Table of Contents
- Cold Cathode Modules
- Vacuum Quality Monitor (VQM) Products
- Combination Gauge Products
- Convectron Heat Loss Sensors
- Micro-Ion Ionization Gauges
- Stabil-Ion Ionization Gauges
- Bayard-Alpert Ionization Gauges
- Valves
Cold Cathode Modules (Series 500)
500 Modules and Gauges
| Description | Price | Catalog Number |
|---|---|---|
| Cold Cathode Modules (CE Marked) | ||
| Select one of the output configurations to create the appropriate catalog number and determine the price. | ||
| Module with RS-485, analog output, 2 setpoints, no display | 500100 - 2 # - R4 # - # | |
| Module with RS-485, analog output, 2 setpoints, digital display | 500101 - 2 # - R4 # - # | |
| Setpoint Relays: Two relays | 2 | |
| Calibration: Standard Accuracy | S | |
| Calibration: Higher Accuracy (Calibrated) | C | |
| Interface: RS-485 | R4 | |
| Vacuum Fitting: NW25KF | E | |
| Vacuum Fitting: NW40KF | K | |
| Vacuum Fitting: NW35CF (2.75 inch ConFlat-type) | G | |
| Measurement units: Torr | T | |
| Measurement units: Mbar | M | |
| Measurement units: Pa | P | |
| Replacement Gauge (Sensor) | 500200 - ## | |
| Calibration: Standard Accuracy | S | |
| Calibration: Higher Accuracy (Calibrated) | C | |
| Vacuum Fitting: NW25KF | E | |
| Vacuum Fitting: NW40KF | K | |
| Vacuum Fitting: NW35CF (2.75 inch ConFlat-type) | G | |
| Maintenance Kit: Kit includes cathode cage, baffle top, baffle bottom, and snap ring. | 500600-K |
Vacuum Quality Monitor (VQM) Products
835 VQM Controllers and Gauges
| Description | Price | Catalog Number |
|---|---|---|
| 835 VQM Mass Spectrometer Gauge Controller | ||
| Controller, Single Gauge, Benchtop Mount, USB 2.0, without Power Supply/Cord | 835500-U # - 0 | |
| Controller, Single Gauge, Benchtop Mount, USB 2.0, with Power Supply/Cord | 835500-U # - # | |
| AMU: 1-145 amu, no setpoints | 1 | |
| AMU: 1-300 amu, no setpoints | 3 | |
| Power Supply: North America 115 Vac/Japan 100 Vac | 1 | |
| Power Supply: North America 240 Vac | 2 | |
| Power Supply: Universal Europe 220 Vac | 3 | |
| Power Supply: United Kingdom 240 Vac | 4 | |
| VQM Controller Upgrade from 1-145 amu to 1-300 amu | N/A | |
| Universal Power Supply/Cord for 835 Controller, AC to 24 Vdc | 801201-# | |
| Select the desired power cord plug type, below. | ||
| North America 115 Vac / Japan 100 Vac | 1 | |
| North America 240 Vac | 2 | |
| Universal Europe 220 Vac | 3 | |
| United Kingdom 240 Vac | 4 | |
| Cables, Controller-to-Gauge: 1 meter (3.28 ft) | 835300-01M | |
| Cables, Controller-to-Gauge: 3 meters (9.84 ft) | 835300-03M | |
| Cables, Controller-to-Gauge: 10 meter (32.8 ft) | 835300-10M | |
| Cables, Controller-to-Gauge: 20 meter (65.6 ft) | 835300-20M | |
| Cables, Controller-to-Gauge: 50 meter (164 ft) | 835300-50M | |
| CD, 835 Software Suite (Viewer Application, LabVIEW VI) | 835400 | |
| 835 VQM Mass Spectrometer Gauge | 835100-YG- # # | |
| Gauge, Channel Electron Multiplier Detector, Yttria-coated Iridium filament, 2.75-inch (NW35CF) Conflat-type flange | ||
| AMU: 1-145 amu (120 resolution) | 1 | |
| AMU: 1-300 amu (180 resolution) | 3 | |
| Nude | N | |
| In Demountable Envelope | D | |
| VQM Total Pressure Measurement Micro-Ion ATM Module | 390802-2-YG-T | |
| Absolute & Ratiometric Pressure, 10⁻⁹ to ATM, RS-485, dual Yttria-coated Iridium ion gauge filaments, gauge filament protection, digital display | ||
| With total pressure, 2.75-inch (NW35CF) ConFlat-type flange, Torr | 390100-YG | |
| Replacement Gauge | ||
| Cables, 835 VQM Controller to Micro-Ion ATM Module: 1 meter (3.28 ft) | 802301-01M | |
| Cables, 835 VQM Controller to Micro-Ion ATM Module: 3 meters (9.84 ft) | 802301-03M |
835 VQM Differential Pumping System (DPS)
| Description | Price | Catalog Number |
|---|---|---|
| 835 VQM Differential Pumping System (DPS) | 835901-DPS-# # # - # | |
| Differential Pumping System: VQM Gauge, Cross Fitting, Turbo Pump, Roughing Pump, Orifice, Total Pressure Gauge, Power Supply & Cord | ||
| Orifice: Size 1 (90 mTorr to 3 Torr) | 1 | |
| Orifice: Size 2 (10 mTorr to .3 Torr) | 2 | |
| Orifice: Size 3 (1 mTorr to 50 mTorr) | 3 | |
| Orifice: Size 4 (.1 mTorr to 5 mTorr) | 4 | |
| Orifice: Size 5 (.02 mTorr to .8 mTorr) | 5 | |
| Valve: Manual Valve | M | |
| Valve: Pneumatic Valve | P | |
| Mass Range: AMU 1-145 | 1 | |
| Mass Range: AMU 1-300 | 3 | |
| Select the desired power cord plug type, below. | ||
| North America 115 Vac / Japan 100 Vac | 1 | |
| North America 240 Vac | 2 | |
| Universal Europe 220 Vac | 3 | |
| United Kingdom 240 Vac | 4 | |
| NOTE: VQM Controller (835500-U#-#), Cables (Controller to Gauge [835300-0#M]; Controller to 390 ATM Module [802301-0#M]) and Software CD (835400) are required and must be ordered separately. See pg 5 for descriptions and prices. | ||
VQM Accessories
| Description | Price | Catalog Number |
|---|---|---|
| 835 VQM Mass Spectrometer | ||
| Cable, for log/linear analog output (1/8" miniature phone jack) from a G-P Ion Gauge Controller to the analog input (BNC) on the 835 VQM Controller, 10 meters (32.8 ft) | 801202-10M | |
| Demountable Envelope (Nipple) for Nude Gauge, 2.75 (NW35CF) Includes port screen | 801270 | |
| T-Flange, NW35CF, 2.75 inch | 801272 | |
| Heater Jacket, 120 Vac, North American 115Vac/Japan 100Vac power cord | 801203-1 | |
| Heater Jacket, 240 Vac, North American 240Vac power cord | 801204-2 | |
| Heater Jacket, 240 Vac, Universal European 220 Vac power cord | 801204-3 | |
| Heater Jacket, 240 Vac, United Kingdom 240 Vac power cord | 801204-4 | |
| 835 VQM Differential Pumping System (DPS) | ||
| 835 VQM Differential Pumping System (DPS) | 801210-K | |
| KF40 Adapter Kit | 801700-#-K | |
| Isolation Valve Kit: Manual Valve | M | |
| Isolation Valve Kit: Pneumatic Valve | P | |
| Orifice for Gate Valve: Size 1 (90 mTorr to 3 Torr) | 1 | |
| Orifice for Gate Valve: Size 2 (10 mTorr to 3 Torr) | 2 | |
| Orifice for Gate Valve: Size 3 (1 mTorr to .3 Torr) | 3 | |
| Orifice for Gate Valve: Size 4 (.1 mTorr to 50 mTorr) | 4 | |
| Orifice for Gate Valve: Size 5 (.02 mTorr to .8 mTorr) | 5 | |
| Orifice, No Gate Valve: Size 1 (90 mTorr to 3 Torr) | 1 | |
| Orifice, No Gate Valve: Size 2 (10 mTorr to 3 Torr) | 2 | |
| Orifice, No Gate Valve: Size 3 (1 mTorr to .3 Torr) | 3 | |
| Orifice, No Gate Valve: Size 4 (.1 mTorr to 50 mTorr) | 4 | |
| Orifice, No Gate Valve: Size 5 (.02 mTorr to .8 mTorr) | 5 | |
| Bolt Kit for Orifice when no Gate Valve is used | 801207-K | |
| 835 VQM Field Replaceable Filament Assembly Kit For use with Series 830 & 835 Gauges | 830105-Y-K | |
| Field Replaceable Electron Multiplier Kit For use with Series 835 Gauges only | 835110-K | |
| Hardware/Bolt Kit, includes 6 flange bolts and washers, 3 plate nuts, and 1 copper gasket | 801274-1 | |
| Wrench, 1/4" 12 pt. | 801275 |
Combination Gauge Products
392 Micro-Ion Plus Modules and Replacement Gauges
| Description | Price | Catalog Number |
|---|---|---|
| Micro-Ion Plus Modules (CE Marked) Select one of the output configurations and vacuum fitting to create the appropriate catalog number and determine the price (see the example below). | ||
| Analog output, no display (no setpoints in the analog version) | 392401 - 0 - Y # - # | |
| Analog output, with digital display (no setpoints in the analog version) | 392402 - 0 - Y # - # | |
| RS-485 interface, no display | 392501 - # - Y # - # | |
| RS-485 interface, with digital display | 392502 - # - Y # - # | |
| DeviceNet™ interface, no display | 392601 - # - Y # - # | |
| DeviceNet interface, with digital display | 392602 - # - Y # - # | |
| Setpoints: None | 0 | |
| Setpoints: Two | 2 | |
| Setpoints: Three | 3 | |
| Ion Gauge Filaments: Yttria-coated iridium | Y | |
| Vacuum Fitting: NW16KF | D | |
| Vacuum Fitting: NW25KF | E | |
| Vacuum Fitting: NW40KF | K | |
| Vacuum Fitting: 1/2 inch VCR-type male | H | |
| Vacuum Fitting: 1.33-inch (NW16CF) ConFlat®-type | F | |
| Vacuum Fitting: 2.75-inch (NW35CF) ConFlat-type | G | |
| Measurement units: Torr | T | |
| Measurement units: Mbar | M | |
| Measurement units: Pa | P | |
| Example: To order a Micro-Ion Plus Module with RS-485 output, no display, two setpoints, Tungsten filaments, NW25KF vacuum fitting, and units in Torr, select catalog number 392501-2-TE-T | ||
| Replacement Gauges for Micro-Ion Plus Modules | 392100 - Y # | |
| Replacement Gauge: Ion Gauge Filaments: Yttria-coated Iridium | Y | |
| Vacuum Fitting: NW16KF | D | |
| Vacuum Fitting: NW25KF | E | |
| Vacuum Fitting: NW40KF | K | |
| Vacuum Fitting: 1/2 inch VCR-type male | H | |
| Vacuum Fitting: 1.33-inch (NW16CF) ConFlat-type | F | |
| Vacuum Fitting: 2.75-inch (NW35CF) ConFlat-type | G | |
390 Micro-Ion ATM Modules and Replacement Gauges
| Description | Price | Catalog Number |
|---|---|---|
| Micro-Ion ATM Modules (CE Marked) Select one of the output configurations and vacuum fitting to create the appropriate catalog number and determine the price (see the example below). | ||
| Analog output, no display (no setpoints in the analog version) | 390410 - 0 - Y # - # | |
| Analog output, with digital display (no setpoints in the analog version) | 390411 - 0 - Y # - # | |
| RS-485 interface, no display | 390510 - # - Y # - # | |
| RS-485 interface, with digital display | 390511 - # - Y # - # | |
| DeviceNet™ interface, no display | 390610 - # - Y # - # | |
| DeviceNet interface, with digital display | 390611 - # - Y # - # | |
| Setpoints: None | 0 | |
| Setpoints: Two | 2 | |
| Setpoints: Three | 3 | |
| Ion Gauge Filaments: Yttria-coated Iridium | Y | |
| Vacuum Fitting: NW16KF | D | |
| Vacuum Fitting: NW25KF | E | |
| Vacuum Fitting: NW40KF | K | |
| Vacuum Fitting: 1/2 inch VCR-type male | H | |
| Vacuum Fitting: 1.33-inch (NW16CF) ConFlat®-type | F | |
| Vacuum Fitting: 2.75-inch (NW35CF) ConFlat-type | G | |
| Measurement units: Torr | T | |
| Measurement units: Mbar | M | |
| Measurement units: Pa | P | |
| Example: To order a Micro-Ion ATM Module with RS-485 output, no display, two setpoints, Tungsten filaments, NW25KF vacuum fitting, and units in Torr, select catalog number 390510-2-TE-T | ||
| Analog/RS-485 Power Supply | 390200-1 | |
| Replacement Gauges for Micro-Ion ATM Modules | 390100 - Y # | |
| Replacement Gauge: Ion Gauge Filaments: Yttria-coated Iridium | Y | |
| Vacuum Fitting: NW16KF | D | |
| Vacuum Fitting: NW25KF | E | |
| Vacuum Fitting: NW40KF | K | |
| Vacuum Fitting: 1/2 inch VCR-type male | H | |
| Vacuum Fitting: 1.33-inch (NW16CF) ConFlat-type | F | |
| Vacuum Fitting: 2.75-inch (NW35CF) ConFlat-type | G | |
385 Convectron ATM Modules and Replacement Gauges
| Description | Price | Catalog Number |
|---|---|---|
| Convectron ATM Modules (CE Marked) Select one of the output configurations and vacuum fitting to create the appropriate catalog number and determine the price (see the example below). | ||
| Analog output, no display | 385001 - G # | |
| RS-485 interface, no display | 385002 - G # - # | |
| RS-485 interface, with digital display | 385003 - G # - # | |
| DeviceNet interface, no display | 385009 - G # - # | |
| DeviceNet interface, with digital display | 385007 - G # - # | |
| DeviceNet interface, no display | 385010 - G # - # * | |
| DeviceNet interface, with digital display | 385011 - G # - # * | |
| *Originally preconfigured for Brooks only; available for direct customer sales since 4/23/10. | ||
| Vacuum Fitting: 1/8 NPT, 1/2 inch tubulation | P | |
| Vacuum Fitting: 1/4 inch VCR-type female | Q | |
| Vacuum Fitting: 1/2 inch VCR-type female | R | |
| Vacuum Fitting: NW16KF | D | |
| Vacuum Fitting: NW25KF | E | |
| Vacuum Fitting: NW40KF | K | |
| Vacuum Fitting: 1.33-inch (NW16CF) ConFlat®-type | F | |
| Vacuum Fitting: 2.75-inch (NW35CF) ConFlat-type | G | |
| Measurement units: Torr | T | |
| Measurement units: Mbar | M | |
| Measurement units: Pa | P | |
| Example: To order a Convectron ATM Module with RS-485 output, no display, NW16KF vacuum fitting, and units in Torr, select catalog number 385002-GD-T | ||
| Analog/RS-485 Power Supply | 390200-1 | |
| Replacement Gauges for Convectron ATM Modules | 385200 - G # | |
| Vacuum Fitting: 1/8 NPT, 1/2 inch tubulation | P | |
| Vacuum Fitting: 1/4 inch VCR-type female | Q | |
| Vacuum Fitting: 1/2 inch VCR-type female | R | |
| Vacuum Fitting: NW16KF | D | |
| Vacuum Fitting: NW25KF | E | |
| Vacuum Fitting: NW40KF | K | |
| Vacuum Fitting: 1.33-inch (NW16CF) ConFlat-type | F | |
| Vacuum Fitting: 2.75-inch (NW35CF) ConFlat-type | G | |
356 Micro-Ion Plus Modules and Replacement Gauges
| Description | Price | Catalog Number |
|---|---|---|
| Micro-Ion Plus Modules (CE Marked) Choose one of the basic modules with yttria-coated iridium filaments and add the options below to create your catalog number and determine the price (see the example below). Power supply and cable are not included. | ||
| RS-485 interface, analog output, no display | 356001 - Y # - # | |
| RS-485 interface, analog output, digital display | 356002 - Y # - # | |
| DeviceNet™ interface, no display | 356004 - Y # - # | |
| DeviceNet interface, digital display | 356005 - Y # - # | |
| Vacuum Connection: NW16KF | D | |
| Vacuum Connection: NW25KF | E | |
| Vacuum Connection: NW40KF | K | |
| Vacuum Connection: 1.33 inch (NW16CF) ConFlat-type | F | |
| Vacuum Connection: 2.75 inch (NW35CF) ConFlat-type | G | |
| Vacuum Connection: 1/2 inch VCR-type male | H | |
| Vacuum Connection: NW16KF Extended (4.2" long) | M | |
| Vacuum Connection: NW25KF Extended (4.2" long) | N | |
| Vacuum Connection: NW40KF Extended (4.6" long) | L | |
| Measurement units: Torr | T | |
| Measurement units: mbar | M | |
| Measurement units: Pa | P | |
| Example: To order a Micro-Ion Plus Module with RS-485, analog output, digital display, NW25KF fitting, and display in Torr, select catalog number 356002-YE-T. | ||
| Replacement gauges for Micro-Ion Plus Modules | 356006 - Y # | |
| Vacuum Connection: NW16KF | D | |
| Vacuum Connection: NW25KF | E | |
| Vacuum Connection: NW40KF | K | |
| Vacuum Connection: 1.33 inch (NW16CF) ConFlat-type | F | |
| Vacuum Connection: 2.75 inch (NW35CF) ConFlat-type | G | |
| Vacuum Connection: 1/2 inch VCR-type male | H | |
| Vacuum Connection: NW16KF Extended (4.2" long) | M | |
| Vacuum Connection: NW25KF Extended (4.2" long) | N | |
| Vacuum Connection: NW40KF Extended (4.6" long) | L | |
| Optional Power Supply for Analog/RS-485 North America 115V | 356021-1 | |
| Accessory Power Supply for DeviceNet Version Only (CE Compliant) | ||
| DeviceNet Power Supply: North American 115 Vac / Japan 100 Vac | 1 | |
| DeviceNet Power Supply: North American 240 Vac | 2 | |
| DeviceNet Power Supply: Universal Europe 220 Vac | 3 | |
| DeviceNet Power Supply: United Kingdom 240 Vac | 4 | |
Convectron Heat Loss Sensors
275 Mini-Convectron Modules with Analog Output (including RoHS)
| Description | Price | Catalog Number |
|---|---|---|
| Mini-Convectron Modules, nonlinear analog output with complete electrical mating connector (CE Marked) Operating Power: 11.5 Vdc to 26.5 Vdc (power supply and cable are not included) | ||
| 1 process control setpoint relay | ||
| 1/8 NPT / 1/2 inch tubulation | 275800-EU | |
| 1/4 inch VCR®-type female fitting | 275801-EU | |
| 1/2 inch VCR-type female fitting | 275863-EU | |
| 3/8 inch VCO®-type male fitting | 275802-EU | |
| 1.33 inch (NW16CF) ConFlat®-type flange | 275803-EU | |
| 2.75 inch (NW35CF) ConFlat-type flange | 275804-EU | |
| NW16KF flange | 275806-EU | |
| NW25KF flange | 275807-EU | |
| NW40KF flange | 275808-EU | |
| 2 process control setpoint relays | ||
| 1/8 NPT / 1/2 inch tubulation | 275870-EU | |
| 1/4 inch VCR-type female fitting | 275871-EU | |
| 1/2 inch VCR-type female fitting | 275867-EU | |
| 3/8 inch VCO-type male fitting | 275872-EU | |
| 1.33 inch (NW16CF) ConFlat-type flange | 275873-EU | |
| 2.75 inch (NW35CF) ConFlat-type flange | 275874-EU | |
| NW16KF flange | 275876-EU | |
| NW25KF flange | 275877-EU | |
| NW40KF flange | 275878-EU | |
| Mini-Convectron Modules with complete electrical mating connector (CE Marked) 0 to 1 Torr linear analog output (0 - 10 Vdc) and nonlinear analog output (1 mTorr to 1000 Torr), No process control setpoint relays Operating power: 13 Vdc to 26.5 Vdc (power supply and cable are not included) | ||
| Standard: 1/8 NPT / 1/2 inch tubulation | 275850-EU | |
| Standard: 1/4 inch VCR®-type female fitting | 275851-EU | |
| Standard: 1/2 inch VCR-type female fitting | 275862-EU | |
| Standard: 3/8 inch VCO®-type male fitting | 275852-EU | |
| Standard: 1.33 inch (NW16CF) ConFlat®-type flange | 275853-EU | |
| Standard: 2.75 inch (NW35CF) ConFlat-type flange | 275854-EU | |
| Standard: NW16KF flange | 275856-EU | |
| Standard: NW25KF flange | 275857-EU | |
| Standard: NW40KF flange | 275858-EU | |
| RoHS: 1/8 NPT / 1/2 inch tubulation | 275330-GP | |
| RoHS: 1/4 inch VCR®-type female fitting | 275330-GQ | |
| RoHS: 1/2 inch VCR-type female fitting | 275330-GR | |
| RoHS: 3/8 inch VCO®-type male fitting | 275330-GH | |
| RoHS: 1.33 inch (NW16CF) ConFlat-type flange | 275330-GF | |
| RoHS: 2.75 inch (NW35CF) ConFlat-type flange | 275330-GG | |
| RoHS: NW16KF flange | 275330-GD | |
| RoHS: NW25KF flange | 275330-GE | |
| RoHS: NW40KF flange | 275330-GK | |
| Replacement Convectron® Gauges for Mini-Convectron Modules are listed on page 16. See page 4 for an illustration of commonly used vacuum fittings and flanges. See page 15 for information on NIST calibration service for Mini-Convectron Modules. | ||
275 Mini-Convectron Modules with RS-485 Interface
| Description | Price | Catalog Number |
|---|---|---|
| Mini-Convectron Modules with RS-485 interface, 2 process control setpoint relays, complete with electrical mating connector (CE Marked) Operating Power: 11 Vdc to 26.5 Vdc (power supply and cable are not included) | ||
| Devices preset to Torr Units w/gold-plated tungsten sensor: 1/8 NPT / 1/2 inch tubulation | 275527-EU | |
| Devices preset to Torr Units w/gold-plated tungsten sensor: 1/4 inch VCR-type female fitting | 275528-EU | |
| Devices preset to Torr Units w/gold-plated tungsten sensor: 1/2 inch VCR-type female fitting | 275529-EU | |
| Devices preset to Torr Units w/gold-plated tungsten sensor: 3/8 inch VCO-type male fitting | 275530-EU | |
| Devices preset to Torr Units w/gold-plated tungsten sensor: 1.33 inch (NW16CF) ConFlat-type flange | 275531-EU | |
| Devices preset to Torr Units w/gold-plated tungsten sensor: 2.75 inch (NW35CF) ConFlat-type flange | 275532-EU | |
| Devices preset to Torr Units w/gold-plated tungsten sensor: NW16KF flange | 275546-EU | |
| Devices preset to Torr Units w/gold-plated tungsten sensor: NW25KF flange | 275534-EU | |
| Devices preset to Torr Units w/gold-plated tungsten sensor: NW40KF flange | 275535-EU | |
| Devices preset to Pascal or Mbar Units: Mini-Convectron Module w/gold-plated tungsten sensor | 275546 - G # - # | |
| Devices preset to Pascal or Mbar Units: Mini-Convectron Module w/platinum sensor | 275546 - P # - # | |
| Flange/Fitting: 1/8 NPT / 1/2 inch tubulation | P | |
| Flange/Fitting: 1/4 inch VCR-type female | Q | |
| Flange/Fitting: 1/2 inch VCR-type female | R | |
| Flange/Fitting: NW16KF | D | |
| Flange/Fitting: NW25KF | E | |
| Flange/Fitting: NW40KF | K | |
| Flange/Fitting: 1.33 inch (NW16CF) ConFlat-type | F | |
| Flange/Fitting: 2.75 inch (NW35CF) ConFlat-type | G | |
| Measurement unit: mbar | M | |
| Measurement unit: Pa | P | |
| Measurement unit: Torr * | T | |
| *Torr available for 275546 platinum part numbers only; RS-485 for gold-plated tungsten preset Torr shown above. | ||
| Replacement Convectron® Gauges for Mini-Convectron Modules are listed on page 16. See page 4 for an illustration of commonly used vacuum fittings and flanges. See page 15 for information on NIST calibration service for Mini-Convectron Modules. | ||
275 Mini-Convectron Modules with 3-Digit Display
| Description | Price | Catalog Number |
|---|---|---|
| Mini-Convectron Modules with 3-digit display, 2 process control setpoint relays, nonlinear analog output with complete electrical mating connector (CE Marked) Operating Power: 11.5 Vdc to 26.5 Vdc (power supply and cable are not included) | ||
| Display in Torr: 1/8 NPT / 1/2 inch tubulation | 275904-EU | |
| Display in Torr: 1/4 inch VCR®-type female fitting | 275905-EU | |
| Display in Torr: 1/2 inch VCR-type female fitting | 275906-EU | |
| Display in Torr: 3/8 inch VCO®-type male fitting | 275907-EU | |
| Display in Torr: 1.33 inch (NW16CF) ConFlat®-type flange | 275908-EU | |
| Display in Torr: 2.75 inch (NW35CF) ConFlat-type flange | 275909-EU | |
| Display in Torr: NW16KF flange | 275911-EU | |
| Display in Torr: NW25KF flange | 275912-EU | |
| Display in Torr: NW40KF flange | 275913-EU | |
| Display in Pascal: 1/8 NPT / 1/2 inch tubulation | 275904-EU-P | |
| Display in Pascal: 1/4 inch VCR-type female fitting | 275905-EU-P | |
| Display in Pascal: 1/2 inch VCR-type female fitting | 275906-EU-P | |
| Display in Pascal: 3/8 inch VCO-type male fitting | 275907-EU-P | |
| Display in Pascal: 1.33 inch (NW16CF) ConFlat-type flange | 275908-EU-P | |
| Display in Pascal: 2.75 inch (NW35CF) ConFlat-type flange | 275909-EU-P | |
| Display in Pascal: NW16KF flange | 275911-EU-P | |
| Display in Pascal: NW25KF flange | 275912-EU-P | |
| Display in Pascal: NW40KF flange | 275913-EU-P | |
| Wall transformer power supply: Wall transformer to convert 120 Vac to 12 Vdc, with 6 foot (1.8 meter) long cable and 15-pin connector for use with Mini-Convectrons with digital display. (UL Listed – not CE-Marked) | 275933 | |
| NIST (National Institutes of Standards and Technology) traceable calibration for Series 275 Mini-Convectron Modules and 475 Convectron Controller systems. Includes the following data points: 1 mTorr, 100 mTorr, 1 Torr, 300 Torr, and 760 Torr. Available for new purchase and annual recertification. | ||
| Replacement Convectron® Gauges for Mini-Convectron Modules are listed on page 16. See page 4 for an illustration of commonly used vacuum fittings and flanges. | ||
275 Mini-Convectron Modules with DeviceNet™ Interface
| Description | Price | Catalog Number |
|---|---|---|
| Mini-Convectron Modules with DeviceNet™ Interface and 2 process control setpoint relays (CE Marked) Operating Power: 11 to 26 Vdc (power supply and cable are not included) Choose a Mini-Convectron Module and add the options below to create your catalog number and determine the price (see the example below). | ||
| With gold-plated Tungsten sensor and No Display | 275553 - G # - # | |
| With gold-plated Tungsten sensor and 3-Digit Digital Display | 275538 - G # - # | |
| Flange/Fitting: 1/8 inch NPT / 1/2 inch tubulation | P | |
| Flange/Fitting: 1/4 inch VCR®-type female | Q | |
| Flange/Fitting: 1/2 inch VCR-type female | R | |
| Flange/Fitting: NW16KF | D | |
| Flange/Fitting: NW25KF | E | |
| Flange/Fitting: NW40KF | K | |
| Flange/Fitting: 1.33 inch (NW16CF) ConFlat-type | F | |
| Flange/Fitting: 2.75 inch (NW35CF) ConFlat-type | G | |
| Measurement unit: Torr | T | |
| Measurement unit: mbar | M | |
| Measurement unit: Pa | P | |
| Example: To order a Mini-Convectron DeviceNet Module with 3-digit display, NW16KF fitting, and display in Torr, select catalog number 275538-GD-T | ||
| Replacement Gauges for Mini-Convectron Modules, Gold-plated Tungsten Sensor (RoHS) | ||
| 1/8 NPT / 1/2 inch tubulation | 275810 | |
| 1/4 inch VCR-type female fitting | 275811 | |
| 1/2 inch VCR-type female fitting | 275864 | |
| 3/8 inch VCO-type male fitting | 275812 | |
| 1.33 inch (NW16CF) ConFlat-type flange | 275813 | |
| 2.75 inch (NW35CF) ConFlat-type flange | 275814 | |
| NW16KF flange | 275816 | |
| NW25KF flange | 275817 | |
| NW40KF flange | 275818 | |
| Replacement Gauges for Mini-Convectron Modules, Platinum Sensor | 275572 - P # | |
| Flange/Fitting: 1/8 NPT / 1/2 inch tubulation | P | |
| Flange/Fitting: 1/4 inch VCR-type female | Q | |
| Flange/Fitting: 1/2 inch VCR-type female | R | |
| Flange/Fitting: NW16KF | D | |
| Flange/Fitting: NW25KF | E | |
| Flange/Fitting: NW40KF | K | |
| Flange/Fitting: 1.33 inch (NW16CF) ConFlat-type flange | F | |
| Flange/Fitting: 2.75 inch (NW35CF) ConFlat-type flange | G | |
| Flange/Fitting: 15mm OD Tubulation | B | |
| See page 4 for an illustration of commonly used vacuum fittings and flanges. See page 15 for information on NIST calibration service for Mini-Convectron Modules. | ||
275 Convectron Gauges
| Description | Price | Catalog Number |
|---|---|---|
| Convectron Gauges For use with Series 316, 375, & 475 Convectron Gauge Controllers and Series 307, 358 & 370 Ionization Gauge Controllers. | ||
| Gold-plated Tungsten Filament: 1/8 NPT / 1/2 inch tubulation | 275071 | |
| Gold-plated Tungsten Filament: 1/4 inch VCR®-type female fittings | 275185 | |
| Gold-plated Tungsten Filament: 1/2 inch VCR-type female fittings | 275282 | |
| Gold-plated Tungsten Filament: 3/8 inch VCO®-type male fitting | 275233 | |
| Gold-plated Tungsten Filament: 1.33 inch (NW16CF) rotatable ConFlat®-type flange | 275256 | |
| Gold-plated Tungsten Filament: 2.75 inch (NW35CF) rotatable ConFlat-type flange | 275238 | |
| Gold-plated Tungsten Filament: NW16KF flange (welded) | 275203 | |
| Gold-plated Tungsten Filament: NW25KF flange (welded) | 275196 | |
| Gold-plated Tungsten Filament: NW40KF flange (welded) | 275316 | |
| Platinum Filament: Flange/Fitting: 1/8 NPT / 1/2 inch tubulation | 275320 - P # | |
| Platinum Filament: Flange/Fitting: 1/4 inch VCR-type female | P | |
| Platinum Filament: Flange/Fitting: 1/2 inch VCR-type female | Q | |
| Platinum Filament: Flange/Fitting: NW16KF | R | |
| Platinum Filament: Flange/Fitting: NW25KF | D | |
| Platinum Filament: Flange/Fitting: NW40KF | E | |
| Platinum Filament: Flange/Fitting: 1.33 inch (NW16CF) ConFlat-type flange | K | |
| Platinum Filament: Flange/Fitting: 2.75 inch (NW35CF) ConFlat-type flange | F | |
| Platinum Filament: Flange/Fitting: 15mm OD Tubulation | G | |
| Platinum Filament: Flange/Fitting: B | B | |
| See page 4 for an illustration of commonly used vacuum fittings and flanges. | ||
| Accessories: Zero pressure simulator Used to set zero vacuum point on all Convectron Controllers. | 275243 | |
| Accessories: Variable pressure simulator Used to calibrate all Convectron Controllers throughout the pressure range. | 275244 | |
475 RoHS Convectron Gauge Controllers
| Description | Price | Catalog Number |
|---|---|---|
| Controller for a Convectron Gauge (CE Marked and RoHS) Operating Power 12 to 24 Vdc (power supply and cable are not included – see Power Supplies, below) Choose one of the basic controllers and add the options below to create your catalog number and determine the price. See the example below. Convectron Gauges are listed on page 17. | ||
| 1/8 DIN, panel mount with Graphics Display | 475001 - # # - # | |
| Interface options (Slot X): None | 0 | |
| Interface options (Slot X): RS-232 | A | |
| Interface options (Slot X): RS-485 | B | |
| Setpoint option (Slot Y): None | 0 | |
| Setpoint option (Slot Y): 2 setpoint relays | 2 | |
| Measurement units: Torr | T | |
| Measurement units: mbar | M | |
| Measurement units: Pa | P | |
| Example: To order a Series 475 controller with RS232 interface, two setpoint relays and display in Torr, select catalog number 475001-A2-T | ||
| Power Supplies: CE Compliant, Universal power supply Select the desired power cord plug type, below. | 475008 - # | |
| North America 115 Vac / Japan 100 Vac | 1 | |
| North America 240 Vac | 2 | |
| Universal Europe 220 Vac | 3 | |
| United Kingdom 240 Vac | 4 | |
| See page 4 at the front of this price list for illustrations of the power cord connectors. Example: To order a power supply and power cord for Universal Europe 220 Vac, select catalog number 475008-3 = $85.00 | ||
| Convectron Gauge Cables: 10 feet (3 meters) | 475012-10 | |
| Convectron Gauge Cables: 25 feet (7.6 meters) | 475012-25 | |
| Convectron Gauge Cables: 50 feet (15.2 meters) | 475012-50 | |
| Convectron Gauge Cables: 100 feet (30.5 meters) | 475012-100 | |
| Convectron Gauge Cables: 200 feet (61 meters) | 475012-200 | |
| Convectron Gauge Cables: 500 feet (152.4 meters) | 475012-500 | |
| NIST (National Institutes of Standards and Technology) traceable calibration for Series 275 Mini-Convectron Modules and 475 Convectron Controller systems. Includes the following data points: 1 mTorr, 100 mTorr, 1 Torr, 300 Torr, and 760 Torr. Available for new purchase and annual recertification. | ||
316 Vacuum Gauge Controllers
| Description | Price | Catalog Number |
|---|---|---|
| Controller with 3-line display Choose one of the basic controllers and add the options below to create your catalog number and determine the price. See the example below. Convectron Gauges are listed on page 17; Thermocouple gauge is listed below. | ||
| Configured for Convectron Gauge on Channel A: Half-rack mount | 316501 - # # # - # # | |
| Configured for Convectron Gauge on Channel A: Left mount for 19-inch rack | 316502 - # # # - # # | |
| Configured for Convectron Gauge on Channel A: Center mount for 19-inch rack | 316503 - # # # - # # | |
| Configured for Thermocouple Gauge on Channel A: Half-rack mount | 316505 - # # # - # # | |
| Configured for Thermocouple Gauge on Channel A: Left mount for 19-inch rack | 316506 - # # # - # # | |
| Configured for Thermocouple Gauge on Channel A: Center mount for 19-inch rack | 316507 - # # # - # # | |
| Interface Options (Slot X): None | 0 | |
| Interface Options (Slot X): RS-232 | A | |
| Interface Options (Slot X): RS-485 | B | |
| Interface Options (Slot X): IEEE-488 | C | |
| Gauge Options (Slot Y): None | 0 | |
| Gauge Options (Slot Y): Dual Convectron | 1 | |
| Gauge Options (Slot Y): Convectron / Capacitance Diaphragm | 2 | |
| Gauge Options (Slot Y): Dual Thermocouple | 3 | |
| Setpoint Options (Slot Z): None | 0 | |
| Setpoint Options (Slot Z): 2 setpoint relays for channel A | A | |
| Setpoint Options (Slot Z): 6 setpoint relays, 2 per channel | B | |
| Display Options - Measurement units: Torr | T | |
| Display Options - Measurement units: mbar | M | |
| Display Options - Measurement units: Pa | P | |
| Power Cord Options: North America 115V / Japan 100 Vac | 1 | |
| Power Cord Options: North America 240 V | 2 | |
| Power Cord Options: Universal Europe 220 V | 3 | |
| Power Cord Options: United Kingdom 240 V | 4 | |
| Example: To order a Series 316 Vacuum Gauge Controller with pressure readout for Convectron Gauges, half-rack mount, RS-232 interface, dual Convectron Gauge operation, 2 setpoint relays, display in Torr, and North America 115 V power cord, select catalog number: 316501-A1A-T1 | ||
| Thermocouple Gauge: DV6-R, with metal alignment key (the metal thermocouple body is brazeable Monel) | 270006 | |
| Description | Price | Catalog Number |
|---|---|---|
| Option Cards (for field installation): RS-232 computer interface | 316021 | |
| Option Cards (for field installation): RS-485 computer interface | 316066 | |
| Option Cards (for field installation): IEEE-488 computer interface | 316022 | |
| Option Cards (for field installation): Dual Convectron Gauge, channels B and C | 316016 | |
| Option Cards (for field installation): Convectron Gauge/capacitance diaphragm, channels B and C | 316026 | |
| Option Cards (for field installation): Dual thermocouple gauge, channels B and C | 316018 | |
| Option Cards (for field installation): Process control with 2 setpoint relays for channel A | 316019 | |
| Option Cards (for field installation): Process control with 6 setpoint relays, 2 per channel | 316020 | |
| Optional Installation Rack-Mount Hardware (for field installation): Control unit on the left or right side for 19-inch rack | 307010 | |
| Optional Installation Rack-Mount Hardware (for field installation): Control unit in the center for 19-inch rack | 307011 | |
| Optional Installation Rack-Mount Hardware (for field installation): 2 control units side-by-side for 19-inch rack | 307021 | |
| Cables for: Single Convectron Gauge: 10 feet (3 meters) | 316007 | |
| Cables for: Single Convectron Gauge: 25 feet (7.6 meters) | 316008 | |
| Cables for: Single Convectron Gauge: 50 feet (15.2 meters) | 316009 | |
| Cables for: Dual Convectron Gauges: 10 feet (3 meters) | 303040-10 | |
| Cables for: Dual Convectron Gauges: 25 feet (7.6 meters) | 303040-25 | |
| Cables for: Dual Convectron Gauges: 50 feet (15.2 meters) | 303040-50 | |
| Cables for: Dual Convectron Gauges: 100 feet (30.5 meters) | 303040-100 | |
| Cables for: Dual Convectron Gauges: 200 feet (61 meters) | 303040-200 | |
| Cables for: Single thermocouple gauge: 10 feet (3 meters) | 316011 | |
| Cables for: Single thermocouple gauge: 25 feet (7.6 meters) | 316012 | |
| Cables for: Single thermocouple gauge: 50 feet (15.2 meters) | 316013 | |
| Cables for: Dual thermocouple gauges: 10 feet (3 meters) | 307054 | |
| Cables for: Dual thermocouple gauges: 25 feet (7.6 meters) | 307055 | |
| Cables for: Dual thermocouple gauges: 50 feet (15.2 meters) | 307056 | |
| Cables for: Convectron Gauge / capacitance diaphragm gauge: 10 feet (3 meters) | 307027 | |
| Cables for: Convectron Gauge / capacitance diaphragm gauge: 25 feet (7.6 meters) | 307028 | |
| Cables for: Convectron Gauge / capacitance diaphragm gauge: 50 feet (15.2 meters) | 307029 | |
| Cables for: IEEE-488: 3.3 feet (1 meter) | 303042 | |
| Cables for: IEEE-488: 6.6 feet (2 meters) | 303043 | |
| Cables for: IEEE-488: 13.2 feet (4 meters) | 303044 |
354 Micro-Ion Modules
| Description | Price | Catalog Number |
|---|---|---|
| Micro-Ion Modules (CE Marked) Choose one of the basic modules and add the options below to create your catalog number and determine the price. See the example below. Power supply and cable are not included. | ||
| Analog output, no setpoint relays: No digital display | 354001 - # # - # | |
| Analog output, no setpoint relays: 3-digit display | 354002 - # # - # | |
| RS-485 interface, 1 setpoint relay: No digital display (Torr only) | 354005 - # # - T | |
| DeviceNet™ interface, 2 setpoint relays: No digital display | 354009 - # # - # | |
| DeviceNet™ interface, 2 setpoint relays: 3-digit display | 354006 - # # - # | |
| Filaments: dual yttria-coated iridium | Y | |
| Filaments: dual tungsten | T | |
| Flange/Fitting: NW16KF | D | |
| Flange/Fitting: NW25KF | E | |
| Flange/Fitting: NW40KF | K | |
| Flange/Fitting: 1.33 inch (NW16CF) ConFlat®-type | F | |
| Flange/Fitting: 2.75 inch (NW35CF) ConFlat-type | G | |
| Flange/Fitting: 1/2 inch VCR®-type male | H | |
| Flange/Fitting: NW16KFL | M | |
| Flange/Fitting: NW25KFL | N | |
| Flange/Fitting: NW40KFL | L | |
| Measurement units: Torr | T | |
| Measurement units: mbar | M | |
| Measurement units: Pa | P | |
| Example: To order a Micro-Ion DeviceNet Module with 3-digit display, dual yttria-coated iridium filaments, NW25KF fitting, and display in Torr, select catalog number 354006-YE-T | ||
| Accessories: Baffle, Field Install | 354038 | |
354 Micro-Ion Module Replacement Gauges
| Description | Price | Catalog Number |
|---|---|---|
| Replacement gauges for Micro-Ion Modules Choose the options below to create your catalog number. | 354003 - # # | |
| Replacement Gauge: Filament: dual Yttria-coated Iridium | Y | |
| Replacement Gauge: Filament: dual tungsten | T | |
| Flange/Fitting: NW16KF | D | |
| Flange/Fitting: NW25KF | E | |
| Flange/Fitting: NW40KF | K | |
| Flange/Fitting: 1.33 inch (NW16CF) ConFlat-type | F | |
| Flange/Fitting: 2.75 inch (NW35CF) ConFlat-type | G | |
| Flange/Fitting: 1/2 inch VCR-type male | H | |
| Flange/Fitting: NW16KFL | M | |
| Flange/Fitting: NW25KFL | N | |
| Flange/Fitting: NW40KFL | L | |
| Accessory Power Supply for DeviceNet Version Only (CE Compliant) | ||
| DeviceNet Power Supply: North American 115V / Japan 100 Vac | 347039 - # 1 | |
| DeviceNet Power Supply: North American 240V | 2 | |
| DeviceNet Power Supply: Universal Europe 220V | 3 | |
| DeviceNet Power Supply: United Kingdom 240V | 4 |
355 Micro-Ion Vacuum Gauges
| Description | Price | Catalog Number |
|---|---|---|
| Micro-Ion Gauges (Not for use with Series 354 Micro-Ion Modules.) Choose the options below to create your catalog number. | 355001 - # # | |
| Gauges: Filament: dual Yttria-coated Iridium | Y | |
| Gauges: Filament: dual tungsten | T | |
| Flange/Fitting: 3/4 inch port | A | |
| Flange/Fitting: 15 mm port | B | |
| Flange/Fitting: 18 mm port | C | |
| Flange/Fitting: 1 inch port | J | |
| Flange/Fitting: NW16KF flange | D | |
| Flange/Fitting: NW25KF flange | E | |
| Flange/Fitting: NW 40KF flange | K | |
| Flange/Fitting: 1.33 inch (NW16CF) ConFlat-type flange | F | |
| Flange/Fitting: 2.75 inch (NW35CF) ConFlat-type flange | G | |
| Flange/Fitting: 1/2 inch VCR-type male fitting | H | |
| Cables for Micro-Ion Gauges: 10 feet (3 meters) | 358011-10 | |
| Cables for Micro-Ion Gauges: 25 feet (7.6 meters) | 358011-25 | |
| Cables for Micro-Ion Gauges: 50 feet (15.2 meters) | 358011-50 |
358 Micro-Ion Gauge Controllers
| Description | Price | Catalog Number |
|---|---|---|
| Controller, for a Micro-Ion Gauge, with 3-line display, electron bombardment degas, and remote input/output interface (CE Marked¹) Choose one of the basic controllers and add the options below to create your catalog number and determine the price. See the example below. Micro-Ion Gauges are listed on page 22, Convectron Gauges are listed on page 17. | ||
| Half-rack mount | 358501 - # # # - # # | |
| Left mount for 19-inch rack | 358502 - # # # - # # | |
| Center mount for 19-inch rack | 358503 - # # # - # # | |
| Interface Options (Slot X): None | 0 | |
| Interface Options (Slot X): RS-232 | A | |
| Interface Options (Slot X): RS-485/422 | B | |
| Gauge Options (Slot Y): None | 0 | |
| Gauge Options (Slot Y): Dual Convectron® | 1 | |
| Gauge Options (Slot Y): Capacitance Manometer/Convectron Gauge¹ | 2 | |
| Setpoint Options (Slot Z): None | 0 | |
| Setpoint Options (Slot Z): 2 setpoint relays for Micro-Ion Gauge | A | |
| Setpoint Options (Slot Z): 6 setpoint relays, 2 per channel | B | |
| Display Options - Measurement units: Torr | T | |
| Display Options - Measurement units: mbar | M | |
| Display Options - Measurement units: Pa | P | |
| Power Cord Options: North America 115 Vac / Japan 100 Vac | 1 | |
| Power Cord Options: North America 240 Vac | 2 | |
| Power Cord Options: Universal Europe 220 Vac | 3 | |
| Power Cord Options: United Kingdom 240 Vac | 4 | |
| Example: To order a Series 358 Micro-Ion Gauge Controller with half-rack mount, RS-485 interface, dual Convectron Gauge operation, 6 setpoint relays, display in Torr, and North America 115 V power cord, select catalog number: 358501-B1B-T1 | ||
| Note: ¹ Capacitance Manometer/Convectron® Gauge option is not CE Marked. | ||
| Description | Price | Catalog Number |
|---|---|---|
| Option Cards (for field installation): RS-485/422 computer interface | 358006 | |
| Option Cards (for field installation): RS-232 computer interface | 358007 | |
| Option Cards (for field installation): Dual Convectron® Gauge module | 358002 | |
| Option Cards (for field installation): Process control with 2 setpoint relays for ionization gauge | 358004 | |
| Option Cards (for field installation): Process control with 6 setpoint relays, 2 per channel | 358003 | |
| Optional Rack-mount Installation Hardware (for field installation): Control unit on the left or right side for 19-inch rack | 370010 | |
| Optional Rack-mount Installation Hardware (for field installation): Control unit in the center for 19-inch rack | 370011 | |
| Optional Rack-mount Installation Hardware (for field installation): 2 control units side-by-side for 19-inch rack | 370021 | |
| Cables for: Micro-Ion Gauges: 10 feet (3 meters) | 358011-10 | |
| Cables for: Micro-Ion Gauges: 25 feet (7.6 meters) | 358011-25 | |
| Cables for: Micro-Ion Gauges: 50 feet (15.2 meters) | 358011-50 | |
| Cables for: Dual Convectron Gauges: 10 feet (3 meters) | 303040-10 | |
| Cables for: Dual Convectron Gauges: 25 feet (7.6 meters) | 303040-25 | |
| Cables for: Dual Convectron Gauges: 50 feet (15.2 meters) | 303040-50 | |
| Cables for: Dual Convectron Gauges: 100 feet (30.5 meters) | 303040-100 | |
| Cables for: Dual Convectron Gauges: 200 feet (61 meters) | 303040-200 | |
| Cables for: Capacitive Manometer/Convectron Gauges: 10 feet (3 meters) | 307027 | |
| Cables for: Capacitive Manometer/Convectron Gauges: 25 feet (7.6 meters) | 307028 | |
| Cables for: Capacitive Manometer/Convectron Gauges: 50 feet (15.2 meters) | 307029 | |
| Note: Series 355 Micro-Ion Gauges are listed on page 23. | ||
347 Stabil-Ion Modules
| Description | Price | Catalog Number |
|---|---|---|
| Stabil-Ion Module plus Gauge, no cable Select gauge type to create the appropriate catalog number. | 347054 - Y # - T | |
| Analog output, no relays, Yttria-coated iridium gauge filament, 2.75 ConFlat® fitting, measurement unit in Torr | ||
| Gauge Type: Extended Range | E | |
| Gauge Type: Ultra-High Vacuum (UHV) | U | |
| Example: To order a Stabil-Ion Module with extended range gauge, select catalog number 347054-YE-T. | ||
370 Stabil-Ion Gauge Controllers
| Description | Price | Catalog Number |
|---|---|---|
| Controller, for a Stabil-Ion Gauge, with 3-line display, electron bombardment degas, sequential operation of a second ion gauge, and remote input/output interface (CE Marked) Choose one of the basic controllers and add the options below to create your catalog number and determine the price. See the example below. Convectron Gauges are listed on page 17; Stabil-Ion Gauges are listed below. | ||
| Left mount, side-by-side with power supply for 19-inch rack | 370501 - # # # - # # | |
| Half-rack mount, remote power supply | 370502 - # # # - # # | |
| Interface Options (Slot X): None | 0 | |
| Interface Options (Slot X): RS-232 | A | |
| Interface Options (Slot X): RS-485 | B | |
| Interface Options (Slot X): IEEE-488 | C | |
| Gauge Options (Slot Y): None | 0 | |
| Gauge Options (Slot Y): Dual Convectron | 1 | |
| Gauge Options (Slot Y): Convectron/Capacitance Manometer¹ | 2 | |
| Setpoint Options (Slot Z): None | 0 | |
| Setpoint Options (Slot Z): 2 setpoint relays for Stabil-Ion Gauge | A | |
| Setpoint Options (Slot Z): 6 setpoint relays, 2 per channel | B | |
| Display Options - Measurement units: Torr | T | |
| Display Options - Measurement units: mbar | M | |
| Display Options - Measurement units: Pa | P | |
| Power Cord Options: North America 115 Vac / Japan 100 Vac | 1 | |
| Power Cord Options: North America 240 Vac | 2 | |
| Power Cord Options: Universal Europe 220 Vac | 3 | |
| Power Cord Options: United Kingdom 240 Vac | 4 | |
| Example: To order a Series 370 Stabil-Ion Gauge Controller and power supply mounted side-by-side for 19-inch rack, IEEE-488 interface, dual Convectron Gauge operation, 6 setpoint relays, display in Torr, and North America 115 V power cord, select catalog number: 370501-C1B-T1 | ||
| Notes: ¹ Capacitance Manometer/Convectron® Gauge option is not CE Marked. | ||
| Stabil-Ion Gauge with dual yttria-coated iridium filaments and Memory Module: Extended Range Gauge | 370120 | |
| Stabil-Ion Gauge with dual yttria-coated iridium filaments and Memory Module: UHV Range Gauge | 370121 | |
| Cables for: Convectron Gauge / capacitance diaphragm gauge: 10 feet (3 meters) | 307027 | |
| Cables for: Convectron Gauge / capacitance diaphragm gauge: 25 feet (7.6 meters) | 307028 | |
| Cables for: Convectron Gauge / capacitance diaphragm gauge: 50 feet (15.2 meters) | 307029 | |
| Cables for: IEEE-488: 3.3 feet (1 meter) | 303042 | |
| Cables for: IEEE-488: 6.6 feet (2 meters) | 303043 | |
| Cables for: IEEE-488: 13.2 feet (4 meters) | 303044 | |
| Description | Price | Catalog Number |
|---|---|---|
| Option Cards (for field installation): RS-232 computer interface | 370110 | |
| Option Cards (for field installation): RS-485 computer interface | 370150 | |
| Option Cards (for field installation): IEEE-488 computer interface | 370111 | |
| Option Cards (for field installation): Dual Convectron® Gauge | 370106 | |
| Option Cards (for field installation): Process control with 2 setpoint relays for ionization gauge | 370108 | |
| Option Cards (for field installation): Process control with 6 setpoint relays, 2 per channel | 370107 | |
| Optional Rack-mount Installation Hardware (for field installation): Control unit on the left or right side for 19-inch rack | 370010 | |
| Optional Rack-mount Installation Hardware (for field installation): Control unit in the center for 19-inch rack | 370011 | |
| Optional Rack-mount Installation Hardware (for field installation): 2 control units side-by-side for 19-inch rack | 370021 | |
| Optional Rack-mount Installation Hardware (for field installation): 1 or 2 power supplies for 19-inch rack | 370008 | |
| Optional Rack-mount Installation Hardware (for field installation): 1 controller and 1 power supply side-by-side in 19-inch rack, beige | 370009 | |
| Cables for: Stabil-Ion Gauge, side-by-side mounting: 10 feet (3 meters) | 360116-10 | |
| Cables for: Stabil-Ion Gauge, side-by-side mounting: 25 feet (7.6 meters) | 360116-25 | |
| Cables for: Stabil-Ion Gauge, side-by-side mounting: 50 feet (15.2 meters) | 360116-50 | |
| Cables for: Stabil-Ion Gauge, side-by-side mounting: 100 feet (30.5 meters) | 360116-100 | |
| Cables for: Stabil-Ion Gauge, side-by-side mounting: 200 feet (61 meters) | 360116-200 | |
| Cables for: Stabil-Ion Gauge, remote mounting of power supply: 10 feet (3 meters) | 360117-10 | |
| Cables for: Stabil-Ion Gauge, remote mounting of power supply: 25 feet (7.6 meters) | 360117-25 | |
| Cables for: Dual Convectron Gauges: 10 feet (3 meters) | 303040-10 | |
| Cables for: Dual Convectron Gauges: 25 feet (7.6 meters) | 303040-25 | |
| Cables for: Dual Convectron Gauges: 50 feet (15.2 meters) | 303040-50 | |
| Cables for: Dual Convectron Gauges: 100 feet (30.5 meters) | 303040-100 | |
| Cables for: Dual Convectron Gauges: 200 feet (61 meters) | 303040-200 |
Bayard-Alpert Ionization Gauges (Series 274)
| Description | Price | Catalog Number |
|---|---|---|
| Glass Tubulated Gauges: Single thoria-coated iridium filament: 3/4 inch Pyrex glass inlet port | 274002 | |
| Glass Tubulated Gauges: Single thoria-coated iridium filament: 3/4 inch Kovar metal inlet port | 274003 | |
| Glass Tubulated Gauges: Single thoria-coated iridium filament: 1 inch Pyrex glass inlet port | 274005 | |
| Glass Tubulated Gauges: Single thoria-coated iridium filament: 1 inch Kovar metal inlet port | 274006 | |
| Glass Tubulated Gauges: Single thoria-coated iridium filament: 15 mm Pyrex glass inlet port | 274036 | |
| Glass Tubulated Gauges: Single thoria-coated iridium filament: NW25KF flange with 1 inch port | 274032 | |
| Glass Tubulated Gauges: Single thoria-coated iridium filament: 1.33 inch (NW16CF) non-rotatable, 3/4 inch port | 274020 | |
| Glass Tubulated Gauges: Single thoria-coated iridium filament: 2.75 inch (NW35CF) non-rotatable, 3/4 inch port | 274007 | |
| Glass Tubulated Gauges: Single thoria-coated iridium filament: 2.75 inch (NW35CF) non-rotatable, 1 inch port | 274008 | |
| Glass Tubulated Gauges: Dual tungsten filaments: 3/4 inch Pyrex glass inlet port | 274012 | |
| Glass Tubulated Gauges: Dual tungsten filaments: 3/4 inch Kovar metal inlet port | 274013 | |
| Glass Tubulated Gauges: Dual tungsten filaments: 1 inch Pyrex glass inlet port | 274015 | |
| Glass Tubulated Gauges: Dual tungsten filaments: 1 inch Kovar metal inlet port | 274016 | |
| Glass Tubulated Gauges: Dual tungsten filaments: 15 mm Pyrex glass inlet port | 274037 | |
| Glass Tubulated Gauges: Dual tungsten filaments: 1.33 inch (NW16CF) non-rotatable, 3/4 inch port | 274021 | |
| Glass Tubulated Gauges: Dual tungsten filaments: 2.75 inch (NW35CF) non-rotatable, 3/4 inch port | 274017 | |
| Glass Tubulated Gauges: Dual tungsten filaments: 2.75 inch (NW35CF) non-rotatable, 1 inch port | 274018 | |
| Nude Gauges: Single thoria-coated iridium filament (resistive or electron bombardment degas): NW40KF flange with pin guard/locking strain relief | 274053 | |
| Nude Gauges: Single thoria-coated iridium filament (resistive or electron bombardment degas): 2.75 inch (NW35CF) non-rotatable | 274028 | |
| Nude Gauges: Single thoria-coated iridium filament (resistive or electron bombardment degas): 2.75 inch (NW35CF) non-rotatable, pin guard/locking strain relief | 274043 | |
| Nude Gauges: Replacement filament | 274029 | |
| UHV Nude Gauges: Dual thoria-coated iridium filament (electron bombardment degas only): NW40KF flange with pin guard/locking strain relief | 274058 | |
| UHV Nude Gauges: Dual thoria-coated iridium filament (electron bombardment degas only): 2.75 inch (NW35CF) non-rotatable | 274023 | |
| UHV Nude Gauges: Dual thoria-coated iridium filament (electron bombardment degas only): 2.75 inch (NW35CF) non-rotatable, pin guard/locking strain relief | 274042 | |
| UHV Nude Gauges: Replacement filaments | 274025 | |
| UHV Nude Gauges: Dual tungsten filaments (electron bombardment degas only): NW40KF flange | 274050 | |
| UHV Nude Gauges: Dual tungsten filaments (electron bombardment degas only): NW40KF flange, pin guard/locking strain relief | 274057 | |
| UHV Nude Gauges: Dual tungsten filaments (electron bombardment degas only): 2.75 inch (NW35CF) non-rotatable | 274022 | |
| UHV Nude Gauges: Dual tungsten filaments (electron bombardment degas only): 2.75 inch (NW35CF) non-rotatable, pin guard/locking strain relief | 274041 | |
| UHV Nude Gauges: Replacement filaments | 274024 | |
| Accessories: Glass tubulated test gauge with thoria-coated iridium filament, pumped down to approximately 10⁻⁵ Torr and sealed off. NOT to be used as a pressure reference. | 274031 |
307 Vacuum Gauge Controllers
| Description | Price | Catalog Number |
|---|---|---|
| Controller, for Series 274 Bayard-Alpert gauges, with 3-line display, sequential operation of a second ionization gauge, and remote input/output interface Choose one of the basic controllers and add the options below to create your catalog number and determine the price. See the example below. Ionization gauges are listed on page 29, Convectron Gauges are listed on page 17; Thermocouple gauge is listed on pages 19, 31. | ||
| Configured for Series 274 glass tubulated or nude (not UHV) Bayard-Alpert gauges with resistive degas: Left mount, side-by-side with power supply for 19-inch rack | 307502 - # # # - # # | |
| Configured for Series 274 glass tubulated or nude (not UHV) Bayard-Alpert gauges with resistive degas: Half-rack mount, remote power supply | 307501 - # # # - # # | |
| Configured for Series 274 UHV nude Bayard-Alpert gauges with electron bombardment degas, UHV electrometer (reads to 2x10⁻¹¹ Torr): Left mount, side-by-side with power supply for 19-inch rack | 307508 - # # # - # # | |
| Configured for Series 274 UHV nude Bayard-Alpert gauges with electron bombardment degas, UHV electrometer (reads to 2x10⁻¹¹ Torr): Half-rack mount, remote power supply | 307507 - # # # - # # | |
| Interface Options (Slot X): None | 0 | |
| Interface Options (Slot X): RS-232 | A | |
| Interface Options (Slot X): RS-485 | B | |
| Interface Options (Slot X): IEEE-488 | C | |
| Interface Options (Slot X): Linear Analog Output | D | |
| Gauge Options (Slot Y): None | 0 | |
| Gauge Options (Slot Y): Dual Convectron | 1 | |
| Gauge Options (Slot Y): Convectron / Capacitance Diaphragm | 2 | |
| Gauge Options (Slot Y): Dual Thermocouple | 3 | |
| Setpoint Options (Slot Z): None | 0 | |
| Setpoint Options (Slot Z): 2 setpoint relays for ion gauge | A | |
| Setpoint Options (Slot Z): 6 setpoint relays, 2 per channel | B | |
| Display Options - Measurement units: Torr | T | |
| Display Options - Measurement units: mbar | M | |
| Display Options - Measurement units: Pa | P | |
| Power Cord Options: North America 115 Vac / Japan 100 Vac | 1 | |
| Power Cord Options: North America 240 Vac | 2 | |
| Power Cord Options: Universal Europe 220 Vac | 3 | |
| Power Cord Options: United Kingdom 240 Vac | 4 | |
| Example: To order a Series 307 Vacuum Gauge Controller with half-rack mount, remote power supply, resistive degas, linear analog output, dual Convectron Gauge operation, 6 setpoint relays, display in Torr, and North America 115 V power cord, select catalog number: 307501-D1B-T1 | ||
| Description | Price | Catalog Number |
|---|---|---|
| Option Cards (for field installation): RS-232 computer interface | 307019 | |
| Option Cards (for field installation): RS-485 computer interface | 307262 | |
| Option Cards (for field installation): IEEE-488 computer interface | 307020 | |
| Option Cards (for field installation): Linear analog output for thermocouple and ionization gauges | 307100 | |
| Option Cards (for field installation): Dual Convectron® Gauge | 307013 | |
| Option Cards (for field installation): Convectron Gauge/capacitance diaphragm gauge | 307026 | |
| Option Cards (for field installation): Dual Thermocouple Gauge | 307014 | |
| Option Cards (for field installation): Process control with 2 setpoint relays for ionization gauge | 307018 | |
| Option Cards (for field installation): Process control with 6 setpoint relays, 2 per channel | 307017 | |
| Option Cards (for field installation): Remote control interface | 307012 | |
| Optional Installation Rack-Mount Hardware (for field installation): Power supply and control unit side-by-side for 19-inch rack | 307009 | |
| Optional Installation Rack-Mount Hardware (for field installation): Control unit on the left or right side for 19-inch rack | 307010 | |
| Optional Installation Rack-Mount Hardware (for field installation): Control unit in the center of 19-inch rack | 307011 | |
| Optional Installation Rack-Mount Hardware (for field installation): 2 control units side-by-side for 19-inch rack | 307021 | |
| Optional Installation Rack-Mount Hardware (for field installation): 1 or 2 power supplies for 19-inch rack | 307008 | |
| Optional Installation Rack-Mount Hardware (for field installation): Power supply in half-rack panel | 307114 | |
| Thermocouple Gauge: DV6-R, with metal alignment key (the metal thermocouple body is brazeable Monel) | 270006 | |
| Power Supplies, Field Replacement: Sequential ionization gauge, EB degas,220 VAC | 307253 | |
| Power Supplies, Field Replacement: Sequential ionization gauge, EB degas,115 VAC | 307254 | |
| Power Supplies, Field Replacement: Sequential ionization gauge, resistive degas,220 VAC | 307255 | |
| Power Supplies, Field Replacement: Sequential ionization gauge, resistive degas,115 VAC | 307256 | |
| Cables for Tubulated Glass Ionization Gauges: For side-by-side mounting: 10 feet (3 meters) | 307042 | |
| Cables for Tubulated Glass Ionization Gauges: For side-by-side mounting: 25 feet (7.6 meters) | 307043 | |
| Cables for Tubulated Glass Ionization Gauges: For side-by-side mounting: 50 feet (15.2 meters) | 307044 | |
| Cables for Tubulated Glass Ionization Gauges: For remote mounting of power supply: 10 feet (3 meters) | 307030 | |
| Cables for Tubulated Glass Ionization Gauges: For remote mounting of power supply: 25 feet (7.6 meters) | 307031 | |
| Cables for Tubulated Glass Ionization Gauges: For remote mounting of power supply: 50 feet (15.2 meters) | 307032 |
| Description | Price | Catalog Number |
|---|---|---|
| Cables for Nude Ionization Gauges: With push-on pins, side-by-side mounting: 10 feet (3 meters) | 307046 | |
| Cables for Nude Ionization Gauges: With push-on pins, side-by-side mounting: 25 feet (7.6 meters) | 307047 | |
| Cables for Nude Ionization Gauges: With push-on pins, side-by-side mounting: 50 feet (15.2 meters) | 307048 | |
| Cables for Nude Ionization Gauges: With push-on pins, remote mounting of power supply: 10 feet (3 meters) | 307034 | |
| Cables for Nude Ionization Gauges: With push-on pins, remote mounting of power supply: 25 feet (7.6 meters) | 307035 | |
| Cables for Nude Ionization Gauges: With push-on pins, remote mounting of power supply: 50 feet (15.2 meters) | 307036 | |
| Cables for Nude Ionization Gauges: With pin guard/locking strain relief for electron bombardment degas, side-by-side mounting: 10 feet (3 meters) | 307046-CE* | |
| Cables for Nude Ionization Gauges: With pin guard/locking strain relief for electron bombardment degas, side-by-side mounting: 25 feet (7.6 meters) | 307047-CE* | |
| Cables for Nude Ionization Gauges: With pin guard/locking strain relief for electron bombardment degas, side-by-side mounting: 50 feet (15.2 meters) | 307048-CE* | |
| Cables for Nude Ionization Gauges: With pin guard/locking strain relief for electron bombardment degas, remote mounting of power supply: 10 feet (3 meters) | 307034-CE* | |
| Cables for Nude Ionization Gauges: With pin guard/locking strain relief for electron bombardment degas, remote mounting of power supply: 25 feet (7.6 meters) | 307035-CE* | |
| Cables for Nude Ionization Gauges: With pin guard/locking strain relief for electron bombardment degas, remote mounting of power supply: 50 feet (15.2 meters) | 307036-CE* | |
| Cables for Nude Ionization Gauges: With pin guard/locking strain relief for resistive degas, side-by-side mounting: 10 feet (3 meters) | 307046-CR* | |
| Cables for Nude Ionization Gauges: With pin guard/locking strain relief for resistive degas, side-by-side mounting: 25 feet (7.6 meters) | 307047-CR* | |
| Cables for Nude Ionization Gauges: With pin guard/locking strain relief for resistive degas, side-by-side mounting: 50 feet (15.2 meters) | 307048-CR* | |
| Cables for Nude Ionization Gauges: With pin guard/locking strain relief for resistive degas, remote mounting of power supply: 10 feet (3 meters) | 307034-CR* | |
| Cables for Nude Ionization Gauges: With pin guard/locking strain relief for resistive degas, remote mounting of power supply: 25 feet (7.6 meters) | 307035-CR* | |
| Cables for Nude Ionization Gauges: With pin guard/locking strain relief for resistive degas, remote mounting of power supply: 50 feet (15.2 meters) | 307036-CR* | |
| * Bakeable to 150°C. For higher temperature bakeable cables contact Brooks Customer Support. | ||
| Cables for: Dual Convectron Gauges: 10 feet (3 meters) | 303040-10 | |
| Cables for: Dual Convectron Gauges: 25 feet (7.6 meters) | 303040-25 | |
| Cables for: Dual Convectron Gauges: 50 feet (15.2 meters) | 303040-50 | |
| Cables for: Dual Convectron Gauges: 100 feet (30.5 meters) | 303040-100 | |
| Cables for: Dual Convectron Gauges: 200 feet (61 meters) | 303040-200 | |
| Cables for: Dual thermocouple gauges: 10 feet (3 meters) | 307054 | |
| Cables for: Dual thermocouple gauges: 25 feet (7.6 meters) | 307055 | |
| Cables for: Dual thermocouple gauges: 50 feet (15.2 meters) | 307056 | |
| Cables for: Convectron Gauge / capacitance diaphragm gauge: 10 feet (3 meters) | 307027 | |
| Cables for: Convectron Gauge / capacitance diaphragm gauge: 25 feet (7.6 meters) | 307028 | |
| Cables for: Convectron Gauge / capacitance diaphragm gauge: 50 feet (15.2 meters) | 307029 | |
| Cables for: IEEE-488: 3.3 feet (1 meter) | 303042 | |
| Cables for: IEEE-488: 6.6 feet (2 meters) | 303043 | |
| Cables for: IEEE-488: 13.2 feet (4 meters) | 303044 | |
350 UHV Ionization Gauge Controllers
| Description | Price | Catalog Number |
|---|---|---|
| Controller, for a Series 274 UHV nude Bayard-Alpert gauge, with 1-line display, electron bombardment degas, and remote input/output interface (CE Marked) UHV Ionization gauges are listed on page 29. | ||
| Half-rack mount | 350501 - # - # # | |
| Left mount for 19-inch rack | 350502 - # - # # | |
| Center mount for 19-inch rack | 350503 - # - # # | |
| Half-rack mount, 3 digit display | 350504- # - # # | |
| Options: None | 0 | |
| Options: RS-232 | A | |
| Options: RS-232 or RS-485 switchable with 4 setpoint relays | F | |
| Options: 2 setpoint relays for ion gauge | G | |
| Display Options - Measurement units: Torr | T | |
| Display Options - Measurement units: mbar | M | |
| Display Options - Measurement units: Pa | P | |
| Power Cord Options: North America 115 Vac | 1 | |
| Power Cord Options: North America 240 Vac | 2 | |
| Power Cord Options: Universal Europe 220 Vac | 3 | |
| Power Cord Options: United Kingdom 240 Vac | 4 | |
| Example: To order a Series 350 UHV Ionization Gauge Controller with 3-line display, half-rack mount, RS-232 or RS-485 switchable interface with 4 setpoint relays, display in Torr, and North America 115 V power cord, select catalog number: 350501-G-T1 | ||
| Controller, for a Series 274 UHV nude Bayard-Alpert gauge and dual Convectron Gauge operation, with 3-line display, electron bombardment degas, and remote input/output interface (CE Marked) UHV Ionization gauges are listed on page 26; Convectron Gauges are listed on page 17. | ||
| Half-rack mount | 350507 - # - # # | |
| Left mount for 19-inch rack | 350508 - # - # # | |
| Center mount for 19-inch rack | 350509 - # - # # | |
| Options: None | 0 | |
| Options: RS-232 or RS-485 switchable with 4 setpoint relays | F | |
| Display Options - Measurement units: Torr | T | |
| Display Options - Measurement units: mbar | M | |
| Display Options - Measurement units: Pa | P | |
| Power Cord Options: North America 115 V | 1 | |
| Power Cord Options: North America 240 V | 2 | |
| Power Cord Options: Universal Europe 220 V | 3 | |
| Power Cord Options: United Kingdom 240 V | 4 | |
| Example: To order a Series 350 UHV Ionization Gauge Controller with 3-line display, half-rack mount, RS-232 or RS-485 switchable interface with 4 setpoint relays, display in Torr, and North America 115 V power cord, select catalog number: 350507-F-T1 | ||
| Description | Price | Catalog Number |
|---|---|---|
| Option Cards for Controller with 1-line display (for field installation): RS-232 computer interface | 350003 | |
| Option Cards for Controller with 1-line display (for field installation): RS-485 with 4 setpoint relays for ion gauge | 350027 | |
| Option Cards for Controller with 1-line display (for field installation): 2 setpoint relays for ion gauge | 350002 | |
| Option Card for Controller with 3-line display (for field installation): RS-232 or RS-485 switchable interface with 4 setpoint relays | 350027 | |
| Optional Installation Hardware (for field installation): Rack-mount kits: Control unit on the left or right side for 19-inch rack | 307010 | |
| Optional Installation Hardware (for field installation): Rack-mount kits: Control unit in the center for 19-inch rack | 307011 | |
| Optional Installation Hardware (for field installation): Rack-mount kits: 2 control units side-by-side for 19-inch rack | 307021 | |
| Cables wired with internal collector cable and dual-filament switching: Nude ionization gauges with push-on pins: 10 feet (3 meters) | 350004 | |
| Cables wired with internal collector cable and dual-filament switching: Nude ionization gauges with push-on pins: 25 feet (7.6 meters) | 350005 | |
| Cables wired with internal collector cable and dual-filament switching: Nude ionization gauges with push-on pins: 50 feet (15.2 meters) | 350006 | |
| Cables wired with internal collector cable and dual-filament switching: Nude ionization gauges with pin guard/locking strain relief: 10 feet (3 meters) | 350004-C* | |
| Cables wired with internal collector cable and dual-filament switching: Nude ionization gauges with pin guard/locking strain relief: 25 feet (7.6 meters) | 350005-C* | |
| Cables wired with internal collector cable and dual-filament switching: Nude ionization gauges with pin guard/locking strain relief: 50 feet (15.2 meters) | 350006-C* | |
| Cables for: Dual Convectron Gauges: 10 feet (3 meters) | 303040-10 | |
| Cables for: Dual Convectron Gauges: 25 feet (7.6 meters) | 303040-25 | |
| Cables for: Dual Convectron Gauges: 50 feet (15.2 meters) | 303040-50 | |
| Cables for: Dual Convectron Gauges: 100 feet (30.5 meters) | 303040-100 | |
| Cables for: Dual Convectron Gauges: 200 feet (61 meters) | 303040-200 | |
| * Bakeable to 150°C. For higher temperature bakeable cables contact Brooks Customer Support. | ||
Valves
203 Variable Leak Valves
| Description | Price | Catalog Number |
|---|---|---|
| Manual Variable Leak Valves: 1/4 inch stainless steel tubulation on both ports, no flanges | 203019 - # # | |
| Manual Variable Leak Valves: 1.33 inch (NW16CF) ConFlat®-type flanges on both ports | 203021 - # # | |
| Manual Variable Leak Valves: 2.75 inch (NW35CF) ConFlat-type flanges on both ports | 203017 - # # | |
| Manual Variable Leak Valves: ConFlat-type flanges, 2.75 inch (NW35CF) on port A and 1.33 inch (NW16CF) on port B | 203038 - # # | |
| Manual Variable Leak Valves: 1/4 inch VCR®-type female fittings on both ports | 203036 - # # | |
| Manual Variable Leak Valves: 1/4 inch VCO®-type female fittings on both ports | 203041 - # # | |
| Bend styles for Series 203 Leak Valves (see the illustration below): Style 01 (See note 1 below) | 01 | |
| Bend styles for Series 203 Leak Valves (see the illustration below): Style 02 | 02 | |
| Bend styles for Series 203 Leak Valves (see the illustration below): Style 03 (See note 2 below) | 03 | |
| Bend styles for Series 203 Leak Valves (see the illustration below): Style 04 | 04 | |
| Bend styles for Series 203 Leak Valves (see the illustration below): Style 05 (See note 2 below) | 05 | |
| Example: To order a Series 203 Variable Leak Valve with 1.33 inch ConFlat fittings on both ports and tubulation bend styles 03, select catalog number: 203021-03 | ||
| Replacement Valve Bodies: 1/4 inch stainless steel tubulation on both ports, no flanges | 203014 - # # | |
| Replacement Valve Bodies: 1.33 inch (NW16CF) ConFlat-type flanges on both ports | 203022 - # # | |
| Replacement Valve Bodies: 2.75 inch (NW35CF) ConFlat-type flanges on both ports² | 203018 - # # | |
| Replacement Valve Bodies: 2.75 inch (NW35CF) on port A and 1.33 inch (NW16CF) on port B | 203039 - # # | |
| Replacement Valve Bodies: 1/4 inch VCR-type female fittings on both ports | 203037 - # # | |
| Replacement Valve Bodies: 1/4 inch VCO-type female fittings on both ports | 203042 - # # | |
| Bend styles for Series 203 Leak Valves (see the illustration below): Style 01 (See note 1 below) | 01 | |
| Bend styles for Series 203 Leak Valves (see the illustration below): Style 02 | 02 | |
| Bend styles for Series 203 Leak Valves (see the illustration below): Style 03 (See note 2 below) | 03 | |
| Bend styles for Series 203 Leak Valves (see the illustration below): Style 04 | 04 | |
| Bend styles for Series 203 Leak Valves (see the illustration below): Style 05 (See note 2 below) | 05 | |
| Notes: 1. Bend style 01 is only available for catalog numbers 203019 and 203014. 2. Bend styles 03 and 05 are not available with catalog numbers 203017 and 203018. 3. Use Center Port B as the inlet port if the inlet pressure is over 25 psig. | ||
| Bakeout Clamp for 203 Leak Valve | 006771 | |
204 One Inch Gold Seal Valve, Ultra-high Vacuum Valves
| Description | Price | Catalog Number |
|---|---|---|
| Replacement Parts: Replacement nosepiece | 204008 | |
| Replacement Parts: Replacement nosepiece kit with installation tweezers | 204014 |