Dimension Guide
Top freezer refrigerator
Model Information
Model: ETB4600B-A
Product Dimensions
Diagrams show the refrigerator from front, side, and top views, illustrating key dimensions.
Front View: Shows overall Height (H) and Height to top of cabinet (H1). Width is labeled (W).
Side View: Shows overall Depth (D) and Height (H).
Top View: Shows Cabinet Width (W1), Cabinet Depth (D1), and Door Width (W). A 90-degree door swing arc is indicated.
Bench Alignment Note: The front face of the bench should be aligned to the front corner edge of the cabinet.
| Top Mount Models | Door width (W) | Total depth (D) | Maximum height (H) | Cabinet width (W1) | Cabinet depth (D1) | Depth door open (D2) | Cabinet height (H1) |
|---|---|---|---|---|---|---|---|
| ETB4600B-A | 699 mm | 723 mm | 1725 mm | 693 mm | 641 mm | 1360 mm | 1705 mm |
Recommended Airspaces
Diagrams illustrate recommended airspaces around the refrigerator.
Cupboard Clearance: If a cupboard is above the refrigerator with a rear gap less than 100 mm (Y), the recommended clearance at the top of the refrigerator increases from 50mm to 90mm (X) minimum.
Door Clearance: A diagram shows a minimum recommended airspace of 30mm between the cabinet and the door, and 50mm for the top clearance.
Corner Installation: When positioned in a corner area, a spacing of at least 350mm on the hinge side is required to allow the doors to open sufficiently for removing bins and shelves.
Important Installation Notes
Important: Ensure that the access to your kitchen (including doorways, corridors, island benches, etc.) allows sufficient clearance to move your fridge into position.
Please note: Dimensions provided are for guidance only. All customers must refer to the user manual supplied with the product for detailed installation instructions.
