Instructions for gosund models including: WP2, 2APUZ-WP2, 2APUZWP2, WP2 Smart Plug, Smart Plug, Plug
ShenZhen CuCo Smart Technology Co., Ltd. WP2 2APUZ-WP2 2APUZWP2 wp2
4.02.000.0675 v1.0 WP2-gosund/ 105g / 6 90X35mm 1mm Since the device only supports 2.4G Wi-Fi connection, please ensure that the mobile phone and the device are connected under 2.4G Wi-Fi simultaneously. What's in the Box Smart Plug x 1 User Manual x 1 At a Glance 1. Indicator Light 2. ON/OFF ButtoncAlso Reset Button 3. Two Independent Sockets Parameters Main Features Model: WP2 Input: 120V~, 50/60Hz 10A Max. Rated Power: 1200W Max. Voice Control APP Control Schedule & Timer Family Share No hub required V0 fireproof materials Reset Turn on the power, hold the Switch/Paring button for 5 seconds and let it go when the socket starts blinking fast the reset is successful. When the socket is in a new network environment, you need to restore the factory settings, and then reconnect to the network. Warnings and Precautions Important! Keep it out of the reach of children and pets. Do not use this product in humid environments or outdoors. It's for indoor use only. Do not place this product near heating devices, such as microwave ovens, stoves, or radiators. Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture, flammable gases, vapors and solvents. Do not disassemble, modify, or repair your device, and ask help from the authorized professionals for device malfunction. Do not use the device when it is no longer working properly or visibly damaged. Do not store the device for extended periods in poor ambient conditions. Do not insert your device to another one. Never use aggressive detergents such as alcohol or other chemical solutions because these could damage the casing or even impair the functioning of the product. Note: The image shown in the manual is indicative only. If there is inconsistent between the image and the actual product, the actual product shall govern. 4.02.000.0675 v1.0 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Warning Statements: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body. WP2 Smart Plug Instruction Made in ChinaAdobe PDF library 15.00 Adobe Illustrator(R) 24.0