Instruction Manual for CMTECK models including: AS16 Microphone Boom Arm, AS16, Microphone Boom Arm, Boom Arm
CMTECK Microphone Boom Arm, 2 Extended Risers, Premium Low Profile Microphone with Cable Management, 360° Rotatable Boom Arm, Sturdy Aluminum Mic Desk for Blue Yeti Shure (Grey) : Musical Instruments
There are two hidden channel designed on the boom arm. Connect your microphone cable to the mic, tuck the microphone cable into the hidden channel, and then.
File Info : application/pdf, 1 Pages, 1.86MB
DocumentDocumentwww.cmteck.com suppo @cmteck.com AS16 BOOM ARM is engineered to elevate your microphone setup to studio-grade quality, crafted to blend seamlessly into your space while o ering unparalleled functionality. Simply attach your mic and let your voice take center stage. AS16 SETTING UP BOOM ARM Register today 3 minutes to register your 2 years extended warranty Please email us at vip@cmteck.com Title your email: Warranty& Order ID or send your order screenshot (Order ID should be XXX-XXXXXXX-XXXXXXX ) TECHNICAL SPECIFICATIONS Boom Type: Tube-style Max Weight Hold: 4.4lbs Threading: Standard 3/8" threading, with 3/8" to 5/8" adapter 3/8" to 1/4" and a xed Cable Management: Hidden-channel cable management Max Horizontal Reach: 730mm Boom arm Extension riser(150mm) Extension riser(75mm) C-clamp Ball head 6mm hex key wrench 3mm hex key wrench 3/8" to 5/8" adapter 3/8" to 1/4" adapter Locking nut Microphone clip Cable ties STEP1: MOUNT THE BOOM ARM TO YOUR DESKTOP Unscrew the C-clamp and glide it along the edge of your desktop, ensuring that both the upper and lower su aces of the C-clamp are rmly seated on at su aces. Avoid using su aces with excessively rounded or overhanging edges for mounting. Tighten the lower section of the C-clamp until it is securely fastened. 10-60mm STEP2: INSERT THE BOOM ARM INTO THE C-CLAMP Lower the boom arm into the C-clamp, ensuring a secure t and smooth rotation in both directions. STEP3: CONNECTING A MICROPHONE The thread on the Ball Head of the boom arm is US standard female 3/8". If your microphone has a 3/8" female thread on the bottom, you can use it with a direct connection. · Additional adapters (3/8" to 5/8" adapter, 3/8" to 1/4" adapter and microphone clip) are provided for connecting your devices. USING THE EXTENSION RISERS We have equipped this boom arm with two extension risers. Adjust the height as needed by utilizing the extension risers based on your usage scenario. Secure the bracket in place by using a hex screwdriver. Locking nut 3/8" to 5/8" adapter 3/8" to 1/4" adapter Microphone clip STEP4: ADJUSTABLE JOINT DAMPING After the microphone is securely attached to the AS-16 boom arm position the microphone to its desired location. ·Rotate the screw clockwise to increase the tension of the internal springs--which may be necessa for heavier devices. STEP5: CABLE MANAGEMENT There are two hidden channel designed on the boom arm. Connect your microphone cable to the mic, tuck the microphone cable into the hidden channel, and then secure it.