Axxess Integrate - Comprehensive Interface Products for Vehicle Upgrades
Metra Online | Welcome to Metra Auto Parts Online WarehouseAxxess Integrate - Comprehensive Interface Products for Vehicle Upgrades
Installation Guide for MeTra models including: 95-7641B, 120957641B, 95-7641B Dash Kit, Dash Kit
Metra 95-7641B Dash Kit Install a new receiver in 2022-up Nissan Frontier vehicles — shallow-mount, "L"-shaped, or double-DIN (4" tall) radios at Crutchfield
File Info : application/pdf, 8 Pages, 585.25KB
DocumentDocument95-7641B INSTALLATION INSTRUCTIONS Nissan Frontier 2022-Up Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications KIT FEATURES · ISO DDIN radio provision · ISO DIN radio provision with pocket sold separately · Painted scratch resistant matte black · Most full size DDIN radios will require a small cut in the sub dash for clearance. Shallow chassis radios should not require any cutting. KIT COMPONENTS · A) Radio trim panel · B) Radio brackets · C) Panel clips (4) · D) #8 x 3/8" Phillips screws (4) A B C D TABLE OF CONTENTS Dash Disassembly..............................................2-4 Kit Preparation.......................................................5 Kit Assembly ..........................................................6 WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: 70-7552 Antenna Adapter: 40-EU10 Visit axxessinterfaces.com for more audio/video and steering wheel control interface options. TOOLS REQUIRED · Panel removal tool · Phillips screwdriver Metra. The World's Best Kits.® MetraOnline.com Attention! With the key out of the ignition, disconnect the negative battery terminal before installing this product. Ensure that all installation connections are secure before cycling the ignition to test this product. © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 2/13/24 INST95-7641B 1. Remove the rubber pad from the pocket above the radio then remove (2) Phillips screws under pad. (Figure A) 2. Unclip and remove the panel from inside the pocket. (Figure B) 3. Remove the (2) Phillips screws from the top of the radio brackets inside the pocket area. (Figure C) Continued on the next page (Figure A) DASH DISASSEMBLY (Figure B) (Figure C) 2 386.257.1187 | MetraOnline.com 4. Unclip and remove the switch panel below the A/C controls. (Figure D) 5. Remove (2) Phillips screws exposed behind switch panel on bottom of A/C controls. (Figure E) 6. Unclip and remove the A/C control panel. (Figure F) Continued on the next page (Figure D) DASH DISASSEMBLY (CONT.) (Figure E) (Figure F) REV. 2/13/2024 INST95-7641B 3 7. Remove (2) Phillips screws from the bottom of the radio brackets. (Figure G) 8. Unclip and remove the radio assembly. (Figure H) Continue to Kit Preparation DASH DISASSEMBLY (CONT.) (Figure G) (Figure H) 4 386.257.1187 | MetraOnline.com 1. Most full size DDIN radios will require a small cut in the sub dash for clearance. Note: Shallow chassis radios should not require any cutting. (Figure A) 2. Attach the (4) supplied panel clips to the radio housing. (Figure B) Continue to Kit Assembly KIT PREPARATION Remove shaded area (Figure A) (Figure B) REV. 2/13/2024 INST95-7641B 5 1. Attach the radio brackets to the radio trim panel using (4) #8 x 3/8" Phillips screws supplied. (Figure A) 2. Slide the radio into the completed assembly, and then secure it to the assembly using screws supplied with the radio. (Figure B) 3. Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/ or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation. 4. Reassemble the dash in reverse order of disassembly. (Figure A) KIT ASSEMBLY (Figure B) 6 386.257.1187 | MetraOnline.com REV. 2/13/2024 INST95-7641B 7 95-7641B INSTALLATION INSTRUCTIONS Having difficulties? We're here to help. Contact our Tech Support line at: 386-257-1187 Or via email at: techsupport@metra-autosound.com Tech Support Hours (Eastern Standard Time) Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 5:00 PM Sunday: 10:00 AM - 4:00 PM Metra. The World's Best Kits.® MetraOnline.com Metra recommends MECP certified technicians © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 2/13/24 INST95-7641B