Concrete Equipment and Tools - From Site Preparation to Surface Preparation | Flextool
Owner's Manual for Mikasa models including: MTR-40H, Tamping Trench Rammer, MTR-40H Tamping Trench Rammer, Trench Rammer, Rammer, Tamping Rammer
Mikasa Tamping Rammer MTR-40H - 46 kg - Honda 3 hp Petrol â Flextool
File Info : application/pdf, 11 Pages, 632.44KB
DocumentDocumentSERVICE MANUAL MIKASA TAMPING RAMMER MTR-40H
FOR MORE INFORMATION CONTACT US ON 1300 353 986 OR VISIT flextool.com.au
Version 2.0 (February 2023)
EXCLUSIVE TO
Parchem Construction Supplies Pty Ltd
1956 Dandenong Road, Clayton VIC 3168, Australia Phone: 1300 353 986 flextool.com.au ABN 80 069 961 968
This manual summarises our best knowledge of the product based on the information available at the time of publication. You should read this manual carefully and consider the information in the context of how the product will be used. Our responsibility for products sold is subject to our standard terms and conditions of sale.
DISCLAIMER: Any advice, recommendation, information, assistance or service provided by us in this manual is given in good faith and is believed by us to be appropriate and reliable. However, any advice, recommendation, information, assistance or service provided by us is provided without liability or responsibility PROVIDED THAT the foregoing shall not exclude, limit, restrict or modify the right entitlements and remedies conferred upon any person or the liabilities imposed upon us by any condition or warranty implied by Commonwealth, State or Territory Act or ordinance void or prohibiting such exclusion limitation or modification. The product can be expected to perform as indicated in this manual so long as operation and operational procedures of the individual products are followed as recommended in this manual.
Design and technical specifications may be subject to changes.
© This publication is copyright. All rights are reserved. Flextool is a registered trade mark of Parchem Construction Supplies Pty Ltd. Mikasa is a registered trade mark of Mikasa Sangyo Co. Ltd, used under licence.
FOR MORE INFORMATION CONTACT US ON 1300 353 986 OR VISIT flextool.com.au
EXCLUSIVE TO