Valore | Mobility and Lifestyle Goods
Instruction Manual for VALORE models including: BTS35, Wireless Gaming Headphone, BTS35 Wireless Gaming Headphone, Gaming Headphone, Headphone
The headphone will turn off automatically when charging. ... Issue 1: Headphone is unable to connect successfully to your mobile device Problem 1: Headphone’s battery is flat.. View
Wireless Gaming Headphone (BTS35) Thank you for purchasing the Valore Wireless Gaming Headphone (BTS35). • USB-C charging • Connect up to 2 devices^
File Info : application/pdf, 5 Pages, 421.50KB
DocumentDocumentWireless Gaming Headphone (BTS35)
Thank you for purchasing the Valore Wireless Gaming Headphone (BTS35).
· USB-C charging · Connect up to 2 devices^ · Wired or wireless mode option · Low latency (65ms) mode for a competitive Gaming experience · CVC 6.0 noise reduction microphone
^ only 1 device can be active at a time
Important: Please read the user manual thoroughly before using your wireless headphones
Specifications: · Wireless range: 10m · Battery capacity: 1000mAh · Charging time: Approximately 2 hours · Playback/working time: Up to 50 hours · Standby time: Up to 360 hours · Power input: DC5V/1A · Microphone resistance: 32±15% · Microphone sensitivity: 103±3dB · Frequency range: 20-20000Hz · Speaker size: Ø40mm
Package Contents: · Wireless gaming headphone · USB-C charging cable · Audio cable
UNDERSTANDING THE PRODUCT
START USING THE WIRELESS HEADPHONES
1) Charging When batter is low, charger with provided cable for approximately 2 hours. The headphone will turn off automatically when charging. Red LED light on when charging, off when fully charged. 2) Pairing the wireless headphones (switched off) Step 1: Activate Bluetooth function on your mobile device to begin pairing with earphones. Step 2: Press and hold onto the Power button (Right button) until the LED light flickers
red and blue. Step 3: Connect to the headphones by selecting `Valore BTS35' under the device list. Step 4: Once connected, the Blue LED light at the will flash slowly.
Note: If the pairing is not successful, please turn off wireless heaphones first, and then re-pair again. After pairing is successful, paired devices will remember each other. Unless pairing information is deleted because of new pairing, no need to pair when using the next time. If you want to pair the wireless headphones with other devices, please turn off Bluetooth function of existing source device, and pair the wireless headphones with the new device according to steps 1-4 mentioned above.
3) LED indicator light
4) Basic key operation
TROUBLESHOOTING
Issue 1: Headphone is unable to connect successfully to your mobile device Problem 1: Headphone's battery is flat Solution: Fully charge the headphone (2.5 hours) and retry connection with your mobile device.
Problem 2: Headphone not paired to your mobile device Solution: Make sure that the headphone is successfully paired upon selecting `Valore BTS31' in the device list.
Problem 3: Headphone and mobile device too far apart Solution: Make sure that the headphone is within a metre range during pairing and connection.
Problem 4: Headphone is connected to other mobile device Solution: Make sure that the headphone has already been disconnected before making a new
connection with a new device.
Issue 2: Sound from the headphone is too soft or silent Problem 1: Headphone's battery is low / flat Solution: Fully charge the headphone (2 hours) and retry connection with your mobile device.
Problem 2: Headphone or mobile device's volume is too low Solution: Turn the volume of the headphone or mobile device up to increase the volume.
Problem 3: Music track may not be audible Solution: Make sure that the music track is of a playable format for the mobile device.
Problem 4: Headphone and mobile device might not be connected properly. Solution: Repeat the connection step via Bluetooth/auxiliary cable again to make sure that it
is connected properly and try again.
TECHNICAL SUPPORT & WARRANTY
· For Technical Support, email us at v.info@valore.sg. · For Warranty Registration, visit www.valore.sg.
Cautions: Read all the instructions and warnings carefully prior to using this product. · Do not store the headphone in a high temperature environment. · Do not place the headphone near a fire or other excessively hot environments. · Do not expose this headphone to moisture or submerge it in liquid. Keep headphone dry at
all times. · Do not attempt to charge the headphone using any other method or connection other than
the headphone's provided charging cable. · Do not disassemble this headphone or attempt to repair or modify it in any manner. · Be cautious of excessive drops, bumps, abrasions or other impacts to this headphone. If
there is any damage to the headphone such as dents, punctures, tears, deformities or corrosion, stop using the headphone and contact us immediately via email at v.info@valore.sg, or return this product to the store where you have purchased it from. · If the product produces an abnormal smell, high temperature (low temperature during normal use), discolours or changes shape abnormally, stop using the product and contact us immediately via email at v.info@valore.sg.
DISCLAIMER & TRADEMARKS
All information, trademarks, logos, graphics, and images ("Materials") provided on this user manual are copyrighted or trademarked and are the property of Valore Lifestyle Pte Ltd. Any unauthorized use of any material contained on the instruction manual may violate copyright laws, trademark laws, laws of privacy and communications statutes.
The trademarks, service marks and logos used and displayed in the Materials are registered and unregistered trademarks and service marks of Valore and others. All other registered and unregistered company names, product names and marks mentioned herein the ("Materials") are the property of their respective owners and may be trademarks or registered trademarks.
Inspired by Valore Singapore For full range of Valore products visit www.valore.sg