OSRAM OPTOTRONIC Intelligent – DALI LEDset LT2 (SELV)

Product Family Features

• Line frequency: 0 Hz | 50 Hz | 60 Hz
• Versatile DALI window driver up to 80 W due to flexible output characteristic
• Supply voltage: 220...240 V
• Available with output current range: up to 2,100 mA
• Constant Lumen Output (CLO)
• Integrated customizable thermal management (Driver Guard)
• DALI-2 certified (Part -101,-102 and -207)

Product Family Benefits

• Fully programmable via software (DALI Interface)
• Flexible current setting (LEDset2)
• Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
• High-quality dimming of 1...100 % by amplitude dimming (except 80 W versions)
• High quality of light thanks to <1% output ripple current
• Very high efficiency
• Very low standby power consumption: < 0.15 W *
• Fulfill safety requirement due to overload, overtemperature, Hot Plug protection

Versatile Scope of Application due to OSRAM DALI Technology

• Easy to use in corridors and restrooms because of three-level Corridor function
• Touch DIM application: easy to control via pushbutton or sensor
• Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
• Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
• Feedback of power consumption and operating hours (Fit for SMART GRID)
• Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
• Luminaire information for easy maintenance

Areas of Application

• Linear lighting for office, education, storage areas and retail
• Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
• Suitable for luminaires of protection class I

Technical Data

Electrical Data

Power, Efficiency, and Protection Data

Voltage and Surge Capability

Output Current Details

Output Characteristics

Dimensions & Weight

Cable Cross-section and Dimensions

Temperatures & Operating Conditions

Lifespan & Capabilities

Dimming and Control Features

Protection and Connectivity

Programming Features

Operational Modes and Settings

Certificates & Standards and Logistical Data

Product Dimensions and Layout

The diagrams illustrate the physical dimensions and layout of the OPTOTRONIC Intelligent DALI LEDset LT2 models. For the OTI DALI 35/220...240/700 LT2 L G2 and OTI DALI 50/220...240/1A4 LT2 L G2, the length is indicated as 359 mm and the width as 30 mm, with a side view showing a height of 21 mm. For the OTI DALI 80/220...240/1A6 LT2 L and OTI DALI 80/220...240/2A1 LT2 L models, the length is approximately 360 mm, with a mounting hole spacing of 350 mm. These models also feature a width of 30 mm and a height of 21 mm.

Application Advice

For more detailed application information and graphics please see product datasheet.

Sales and Technical Support

Sales and Technical Support www.osram.com

Download Data

• User instruction OPTOTRONIC LED Power Supply
• Product Datasheet Product datasheet OTI DALI 35 G2
• Certificates OTI DALI LT2 L G2 CB DE1 60134 040320
• Certificates OT ENEC 40038447 210721
• Certificates OT EMC 40038827 290621
• Declarations of conformity EATON(CEAG)-Conformity declaration AN00953 OTI DALI 35220-240700 LT2 L G2
• Declarations of conformity INOTEC-Conformity declaration AN00953 OTI DALI 35220-240700 LT2 L G2
• Declarations of conformity OTi DALI LT2 L G2 UK DoC 4281083 180221
• Declarations of conformity OTI DALI LT2 L G2 CE 3634324 180221
• Declarations of conformity EATON(CEAG)-Conformity declaration AM06315_OTiDALI35_220-240_700_LT2_L_G2
• Declarations of conformity INOTEC- Conformity declaration AM06315_OTiDALI35_220-240_700_LT2_L_G2
• CAD data OTI DALI LT2L G2 IGS 060220
• CAD data OTI DALI LT2L G2 STEP 060220
• CAD Data 2-dim OTI DALI LT2L G2 CAD2PDF 060220
• CAD data 3-dim OTI DALI LT2L G2 CAD3PDF 060220
• Product Datasheet Product datasheet OTI DALI 50 G2
• Declarations of conformity EATON(CEAG)-Conformity declaration AN00954 OTI DALI 50220-2401A4 LT2 L G2
• Declarations of conformity INOTEC-Conformity declaration AN00954 OTI DALI 50220-2401A4 LT2 L G2
• Declarations of conformity EATON(CEAG)-Conformity declaration AM06314_OTiDALI50_220-240_1A4_LT2_L_G2
• Declarations of conformity INOTEC- Conformity declaration AM06314_OTiDALI50_220-240_1A4_LT2_L_G2
• User instruction OPTOTRONIC LED Power Supply
• Product Datasheet 491301_Datasheet_OTi DALI 80220-2401A6 LT2 L
• Certificates OTI DALI 80 1A6 LT2 L INOTEC AM20234 270420
• Certificates OT FIT OTI DALI LT2 CB DE1 63464 060520
• Certificates 489311_CB Certificate OTi DALI LT2 L
• Certificates 494640_CE Declaration OTi DALI linear
• Declarations of conformity OTi DALI LT2 L CE 3366462 121119
• CAD data OTI DALI 80 LT2 L IGS 270220
• CAD data OTI DALI 80 LT2 L STEP 270220
• CAD Data 2-dim OTI DALI 80 LT2 L CAD2PDF 270220
• CAD data 3-dim OTI DALI 80 LT2 L CAD3PDF 270220
• Product Datasheet 491386_Datasheet_OTi DALI 80220-2402A1 LT2 L

Ecodesign Regulation Information

Intended for use with LED modules.

The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Logistical Data

The mentioned product code describes the smallest quantity unit which can be ordered. One shipping unit can contain one or more single products. When placing an order, for the quantity please enter single or multiples of a shipping unit.

Data Privacy

This OSRAM driver can be configured using the Tuner4TRONIC software. This requires registering on www.myosram.com and downloading the Tuner4TRONIC software from the Internet. The Tuner4TRONIC software enables users to access and view the operational data of a luminaire or driver via the corresponding programming interfaces. A password key (Config Lock) must be set up in the driver via the Tuner4TRONIC software in order to control which users can access and view operational data.

Follow the instructions for password setup. To grant an external person or company rights to access or view operational data, you can assign password keys. In this case, however, you are responsible for ensuring that the third party concerned takes notice of the information described here. However, OSRAM can read out operating data from devices for maintenance and service purposes even when a password key has been assigned. In individual cases, OSRAM will also use its access rights in order to optimize or improve driver hardware and driver functions. In accordance with data privacy principles, any user of operating data (luminaire manufacturers, third parties with access rights) must ensure that personal data (e.g. name, address, location IDs) are only merged with the prior written consent of the person (end user) concerned. The respective user of the operating data is responsible for providing evidence of consent.

Disclaimer

Subject to change without notice. Errors and omission excepted. Always make sure to use the most recent release.