Desktop CD Player with Speakers

Notice!!!

Please remove the protect paper from the CD Player before turning on the CD Player, otherwise, you will destroy the device !!!

KC-806

CE FC RoHS [WEEE symbol]

WARNING

1. Never play a cracked CD or a CD is NOT clean, that would damage the laser.
2. Please remove the protection paper CD from the CD Player before powering on, otherwise, the laser could be damaged.
3. Never touch the laser of the device. Always use the dust cover to prevent dust from collecting on the laser.
4. If the device is unable to scan discs properly, use a standard commercially available cleaner to clean the laser optics. Other cleaning methods may damage the laser optics.

Accessories:

• CD player x1
• 5V-2A USB adaptor x1
• Remote control x1
• User manual x1
• Type-C Power cord x1

Specifications:

• CD format support: CD, CD-R, CD-RW, MP3, WMA.
• FM Radio Range: 76.0MHz-108.0MHz
• Speaker: 40mm X 2
• Rated impedance: 4Ω
• Speaker output: 3W x 2
• Power supply: AC100-240V, 50Hz/60Hz
• Power/Switch cable length: 1 m
• Dimension of main unit/package: 189x189x69mm/207x215x77mm
• Net weight/Gross weight: 520g/900g
• Color: white/blue/pink/black

Main Features:

• LED screen display
• USB flash reading/playing
• Full-band FM radio
• Bluetooth V5.0
• Standard 3.5mm audio input/output port
• Loop Playback modes: Repeat One, Repeat All, Shuffle, Normal
• Support A-B repeat
• Support scheduled shutdown

Device and Remote Control Overview

CD Player Unit

The CD player unit features a central CD lid (7). On the top panel are the Mode switch (1), Volume- (2), Volume+ (3), Prev (4), Next (5), and an LED screen (6). The loudspeaker (8) is on the front. The side panel includes a USB port (10), AUX port (11), Play/Pause button (12), and a DC-5V IN port (13).

Remote Control

The remote control has the following buttons: ON/OFF (1), Bluetooth mode (2), Volume +/- (3), Prev (4), Next (5), Play/Pause (6), Stop playing (7), USB mode (8), FM/Searching (9), a numeric keypad for selection (0-9) (10), CD mode (11), playback modes (Normal / Repeat One / Repeat All / Shuffle) (12), A-B Repeat (13), AUX mode (14), Time / Alarm clock (15), and Battery compartment (16).

Operation Modes

Bluetooth Transmission

1. Insert a disc and press the mode switch button to enter CD Mode for playback.
2. To pair Bluetooth devices, press and hold the Bluetooth mode button on the remote for three seconds until the Bluetooth icon on the CD LED display flashes. The CD player enters Bluetooth Transfer method.
3. When the Bluetooth icon on the LED display stops flashing and remains on, Bluetooth pairing is successful.

Note: For optimal pairing, ensure no other Bluetooth devices are active within ten meters. If pairing fails, check for nearby Bluetooth devices.

Basic Operation

1. Connect the power cable to the USB adaptor.
2. Remove the protective paper from the CD Player before powering on to prevent laser damage.
3. Insert a CD into the CD Player.
4. Press the ON/OFF button to power on; playback will begin in 5-12 seconds.
5. Press the "MODE" button to cycle through modes: "CD", "USB", "Bluetooth", "FM", and "AUX".

Power On/Off Instructions

1. Power On: Press the ON/OFF button. The CD Player will automatically play the CD if one is inserted.
2. Power Off: Press the ON/OFF button again. Do not touch the Compact Disk before turning off the device.

CD Mode Instructions

Press the CD button on the remote or use the "Mode" key on the device to switch to CD mode. The Compact Disk will play automatically, and the indicator light color will change to blue, displaying a CD icon on the screen.

Bluetooth Mode Instructions

1. Switch to Bluetooth mode using the remote's Bluetooth button or the device's "Mode" key. The indicator light will turn dark blue, and a Bluetooth icon will appear on the screen, ready for pairing.
2. Activate Bluetooth on your mobile phone and search for nearby Bluetooth devices.
3. Select "CD PLAYER" from your mobile phone's Bluetooth device list to pair.
4. Pairing typically takes a few seconds.
5. Play music from your mobile phone; the audio will be transmitted to the CD Player's speakers via Bluetooth.

FM Mode Instructions

1. Switch to FM mode using the remote's FM/CH button or the device's "Mode" key.
2. Use the <Prev> or <Next> buttons to change stations, or enter digital numbers to tune to pre-stored stations.
3. Press the FM/CH button again to scan for all available radio stations. The first 40 stations found will be stored automatically. Playback begins with the first station after scanning.

USB Mode Instructions

1. Plug a USB drive into the CD Player's USB port.
2. Switch to USB mode using the remote's USB button or the device's "Mode" key.
3. The CD Player will read and play music from the USB drive. The indicator light will turn grass green, and a "USB" icon will appear on the screen.

Repeat Function

Press the repeat button on the remote to cycle through playback modes: "Repeat One", "Repeat ALL", or "Shuffle play". The screen will display "ONE", "ALL", "SFL", or "OFF".

A-B Repeat Function

This function allows repeated playback of a specific section. Set the start point (A) and end point (B) by pressing the A-B button during playback. The screen will show "A" and then "B". The section between A and B will play repeatedly. Press the A-B button again to exit A-B repeat, showing "OFF" on the screen. This function is available for CD and USB modes only.

AUX Mode

1. Connect the CD Player to other audio devices using the included 3.5mm male-to-male audio cable.
2. Switch to AUX IN mode using the remote's AUX button or the device's "Mode" key. The indicator light will turn green, and the screen will display "LINE". Audio will be transmitted to the CD Player's speakers.

Troubleshooting

1. Cannot be turned on:
   • Reason 1: Switch is not turned on. Solution 1: Check if the pull switch is powered on.
   • Reason 2: The player is damaged. Solution 2: Contact customer support or a professional for repairs.
2. Cannot read discs:
   • Reason 1: The disc is installed incorrectly. Solution 1: Ensure the label side faces up and the disc is fully inserted.
   • Reason 2: The disc cannot be recognized. Solution 2: The player is compatible only with CD format.
   • Reason 3: The disc is dirty or damaged. Solution 3: Ensure the disc is not heavily scratched or damaged. Gently wipe the disc from the center outwards with a clean, soft cloth. Try a different disc to check for disc faults.
   • Reason 4: The laser lens is dirty. Solution 4: Gently wipe the laser lens with a degreasing cotton swab. Note: DO NOT TOUCH THE LASER WITH YOUR HANDS.
3. Remote does not work:
   • Reason 1: The insulation sheet is not removed. Solution 1: Check and remove the insulation sheet from the battery slot.
   • Reason 2: The remote is out of power. Solution 2: Check if the remote battery needs replacement.
   • Reason 3: The remote is too far from the CD player. Solution 3: Ensure the remote is within the effective range (within 6 meters).
4. Noisy and screaming when it plays:
   • Reason 1: The disc may be worn or scratched. Solution 1: Ensure the disc is not heavily scratched or damaged. Gently wipe the disc from the center outwards with a clean, soft cloth. Try a different disc to check for disc faults.
   • Reason 2: A "Jiji" sound might indicate disc scratching. Solution 2: Replace the disc and avoid using the scratched one to prevent player damage.

Sleep Timer Operation

Use the clock key on the remote to set the sleep timer.

A clock icon appears on the display when the sleep timer is activated.

Setting:

• Time set range: 30 - 180 minutes.
• The sleep timer activates with a 30-minute setting upon the first press of the clock key.
• Each subsequent press adds 30 minutes, up to a maximum of 360 minutes. Pressing again turns off the sleep timer.
• Once a time is set, the player counts down and enters standby mode automatically.