User Manual for HYDRA KOOL models including: KGL-RM-40-S, KGL-RM-40-S Floor Model Open Cooler with Rear Doors and Shutter, Cooler with Rear Doors and Shutter, Doors and Shutter, Shutter, KGL-RM-60-S, KGL-RM-40-R, KGL-RM-60-R
Hydra Kool KGL-RM-S - Floor Model Open Cooler with Rear Doors & Shutte – iFoodEquipment.ca
File Info : application/pdf, 4 Pages, 2.74MB
DocumentDocumentMANUAL SHUTTER REAR LOADING MODELS KGL-RM-(40,60)-S KGL-RM-(40, 60)-R GRAB-N-GO LOW PROFILE CASE FRONT AND REAR LOADING, MANUAL SHUTTER CASE HOLDS 38°F TO 40°F · FORCED AIR REFRIGERATION · OPEN FRONT FRONT AND REAR LOADING · KEY OPERATED MANUAL SHUTTER AVAILABLE WITH A BLUE DECAL *CONTACT OUR SALES DEPARTMENT FOR MORE INFORMATION IN COMPLIANCE WITH NATIONAL ENERGY STANDARDS ® ® SELF CONTAINED GRAB-N-GO LOW PROFILE CASE FRONT AND REAR LOADING MANUAL SHUTTER Model KGL-RM-40-S KGL-RM-60-S O.A. Length (inches) 41 60.6 Volume FT3 Front 12.98 19.85 Electrical 115 Volts Compressor H.P F.L.A 5/8 8.9 3/4 16 LIGHTS Fans HTRS 2.32 3.45 EVAP Pan 6.7 6.7 Total Amps 16.8 25 NEMA 115 V Plug 5-20P - Weight lbs No With Crate Crate 419 585 510 750 Crate Size (inches) L" W" H" 44 39 74 64 39 74 Model KGL-RM-40-R KGL-RM-60-R O.A. Length (inches) 41 60.6 115 Volts Total Amps 0.9 1.4 B.T.U 4190 5835 Weight lbs No Crate With Crate 361 515 430 635 REMOTE SPECIAL FEATURES Locking back doors for rear loading Manual pull-down shutter STANDARD FEATURES Silver colored PVC coated steel front panel with a blue decal CFC free injected foam insulation PVC coated steel gray interior Black steel kick plate Foamed polystyrene black end panels Tempered side glass LED lighting in canopy and under shelves Temperature and defrost regulated by a digital controller Slide out condensing unit on self-contained units Removable condensate evaporating pan for easy cleaning Product stops on all shelves Height adjustable, shelves can be tilted Leveling feet OPTIONAL FEATURES Stainless steel exterior and / or interior Other colors available Additional shelves Price tag molding Product dividers Condensate evaporating pan for remote cases Stainless steel legs are adjustable from 5-1/8" to 7-5/8" KGL-RM caster kit WARRANTY One year parts and labor with an additional four years on the compressor (part only) 3560 NW 56th St Fort Lauderdale, FL USA 33309 Tel: 786.600.4687 / Toll Free: 844.218.8477 / Fax: 786.661.4100 5659 Royalmount Ave. Montreal, QC, Canada H4P 2P9 Tel: 514.737.9701 / Toll Free: 888.275.4538 / Fax: 514.342.3854 Toll free: 877.453.8832 04/2020 sales@mvpgroupcorp.com / mvpgroupcorp.com KGL-RM CASTER KIT NOTE These cases are engineered to operate in locations not exceeding 75°F and 55% R.H. These cases are designed to operate using R452a refrigerant. Alternate refrigerants available by special order. O.A. length includes (2) ends at 1-1/2" each. Ventilation grills at front and back cannot be blocked. B.T.U.'s are calculated at 14°F (evaporator) and 90°F (ambient). Remote cases are provided with an expansion valve and a liquid solenoid for pump down cycle. On remote cases, if no floor drain is provided, a condensate evaporating pan must be ordered and 6.7 amps added to the amp load. Remote cases must be hard wired no plugs. Hydra - Kool is a registered trademark of MVP Group Corp. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ELECTRIC SHUTTER REAR LOADING MODELS KGL-RS-(40, 60)-S KGL-RS-(40, 60)-R GRAB-N-GO LOW PROFILE CASE FRONT AND REAR LOADING, ELECTRIC SHUTTER CASE HOLDS 38°F TO 40°F · FORCED AIR REFRIGERATION · OPEN FRONT FRONT AND REAR LOADING · KEY OPERATED ELECTRIC SHUTTER · TEMPERATURE RECORDER AVAILABLE WITH A BLUE DECAL *CONTACT OUR SALES DEPARTMENT FOR MORE INFORMATION IN COMPLIANCE WITH NATIONAL ENERGY STANDARDS ® ® SELF CONTAINED GRAB-N-GO LOW PROFILE CASE FRONT AND REAR LOADING ELECTRIC SHUTTER Model KGL-RS-40-S KGL-RS-60-S Model KGL-RS-40-R KGL-RS-60-R O.A. Length (inches) 41 60.6 Volume FT3 Front 12.98 19.85 Electrical 115 Volts Compressor H.P F.L.A 5/8 8.9 3/4 16 LIGHTS Fans HTRS 1.29 2.35 EVAP Pan 6.7 6.7 Total Amps 16.8 25 NEMA 115 V Plug HW Weight lbs No With Crate Crate 419 585 510 750 O.A. Length (inches) 41 60.6 115 Volts Total Amps 0.9 1.4 B.T.U 4190 5835 Weight lbs No Crate With Crate 361 515 430 635 HW = Hard wired Remote cases are hard wired Crate Size (inches) L" W" H" 44 39 74 64 39 74 REMOTE SPECIAL FEATURES Locking back doors for rear loading Key operated electric shutter STANDARD FEATURES Silver colored PVC coated steel front panel with a silver decal CFC free injected foam insulation PVC coated steel gray interior Dark Gray anthracite kick plate Foamed polystyrene black end panels Tempered side glass LED lighting in canopy and under shelves Temperature and defrost regulated by a digital controller Removable condensate evaporating pan for easy cleaning Product stops on all shelves Height adjustable, shelves can be tilted Leveling feet OPTIONAL FEATURES Graphics on upper and lower front panels Stainless steel exterior and / or interior Other colors available Additional shelves Price tag molding Product dividers Condensate evaporating pan for remote cases KGL-RS caster kit for self contained units only WARRANTY One year parts and labor with an additional four years on the compressor (part only) 3560 NW 56th St Fort Lauderdale, FL USA 33309 Tel: 786.600.4687 / Toll Free: 844.218.8477 / Fax: 786.661.4100 5659 Royalmount Ave. Montreal, QC, Canada H4P 2P9 Tel: 514.737.9701 / Toll Free: 888.275.4538 / Fax: 514.342.3854 Toll free: 877.453.8832 06/2017 sales@mvpgroupcorp.com / mvpgroupcorp.com Standard MOUNTING Optional Levelling Feet Caster Kit NOTE These cases are engineered to operate in locations not exceeding 75°F and 55% R.H. These cases are designed to operate using R452a refrigerant. Alternate refrigerants available by special order. O.A. length includes (2) ends at 1-1/2" each. Ventilation grills at front and back cannot be blocked. B.T.U.'s are calculated at 14°F (evaporator) and 90°F (ambient). Remote cases are provided with an expansion valve and a liquid solenoid for pump down cycle. must be ordered and 6.7 amps added to the amp load. Remote cases must be hard wired no plugs. Hydra - Kool is a registered trademark of MVP Group Corp. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE