing the "LIGHT" button to cycle through seven color options.

Precautions

• Maximum continuous operation time is 6 hours.
• The amount and intensity of mist produced may vary due to factors such as water type, humidity, temperature, and air currents; this is not considered a fault.
• The unit features automatic shut-off when the water level is low.
• Use only 100% natural essential oils. Oils containing chemical ingredients, flavors, or impurities may damage the product.
• Before switching to different essential oils, follow the maintenance instructions for cleaning the product.
• Do not fill the tank over the 500ML "MAX" line at any time.
• Do not switch on the power when the tank is empty.
• Do not touch the Ultrasonic vibration plate.
• Clean the unit regularly according to the maintenance instructions to prevent malfunction.
• Always unplug the unit from the power supply before performing any maintenance.
• For hygiene reasons, after use, pour away remaining water from the "DRAIN SIDE" of the tank and wipe with a clean, dry cloth.
• Essential oils can stain surfaces. In case of spillage, wipe away immediately with a soft cloth.
• Only use the provided measuring cup (not included in the package) to add water into the tank. Do not fill water directly from the water pipe.
• Do not allow mist to settle on furniture, clothing, or walls.
• Keep the diffuser away from direct sunshine, heat sources, and air conditioners or fans.
• Always place the diffuser on a stable, flat surface. Do not place it on carpets, duvets, or unstable areas.
• Keep the diffuser away from electronic equipment such as TVs and audio equipment.
• Do not tip the product, as this may cause water to enter the mechanism and lead to malfunction.
• Wait 60 minutes before restarting the unit to avoid damage to the Ultrasonic plate.
• Use tap water only. Do not use mineral water, sparkling water, or other types of water.
• Never move the product while it is in use.
• Do not touch any part of the product with wet hands.
• Keep out of reach of children and pets. Children should be supervised when using the product. The appliance is not suitable for children or persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
• Keep the power cord clear of pathways and do not pull it forcefully at any point.
• If smoke or a burning smell is detected, unplug the unit immediately.

Accidental Leakage

In the event the unit is knocked over or tipped during use, please follow these steps to avoid malfunction:

1. Unplug the unit and remove the cover.
2. Pour out any remaining water from the water tank.
3. Gently shake the unit to drain residual water, and then allow it to air dry naturally for at least 24 hours.

Water Pouring Guidance: When cleaning or emptying, tilt the unit so water flows away from the air outlet (indicated by a checkmark ✔️), not towards it (indicated by a cross ❌).

Maintenance

After using the diffuser 5-6 times, or every 3-5 days, please clean the product as follows:

1. Unplug the unit from the mains supply and remove the cover.
2. Pour out any remaining water from the tank.
3. Add a small amount of warm kitchen detergent remover and water. Use a swab to gently wipe the inside, then use a cleaning cloth to dry it lightly.
4. Refer to the diagrams for correct water pouring to avoid water entering the air outlet. Pour water away from the air outlet (left picture ✔️), not towards it (right picture ❌).
5. Do not use other acids or enzyme detergents, as they may release poisonous gas or cause malfunction.

Note: Be sure to use a mild detergent.

Troubleshooting

Please refer to the table below in the event of the product operating abnormally:

Specifications