P22 Smart Watch User Manual

Appearance Explanation

Short strap:

Long strap:

Touch area of the whole screen: Sliding up, down, left and right, and long press for selection are supported.

Side key: Keep a long press of three seconds for powering on and powering off.

Charging contacts

Green light sensor

Charging Diagram

1. Please align the magnetic charger to the contact on the back of the device for charging.

2. Plug the USB tap into the USB adapter (excluding in the packaging).

Diagram: Shows a magnetic charger connecting to charging contacts on the back of the device, and then plugging into a USB adapter.

Functions Introduction

This product is a Wireless transmission product, and many functions need to be connected with the supporting APP before it can be used, such as time synchronization, call reminder and information content push, weather display, remote camera, music control, etc.

Bracelet Time Main Page

Show Bracelet Time, date, Steps: record the current number of steps of the bracelet, Calories and distance synchronously.

Exercise

Long press in the exercise page, the corresponding sports mode can be selected for measurement. This product supports 8 sports modes such as walking, running, cycling and jumping rope. The last exercise information can be displayed on the exercise page.

Heart rate

The length of the heart rate page in the hand ring can measure your current heart rate. The latest 7 heart rate measurements can be displayed on this page. More detailed information analysis and data record can be viewed in the APP synchronously.

Blood pressure

The blood pressure page of the bracelet can measure your current blood pressure. This page can display the latest 7 times blood pressure measurements. More detailed information analysis and data record can be viewed in the APP synchronously.

Blood oxygen

Long press in the blood oxygen page can measure your current blood oxygen value. This page can display the data of the last 7 times blood oxygen tests. More detailed information analysis and data can be viewed in the APP.

Sleep

The bracelet records and shows the total sleep time you had last night, as well as deep sleep time, light sleep time. More detailed information analysis and data record can be viewed in the APP synchronously.

Sports information

The bracelet shows the most recent movement Information such as motion mode, time, heart rate, etc.

Weather information

The weather page will display current weather, air quality information, and conditions for tomorrow. This function works must connect to the APP, and the phone must open GPS positioning, and allow the APP to have access to the phone's location. If you disconnect or turn off your phone's GPS for a long time, the weather information will not be updated.

Message notification

The bracelet can receive phone calls, text messages, WeChat, QQ and other notifications and alerts on the phone, and the corresponding push project switch can be opened on the APP. This page can store the last 3 message records. Note that this function should be connected to the bracelet in the APP and the Settings should be completed according to the prompts.

Stopwatch

Stopwatch started with a long press on the stopwatch page. Long press again to end the time.

Take Photo control

After connecting to the APP, the bracelet can be used as the remote control of the phone camera. Open the camera on the phone, and long press the touch screen to take photos.

Music control

After connecting to the APP, the bracelet can control the play/pause/play of music player on the mobile phone. This function must open the mobile phone player before you can control on the smart bracelet.

Settings

On this page, long press to select other function settings, including stopwatch/mute / brightness adjustment/restore factory Settings/shutdown.

Bracelet APP Installation

You can search for hero band III downloads in the APP Store. Do not directly on android phones Scan the following QR code to download the APP to connect. Apple mobile phone.

Diagram: Shows QR codes for downloading the app.

APP Operation Instructions

1. Enter the APP movement page and press your phone screen to pull down and refresh the bracelet data.
2. Click the steps, sleep and other blocks, and enter the analysis of the daily or recent exercise and sleep data.
3. Click the exercise heart rate/blood pressure blocks to enter the data of the day or recent, or click the APP to measure the heart rate and blood pressure. The test data will be automatically saved to the phone.

Connecting Smart Bracelet

Open the mobile client to set personal information.

Switch to the [device] page and click [bind device].

Click on your device in the list of devices scanned.

Diagram: Shows a list of devices and a 'Bind completed' confirmation.

Note: When the phone is connected to the bracelet, it needs to keep the Bluetooth of the phone open, and there is no other matching device in the Bluetooth of the phone. Do not connect your Android phone directly to your mobile phone in Bluetooth.

Frequently Asked Questions And Answers

1. The bracelet cannot receive the reminder.

Android phone Settings:

• A: Make sure the APP has an alert switch on.
• B: Confirm whether the message can be displayed normally on the notification bar, and the notification push of the bracelet can be read. If there is no message in the notification bar, the bracelet will not receive the push. (Need to find notification and status bar in mobile phone settings, and open WeChat, QQ, phone, SMS, Do Fit switch).
• C: Open the APP -- click 'other Settings' -- click 'auxiliary function' -- open the 'Do Fit' switch.

Apple system phone settings:

• A: Make sure to select the allowed pairing when connecting the bracelet. It can be checked in the phone Settings - Bluetooth. If there is a device connected in the backend, indicating that a pairing has been made. If there is no pairing, reconnecting after unbind.
• B: Open the phone settings -- click on the notification -- click WeChat, QQ, SMS, phone -- open the permission notice.

2. Android phones don't connect the bracelet.

For Android phones, please do not connect with the bracelet directly in the Bluetooth of the phone. Please download the APP firstly. And go to the APP to search the device and connect.

Restart your phone's Bluetooth and bracelet if necessary.

Attention

• Do not charge in condition of water stains.
• This product is an electronic monitoring product, which is not used as medical treatment. The data is for reference only.
• Don't wear this device when bathing or swimming for a long time.
• Use the matching charging cable for charging.

FCC Warning

a. § 15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

b. § 15.21 Changes or modification warning.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

c. § 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• -Reorient or relocate the receiving antenna.
• -Increase the separation between the equipment and receiver.
• -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• -Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.