Introduction
Thank you for purchasing the Nature Walk Touch & Learn Wooden Walker™! Take your first steps around the house with this eco-friendly wooden walker. Discover shapes, colors, numbers, animals, and seven different musical styles.
Key Features:
- Light-Up Number Buttons
- Bead Slider
- Animal Buttons
- Music Button
- Caterpillar Disc
- Mode Switch
- Off/Low/High Volume Switch
- Weather Dial
- Star Lights
- Flower Petal Shape Sorter
- Ladybug Slider
- Snail Bead Roller
- Shape Blocks
Included in the Package
The package includes the Nature Walk Touch & Learn Wooden Walker™ (in 7 pieces) and assembly materials.
Walker Components:
- Gear Side Panel
- Front Panel
- Window Side Panel
- Handle
- Supporting Bar
Assembly Materials:
- Screws x 12 [screw]
- Hex wrench [hex wrench]
- Front Wheels x 2
- Shape Blocks (Four)
- Instruction Manual
[warning] All packing materials, such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords, and packaging screws, are not part of this toy and should be discarded for your child's safety.
[note] Please save this Instruction Manual as it contains important information.
[note] Please inquire about the availability of FSC Products.
Assembly Instructions
- Attach the front panel to the gear side panel using 4 [screw]s. Use the [hex wrench] to turn 4-5 turns to tighten the screws.
- Attach the handle with a one-time snap mechanism.
- Attach the supporting bar to the side panel at the base with 2 [screw]s.
- Attach the side panel with the sliding window to the front panel and supporting bar using 6 [screw]s.
- Attach the front wheels with a one-time snap mechanism.
[note] The [hex wrench] provided in this package is not a toy. Please retain this tool for future use and store it where a child cannot access it.
[attention] Adult assembly is required. This product contains small parts. For your child's safety, do not allow your child to play with the toy until it is fully assembled.
Instructions
Battery Removal and Installation
- Ensure the unit is turned Off [switch].
- Locate the battery cover on the back of the unit. Use a screwdriver to loosen the [screw] and open the battery cover.
- Remove old batteries by pulling up on one end of each battery.
- Install 3 new AA (AM-3/ LR6) batteries, following the diagram inside the battery compartment. For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended. Ensure correct [polarity symbol] (+ and -) are observed.
- Replace the battery cover and tighten the [screw] to secure it.
[warning] Adult assembly is required for battery installation. Keep batteries out of reach of children.
Important Battery Information:
- Insert batteries with the correct polarity [polarity symbol] (+ and -).
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
- Only batteries of the same or equivalent type as recommended should be used.
- Do not short-circuit the supply terminals.
- Remove batteries during extended periods of non-use.
- Remove exhausted batteries from the toy.
- Dispose of batteries safely. Do not dispose of batteries in fire [fire symbol].
Rechargeable Batteries:
- Remove rechargeable batteries (if removable) from the toy before charging.
- Rechargeable batteries should only be charged under adult supervision.
- Do not charge non-rechargeable batteries.
Product Features
- Off/Low/High Volume Switch [switch]: Slide to turn the unit On (Low or High) or Off.
- Speed Control [arrow]: Allows for two ways to play. Set to [seated play icon] for seated play with interactive features. Set to [walking play icon] to practice walking.
- Mode Switch: Slide to select Explore, Learn, or Music Mode.
- Light-Up Number Buttons: Press the five colorful buttons to learn numbers and counting.
- Animal Buttons: Press one of the seven colorful buttons to learn animal names, colors, and sounds.
- Flower Petal Shape Sorter: Insert the four Shape Blocks into the sorter to practice hand-eye coordination and learn colors and shapes.
- Music Button: Press to hear learning songs and melodies.
- Fine Motor Manipulatives: Engage with interactive elements: flip the caterpillar disc to reveal a butterfly, slide the ladybug, turn the gears, slide the beads, spin the snail bead roller, or play with the peek-a-boo slider.
- Weather Dial: Turn to explore sunny, rainy, and snowy weather and related activities.
- Star Lights: Watch a colorful starry light show synchronized with the music.
Lyrics: Nature Walk Song
Walking, we're talking, About colors in nature, A blue bird, a red fox, A green grasshopper, I see a purple butterfly, 1, 2, 3, 4, 5
Care & Maintenance
- Keep the unit clean by wiping it with a slightly damp cloth.
- Keep the unit out of direct sunlight and away from direct heat sources.
- Remove batteries if the unit will not be used for an extended period.
- Do not drop the unit on hard surfaces or expose it to moisture or water.
Troubleshooting
If the unit stops working or malfunctions, follow these steps:
- Turn the unit Off [switch].
- Interrupt the power supply by removing the batteries.
- Let the unit stand for a few minutes, then replace the batteries.
- Turn the unit On. The unit should now be ready to use again.
- If the unit still does not work, install a new set of batteries.
Environmental Phenomena
The unit may malfunction due to radio-frequency interference. Normal operation should resume when interference stops. If not, turn the unit Off and On again, or remove and reinstall batteries. In case of electrostatic discharge, the unit may malfunction and lose memory, requiring a reset by removing and reinstalling batteries.
Compliance Information
FCC Compliance
[FCC compliance] This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception (which can be determined by turning the equipment Off and On), the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
[caution] Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Supplier's Declaration of Conformity
Trade Name: LeapFrog®
Model: 6196
Product Name: Nature Walk Touch & Learn Wooden Walker™
Responsible Party: LeapFrog Enterprises, Inc.
Address: 2200 Powell Street, Suite 500, Emeryville, CA 94608
Website: leapfrog.com
FCC Statement: THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Support and Warranty
If a problem persists, contact LeapFrog Consumer Services at 1-800-701-5327 (U.S. and Canada) or email support@leapfrog.com. LeapFrog Enterprises, Inc. is committed to product accuracy and stands behind its products. Contact LeapFrog with any problems or suggestions; a service representative will assist you.
Visit LeapFrog websites for more product information, downloads, and resources:
Read the complete warranty policy online at leapfrog.com/legal.
A subsidiary of VTech Holdings Limited. © 2024 LeapFrog Enterprises, Inc. All rights reserved.