JadooBox HD Easy Setup Guide

Entertainment Gateway to the World

Introduction

Congratulations! With your new jadooBox, you have the power to watch Live Worldwide TV channels, millions of internet videos, Sports, Movies and more.

Device Overview

JadooBox (front)

The front panel features the Jadoo logo and indicator lights.

JadooBox (back)

The back panel provides connectivity ports:

Power (+5V)
Ethernet
HDMI
A/V Output
USB Input (x2)

Package Contents

jadooBox HD unit
HDMI Cable
jadooBox Remote with Battery (CR2032, 3V) - Please Note: before using the remote, remove the film to activate the battery.
Wireless USB Device
Power Cable
RCA Cable
Ethernet Cable

Setup Instructions

Step 1: Connecting the Audio & Video

(using the HDMI Cable -or- RCA Cable)

Connect the jadooBox to your TV. Use an HDMI cable to connect the HDMI port on the jadooBox to the HDMI IN port on your TV. Alternatively, use the RCA cable to connect the RCA Out ports (Video and Audio) on the jadooBox to the corresponding Video In and Audio In ports on your TV.

Step 2: Connecting the Power

(using the Power Cable)

Connect the power cable to the jadooBox and then plug it into a wall outlet. CAUTION: THE POWER CONNECTIONS SHOULD BE MADE AFTER ALL OTHER CONNECTIONS.

Step 3: Connecting to the Router

(using the Ethernet Cable or a Wireless USB Device)

Option A: Ethernet Cable Connection

Connect one end of the Ethernet cable to your router and the other end to the Ethernet port on the jadooBox.

Option B: Wireless Connection

Insert the Wireless USB Device into one of the available USB ports on the jadooBox.

Tip: To finish the wireless connection setup, navigate to Settings, then NETWORK from the jadooBox Menu and run the wireless wizard.

Frequently Asked Questions

I can't see the JadooTV startup screen or menu?

Make sure that the TV input is set to the port where the JadooBox video cable is connected.

Do I need a router, and which one?

A router is needed when you want to connect more than one device (PC and JadooBox) to your internet connection. The router connects between your modem and your JadooBox or PC. Most routers these days are wireless. This means you can place JadooBox in a different room from where your router is and connect wirelessly to your network by using the wireless USB adapter. Wireless routers recommended are of 802.11g type from manufacturers Linksys or Netgear.

How do I finish setting up the wireless connection?

To finish the wireless connection setup, select Settings, and then Network from the JadooTV Menu and run the wireless wizard.

What wireless security modes are supported?

Only WEP wireless security modes are supported. WPA security mode is not supported at this time. See your router's documentation on how to change your security mode from WPA to WEP.

How much network bandwidth is required for proper operation of JadooBox?

At least 1 Mbps connection is required from your internet service provider. To check your downlink connection speed, select Settings, then Network Speed Test from the JadooTV Menu and run the speed test.

How do I get the best signal from my remote?

Keep the JadooBox in line with the remote for good reception of the remote signal.

How do I change the size of the video playback window?

Use the Func +/- buttons on the remote to increase or decrease the video playback window size.

How can I power cycle the JadooBox?

To power cycle the JadooBox, press and hold the red Power button on the remote for 8 seconds.

How do I download and save a movie?

JadooBox has no storage of its own, so simply connect a USB flash drive or a FAT32 formatted USB external hard drive to either of the USB ports at the back of JadooBox.

How do I rate, bookmark, pause, download, delete, or find related videos when I am in YouTube?

Press the Menu key to see a list of all the available functions.

How do I find more information on a selected video?

Press the Info key to see more information.

How do I switch from an HDMI video connection to an RCA (composite) connection?

After removing the HDMI cable, connect the RCA cable in the A/V socket and power cycle by removing the power cable and inserting it again. The JadooBox defaults to HDMI when the HDMI cable is connected.

Technical Support

Online: www.jadootv.com/support

Phone (US): 510-402-4982

Phone (UK): 0203-371-8688

Email Support: support@jadootv.com

How to Use the jadooBox Remote?

On/Off: [power-symbol]
Stop: STOP
Menu/Options: MENU
Mute: MUTE
Info: INFO
Search: SEARCH
Previous Video: [previous-arrow]
Select/Play: [select-button]
Rewind: [rewind-arrow]
Fast Forward: [fast-forward-arrow]
Go Back One Level: BACK
Next Video: [next-arrow]
Volume Up: VOLUME +
Page Up/Zoom In: FUNC +
Volume Down: VOLUME -
Page Down/Zoom Out: FUNC -
Home: HOME