Sony RDR-VX410 Service Manual
RMT-D224P
Model Variations
- AEP Model
- UK Model
- French Model
- Australian Model
- New Zealand Model
Refer to the SERVICE MANUAL of VHS MECHANICAL ADJUSTMENT MANUAL VII for MECHANICAL ADJUSTMENTS. (9-921-790-11)
Specifications
System
DVD Recorder Section
- Laser: Semiconductor laser
- Audio recording format: Dolby Digital
- Video recording format: MPEG Video
VCR Section
- Format: VHS PAL standard
- Video recording system: Rotary head helical scanning FM system
- Video heads: Double azimuth four heads
- Tape speed: SP: PAL 23.39 mm/s, LP: PAL 11.70 mm/s, EP: NTSC 11.12 mm/s (playback only)
- Maximum recording/playback time: 10 hrs. in LP mode (with E300 tape)
- Rewind time: Approx. 1 min (with E180 tape)
Tuner Section
- Channel coverage:
- RDR-VX410 (B, E1, E2): PAL (B/G, D/K), VHF E2 to E12, VHF Italian channel A to H, UHF E21 to E69, CATV S01 to S05, S1 to S41, HYPER S21 to S41
- RDR-VX410 (B): SECAM (L) (For French model), VHF F2 to F10, UHF F21 to F69, CATV B to Q, HYPER S21 to S41
- RDR-VX410 (GI): PAL (I), VHF: Ireland A to J, South Africa 4 to 13, UHF: B21 to B69, CATV: S01 to S05, S1 to S20, HYPER: S21 to S41
- RDR-VX410 (AU2): PAL (B/G), VHF: E2 to E12, UHF: E21 to E69, CATV: S01 to S05, S1 to S41, PAL (B/B), VHF: R1 to R12, UHF: R21 to R69
Note: The above channel coverage merely ensures the channel reception within these ranges. It does not guarantee the ability to receive signals in all circumstances.
Aerial out
- 75-ohm asymmetrical aerial socket
Timer Section
- Clock: Quartz locked
- Timer indication: 24-hour cycle
- Timer setting: 12 programmes in total (max.)
Inputs and outputs
- LINE 2 IN: VIDEO IN, phono jack (1) (Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative), AUDIO IN, phono jacks (2) (Input level: 327 mVrms, Input impedance: more than 47 kilohms)
- S VIDEO: 4-pin, mini-DIN jack (1) (Y: 1.0 Vp-p, unbalanced, sync negative, C: 0.286 Vp-p, load impedance 75 ohms)
Continued on next page
Exploded Views
8-1 Exploded Views
NOTE:
- -XX, -X mean standardized parts, so they may have some differences from the original one.
- Items marked "*" are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items.
8-1-1 Cabinet Assembly
Diagram showing the cabinet assembly with various parts labeled with numbers and some marked as 'not supplied'. Key components include W202, W272, P030, W252, P025, C015, A001, C003, C012, C001. Some parts are indicated as critical for safety and should only be replaced with the specified part number.
8-1-2 VCR Mechanical Parts (Top Side)
Diagram illustrating the top side of the VCR mechanical assembly. Components include K490, K250, K240, K110, K350, G001, G555, G450, G510, G420, G480, K546, G680, G560, K340, G527, G070, G520, G060, G681, B410, G546, B440. Many parts are marked as 'not supplied'.
8-1-3 VCR Mechanical Parts (Bottom Side)
Diagram showing the bottom side of the VCR mechanical assembly. Components include B462, G542, B561, B560, B570. Several parts are marked as 'not supplied'.
