V1021 Alarm Clock Instructions

Structure

The alarm clock features the following indicators and displays:

• ① AM/PM Indicator
• ② Time Display
• ③ Alarm Indicator
• ④ Month & Date Display
• ⑤ Monday to Sunday Display
• ⑥ Temperature Display

The device has several buttons for control:

• Volume of the Alarm
• ② Alarm 1/2 Switch
• ③ 12/24 H Switch
• ④ °C/°F Switch
• ⑤ Time Setting
• ⑥ Brightness Adjustment
• ⑦ Scroll Wheel
• ⑧ Power Input
• USB Charging Ports
• ⑩ CR 2032 Battery Compartment
• Reset Button

Package Includes

• 1 x Digital Alarm Clock
• 1 x User Manual
• 1 x USB Type C Cable
• 1 x 5V 2A Power Adapter

Setting

2.1 Operating Instructions

1. Please connect the type-c end of the power cord to the power input of the alarm clock.
2. Connect the power adapter to a power outlet.
3. The device has 2 USB Output ports on the back (5V, 2A) which allows you to charge Android or Apple system smartphones simultaneously.

2.2 Time Setting

1. HOLD "TIME" button for 3 secs to enter Time Setting Menu.
2. "YEAR" flashing: Turn scroll wheel " + - " to select the correct "YEAR" value. Press "TIME" button to confirm.
3. "MONTH & DATE" flashing: Turn scroll wheel " + - " to select the correct value. Press "TIME" button and proceed.
4. "DAY" will match automatically based on the year and date set.
5. "TIME" flashing: Turn scroll wheel " + - " to select the correct "TIME" value. Press "TIME" button to confirm.
6. Time setting is finished!

2.3 Normal Time Or Military Time (12H/24H)

Press the "12/24H" button to change the display mode between 12-hour (AM/PM) and 24-hour format.

2.4 Alarm Setting

1. HOLD "AL1" button for 3 secs to enter "Alarm 1 Setting". (Alarm 2 follows the same operation.)
2. The time and Alarm 1 indicator will flash. Turn the scroll wheel " + - " to adjust the Alarm 1 ring time. Press "AL1" button to confirm.
3. Alarm Mode: Turn the scroll wheel " + - " to adjust the Alarm Mode. Press "AL1" button to confirm. The available modes are:
   • "1-7": Daily Mode (MON-SUN) - Rings every day.
   • "1-5": Workday Mode (MON-FRI) - Rings on weekdays.
   • "6-7": Weekend Mode (SAT-SUN) - Rings on weekends.
4. Alarm Tone: Turn the scroll wheel " + - " to select from the 8 available alarm tones (51-58). Press "AL1" button to finish.
5. After setting, "Alarm 1" will be automatically turned on by default. The "▲" symbol will be on to indicate "AL 1" is ON.

2.5 Volume of Alarm

Press the volume button (🔊) to adjust the volume of the alarm. There are 6 volume levels (V1-V6), ranging from 5% to 100%. Adjust the volume to your preference.

2.6 Brightness Setting

Press the brightness button (☼) or turn the scroll wheel to adjust brightness. There are 6 brightness levels (L1-L6), ranging from 5% to 100%. Select your preferred brightness.

2.7 Temperature Setting

Press the "°C/°F" button to change the temperature unit between Celsius (°C) and Fahrenheit (°F).

2.8 Snooze

1. When the alarm goes off, press “SNOOZE” on the top. The corresponding alarm indicator light will flash, giving you an extra 9 minutes of snooze time. The snooze function will automatically shut off after 4 consecutive uses.
2. To turn off the snooze feature, press any button on the back twice. This will stop the flashing of the alarm indicator light. The alarm will go off on the next day.

Reset

1. Use a needle or a little stick to press the "Reset" button and the alarm clock will be reset.
2. The CR 2032 battery is for memory settings only. The clock can restore the correct time even after a power outage.

Product Features

• Input Voltage: AC110v-240V, 50/60HZ.
• Output Voltage: DC5V / 1500MA-2000MA.

Trouble Shooting

1. Missing power accessories, or instructions: Please contact us on Amazon or by email for a new replacement.
2. Temperature Inaccuracy: The temperature sensor is pre-set inside the clock. As electronic components may produce heat when working, it is normal for the temperature reading to differ by 1-2 degrees from a professional thermometer.
3. Manual Temperature Reset: The temperature cannot be reset manually as it is detected by the sensor automatically. If the difference is higher than 5 degrees, please contact us for a new replacement.
4. Time Not Restoring After Power Outage: If your alarm clock cannot restore the correct time after a power outage, the CR2032 battery on the back of the clock may be depleted. Please try replacing the battery. Note: The CR2032 is only used to store the alarm clock's settings and cannot be used to power the clock separately.
5. Slippery Clock: If the alarm clock is too slippery, use the provided rubber bumpers. Stick them on the bottom of the alarm clock as shown in the diagram to prevent sliding.