Wi-Fi Dimmer
QS-WIFI-D01-TRIAC
Instruction Manual
Technical Specifications
| Product type | WIFI dimmer module |
| Voltage | 220-240V AC |
| Max. load | 150W (LED) |
| WIFI Frequency | 2.4GHz - 2.4835GHz |
| Operation temp. | -10°C - +40°C |
| Case temp. | Tc: +80°C (Max.) |
| Operation range | ≤ 200 m |
| Dims (WxDxH) | 51x47x22 mm |
| IP rating | IP20 |
| Warranty | 3 years |
| Dimming type | Trailing Edge |
| EMC Standard (EMC) | EN 300 328 V2.1.1 (2016-11), EN 301489-1 V2.1.1 (2017-02), EN 301489-17 V3.1.1 (2017-02), EN 62311: 2008, EN 55015:2013 +A1:2015, EN 61547:2009 |
| Safety Standard (LVD) | IEC 60669-2-1:2002/AMD1:2008/ AMD2:2015, IEC 60669-1:1998/ AMD1:1999/AMD2:2006, EN 60669-2-1:2004+A1: 2009+ A2:2010, EN 60669-1:2018 |
| RoHS Standard (RoHS) | 2011/65/EU, (EU) 2015/683 |
| Radio Equipment (RED) | ETSI EN 300 328 V2.1.1 (2016-11) |
Product Size and Mounting
The Wi-Fi Dimmer module has compact dimensions of 51mm (width) x 47mm (depth) x 22mm (height). It is designed for typical switch box mounting.
Typical Switch Box Mounting: The module fits within a standard electrical switch box, with terminals clearly marked for connection.
Certifications: ✅ RoHS, ✅ CE
Wiring Diagram
The wiring diagram shows connections for Live (L), Neutral (N), and the Switched Live/Load (L-S) output. Ensure power is turned off before wiring.
Wiring Instructions:
- Turn off the power supply before carrying out any electrical installation work.
- Connect wires according to the wiring diagram (L, N, L-S terminals).
- Insert the module into the junction box.
- Turn on the power supply and follow dimmer module configuration instructions.
Note: For optimal configuration, keep your smartphone close to the dimmer module and ensure a minimum 50% Wi-Fi signal strength.
Installation
Warnings:
- Installation must be carried out by a qualified electrician in accordance with local regulations.
- Keep the device out of reach of children.
- Keep the device away from water, damp, or hot environments.
- Install the device away from strong signal sources (e.g., microwave ovens) that may cause signal interruption.
- Avoid obstructions like concrete walls or metallic materials, which may reduce the device's effective operation range.
- Do NOT attempt to disassemble, repair, or modify the device.
Manual Override
The dimmer module supports manual override functions via a connected push switch:
- Short Push (<1s): Toggles permanent on/off function.
- Long Push (>1s): Adjusts the brightness level.
Notes:
- Adjustments made via the app or the push switch can overwrite each other; the last adjustment is remembered.
- App control is synchronized with the manual switch.
- The "S" terminals can be left unconnected if manual control is not required.
Frequently Asked Questions (FAQ)
- Q1: What should I do if I can't configure the dimmer module?
-
- Ensure the device is powered on.
- Verify your mobile and the dimmer module are connected to the same 2.4 GHz Wi-Fi network.
- Check for stable internet conditions.
- Confirm the Wi-Fi password entered in the app is correct.
- Ensure the wiring is correct.
- Q2: What devices can be connected to the Wi-Fi dimmer module?
- All types of lamps, including fluorescent and LED lamps.
- Q3: What happens if the Wi-Fi goes off?
- You can still control the connected light using your traditional switch. The device will automatically reconnect to your Wi-Fi network once the Wi-Fi is active again.
- Q4: What should I do if I change the Wi-Fi network or password?
- You need to reconnect the Wi-Fi dimmer module to the new Wi-Fi network as per the App User Manual instructions.
- Q5: How do I reset the device?
- Press the traditional dimmer off switch (connected to the Wi-Fi dimmer module). Then, press and hold the switch for 10 seconds or more until the connected lamp flickers quickly, indicating it has entered configuration mode. If you wait more than 120 seconds, you may need to repeat this process.
App User Manual and Setup
The Wi-Fi Dimmer is controlled via a mobile app, offering global and local operation.
App Features:
- Global international operation: Control your devices from anywhere.
- Schedule timer: Set automated lighting schedules.
- Voice control: Works with Google Home and Amazon Alexa.
- Device Sharing: Share control with family and friends.
- In-house local operation: Control devices within your home network.
Setup Steps:
- Register/Login: Open the app, register or log in using your mobile number or email address. Set a password and create a family group.
- Enter Configuration Mode: Turn off the traditional dimmer switch connected to the Wi-Fi dimmer module. Press and hold the switch for 10 seconds until the connected light blinks rapidly, indicating it's in configuration mode.
- Add Device: In the app, tap the "+" icon (top right) to add a device. Select "Smart Lighting" or the appropriate device category.
- Connect to Wi-Fi: Ensure your smartphone and the Wi-Fi Dimmer are on the same 2.4 GHz Wi-Fi network. Confirm the light is blinking rapidly (twice per second) to proceed.
- Pairing: The pairing process typically takes 10-120 seconds, depending on your network conditions.
- Device Added: Once pairing is complete, the Wi-Fi Dimmer will appear in the "All Device" list within the app.
- Voice Control & Sharing: Connect to voice assistants like Amazon Alexa or Google Assistant for voice control. You can also share device access with family members.
App Download: Scan the QR code to download the Tuya Smart App, or search for "Tuya Smart" in the App Store or Google Play.
Enjoy smart home automation for lighting control with the Tuya Smart app, offering control from anywhere in the world or via voice commands at home.
