Features
- Using only 1 set of keyboard, mouse to control 2 computer devices and 3 monitors.
- Available to use keyboard and mouse without any delay after switching input sources.
- With 4 USB 3.0 hub ports, it is possible to connect bar code scanner, USB hard drive or other USB devices to KVM.
- Supports resolution up to 7680*4320@60Hz.
- Supports USB 3.0 transmission rate up to 5Gbps.
- Supports front panel buttons and external switch button to control KVM to switch inputs.
- Supports Windows/Vista/XP and Mac OS, Linux and Unix, Plug and Play.
Specifications
| Specification | Value |
|---|---|
| Support Resolution | 7680*4320@60Hz |
| Video bandwidth | up to 48Gbps |
| USB transfer rate | up to 5Gbps |
| Power consumption | MAX 12W |
| Input voltages | DC/12V |
| Operating Temperature range | (-5 to +45 °C) |
| Operating Humidity range | 5 to 90%RH (No Condensation) |
| Storage Temperature | -20°C ~ 60°C / -4°F ~ 140°F |
| Dimension (L x W x H) | 150X65X48.5 (mm) |
Package Contents
- 1. KVM Switcher (1PC)
- 2. DC12V power adapter (1PC)
- 3. USB_A type cable (2PC)
- 4. External controller kits (1PC)
- 5. User manual (1PC)
Connection Diagrams
Front Panel Diagram
The front panel features four USB 3.0 ports labeled for [Printer], [USB Disk], [Mouse], and [Keyboard]. It also includes a switch button for PC1/PC2 input selection, PC1/PC2 indicator lights, and an external control 3.5mm jack. An external control switch button is also shown.
HDMI KVM Switch Diagram
This diagram illustrates the rear connections for an HDMI KVM switch. It shows an ON/OFF power switch [Power Switch] and a DC12V power adapter input [DC Power Input]. Two PC inputs (PC1 IN, PC2 IN) are present, each with USB and HDMI connections (HDMI1 A/B/C for PC1, HDMI2 A/B/C for PC2). Three HDMI outputs (OUT A, OUT B, OUT C) are available for connecting display devices.
HDMI&DP KVM Switch Diagram
This diagram shows connections for a hybrid HDMI and DisplayPort KVM switch. It includes an ON/OFF power switch [Power Switch] and DC12V power adapter input [DC Power Input]. Two PC inputs (PC1 IN, PC2 IN) are present, with PC1 connecting via USB and DP1 A/B+HDMI1, and PC2 via USB and DP2 A/B+HDMI2. Outputs include DP OUTA/B for DisplayPort displays and HDMI OUTC for an HDMI display.
DP KVM Switch Diagram
This diagram depicts a DisplayPort KVM switch. It features an ON/OFF power switch [Power Switch] and DC12V power adapter input [DC Power Input]. Two PC inputs (PC1 IN, PC2 IN) are shown, each with USB and DisplayPort connections (DP1 A/B/C for PC1, DP2 A/B/C for PC2). Three DisplayPort outputs (OUT A, OUT B, OUT C) are provided for connecting DisplayPort monitors.
Troubleshooting
Before power on, please check the connection lines carefully and ensure that all interfaces are normally connected. The common troubleshooting methods are shown below:
| No. | Trouble Description | Causes and Solutions |
|---|---|---|
| 1 | Non Power Connected |
|
| 2 | Display has no image |
|
| 3 | USB not working |
|
