Safety Information
- TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker).
- MINIMUM 75°C SUPPLY CONDUCTORS.
- CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
- If in doubt about electrical installation, consult a licensed electrician.
Please read and understand this entire manual before attempting to assemble, operate or install the product.
Preparation
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 25 minutes
Tools Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses.
Helpful Tools (not included): Wire strippers, Step ladder.
Package Contents
| Part | Description | Quantity |
|---|---|---|
| A | Finial | 1 |
| B | Washer (preassembled to Finial (A)) | 1 |
| C | Hex Nut (preassembled to Finial (A)) | 1 |
| D | Cover | 1 |
| E | Fixture | 1 |
| F | Glass (preassembled to Fixture (E)) | 6 |
| G | Post screw (preassembled to Fixture (E)) | 3 |
Hardware Contents (shown actual size)
| Part | Description | Quantity |
|---|---|---|
| AA | Wire nut | 3 |
| BB | Cap | 2 |
| CC | Rubber ring (preassembled to Cap (BB)) | 2 |
Assembly Instructions
- Wire Connections: Strip 3/4 in. of insulation from wire ends. Twist stripped ends together with pliers (not included): black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box.
- Secure Wire Nuts: Attach wire nuts (AA). Tape wire nuts (AA) and wires together.
- Attach Fixture to Post: Attach fixture (E) to post (not included) with post screws (G). Note: If there are no holes on the post, drill 0.2 in. pilot holes (0.2 in. diameter).
- Install Light Bulbs: Install light bulbs (not included). Use one 60-watt max. standard-base bulbs or one 13-watt standard-base CFL bulbs.
- Assemble Finial and Cover: Remove hex nut (C) and washer (B) from finial (A). Install finial (A) with washer (B) and hex nut (C) to cover (D). Place cover (D) and rubber ring (CC) onto fixture (E), securing with caps (BB).
Care and Maintenance
Shut off main power supply before wiping product with damp cloth or window cleaner. Do not use abrasives.
Troubleshooting
| Problem | Possible Cause | Corrective Action |
|---|---|---|
| Bulb won't light. |
|
|
| Fuse blows or circuit breaker trips when light is turned on. | Crossed wires or power wire is grounding out. | Check wire connections. |
Replacement Parts List
For replacement parts, call the customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
| Part | Description | Part # |
|---|---|---|
| AA | Wire nut | 375-022000 |
| BB | Cap | 110-080800 |
| CC | Rubber ring | 410-100400 |
| G | Post screw | 109-040802 |
Warranty
The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for three (3) years from the date of purchase. If within this period the product is found to be defective in material or workmanship, the product must be returned, with a copy of the original sales receipt as proof of purchase in the original carton, to the place of purchase. The manufacturer will, at its option, repair, replace or refund the original purchase price to the consumer. This warranty does not cover fixtures becoming defective due to misuse, accidental damage, improper handling and/or installation and specifically excludes liability for direct, incidental or consequential damages. As some states do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state.
