Current USA Aquatic Vita APP Support
Installation Guide for current models including: ColorPLUS, Smart LED Light, ColorPLUS Smart LED Light
ColorPLUS Smart LED Light SERENE AquaticVita app Current USA, Inc. www.current-usa.com Current USA, Inc. 2640 Business Park DDr. Vista, CA 92081 760-727-7011
File Info : application/pdf, 2 Pages, 1.22MB
DocumentDocumentREAD AND FOLLOW ALL SAFETY INSTRUCTIONS 1. Never attempt repairs yourself, return the device to an authorized repair facility for service or discard. 2. Carefully examine light after installation and BEFORE plugging it into the GFCI wall outlet. Be sure there is NO water or moisture on the light. 3. Never plug in a wet cord. If a plugged in light or socket does get wet, DO NOT TOUCH IT. Instead, promptly disconnect the fuse or circuit breaker that supplies power to the light. 4. Never operate a light that is damaged or malfunctioning, discontinue use immediately and return or discard. 5. This is NOT a toy. Close supervision is required when any appliance is used by or near children. 6. Always unplug fixture when not in use, before putting on or taking off parts, and before cleaning. Never pull the cord to unplug from GFCI. 7. Do not use this light for anything other than its intended use. 8. Ensure light is securely installed before supplying power to the unit. 9. Do not use with an extension cord. 10. Do not look directly into the LEDs. Risk of Electric Shock. Plug device ONLY into to a GFCI protected receptacle. If one is not provided, contact a certified electrician for proper installation. For more information, see the VITA App User Guide at www.aquaticvita.com or visit www.current-usa.com Drip Loops should always be used to help prevent water from traveling along the cord and coming into contact with an electrical outlet. Drip loops must always be below the level of the outlet. GFCI Protected AC Outlet If the plug or outlet does get wet, DO NOT TOUCH the cord. Ensure use of drip loop for all cables Disconnect the fuse or circuit breaker that supplies power. GROUNDING INSTRUCTIONS This LED system must be powered with the supplied UL/cUL Listed power supply. To avoid possible electric shock, power supply must be plugged into a GFCI wall outlet that is installed and grounded in accordance with all appropriate codes and ordinances. LIMITED WARRANTY Current USA, Inc. warrants this product against defects in materials and workmanship of a period of ONE (1) YEAR from the date of original retail purchase and is not transferable. Warranty on all Products, including Aquariums, is limited to replacement of the product and does not cover fish loss, personal injury, property loss or direct, incidental or consequential damage arising to the use of this product. Note: Current-USA, Inc. One-Year Limited Warranty does not cover damage caused by the following: improper installation, saltwater corrosion, electrical surges, or modifications. This warranty does not apply if the product has been damaged by accident, abuse, misuse or misapplication or if the product has been modified without the written permission of Current-USA, Inc.; or if any Current-USA, Inc. logos have been removed or defaced. THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. CURRENT USA, INC. SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, AND ANY COSTS OF RECOVERING ANIMALS, PLANTS, TANKS OR OTHER AQUARIUM RELATED ITEMS AND/ OR EQUIPMENT. CURRENT USA, INC. IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR REPLACEMENT OF EQUIPMENT OR PROPERTY, OR ANY COSTS OF RECOVERING OR REPRODUCING ANY EQUIPMENT, ANIMALS OR PLANTS USED OR GROWN WITH CURRENT USA, INC. PRODUCTS. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or exclusions of implied warranties, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary form jurisdiction to jurisdiction. Current USA, Inc. www.current-usa.com SERENE ColorPLUS+ Smart LED Light AquaticVita app This device Contains Transmitter Module FCC ID:2ANDL-CB3S IC: 23243-CB3S Current USA, Inc. 2640 Business Park DDr. Vista, CA 92081 760-727-7011 Models: 9050, 9051, 9052 Download the Aquatic VITA app on your smart device AquaticVITA app Install LED Light - Slide adjustable docking legs on each side of light fixture to match the length of your aquarium. - Connect the 3-pin plug on the light fixture to the matching 3-pin plug on the LED controller, - Connect the male DC plug from the power supply to the LED controller. - Plug power supply into a GFCI protected AC outlet ensuring a drip loop is in place. Adjust docking mounts to fit aquarium 12V DC Power Supply GFCI Protected AC Outlet LED Controller Ensure use of drip loop for all cables - Place fixture over glass top of aquarium and adjust docking mounts as needed to fit tank. You are now ready to use the LED light via the inline LED controller. To activate smart mobile app features, proceed to steps 4 & 5. When in Smart Wi-Fi pairing mode, the LED light will blink. Note: the light will stop blinking after 3 minutes or when controlled via the inline controller. LED Controller Button: WARNING: LED Controller is NOT waterproof. Keep in a dry place away from dripping water or where it may drop into water. Main control features: - Press once (1x) to turn ON, light will display default White color spectrum (all colors 100%). - Press and hold button 3 seconds to turn light OFF. *To reset controller for pairing with the Vita app and mobile device, press and hold button for 9 seconds - LED light will blink red when ready for pairing and connection. Manual Scene control: - Press 2x to display Sunrise fade scene. - Press 3x to display Sunrise fade scene. - Press 4x to display Moonlight fade scene. - Press 5x to display Rainstorm scene. - Press 6x to display Partly Cloudy scene. - Press 7x to display Sunset scene. - press 8x to display Glow scene. - Press 9x to display Stream scene. - Press 10x to display Deepwater scene. Launch and use the Aquatic VITA app to complete the set up. - Open the VITA app. - Complete the requested information to create a new account, or sign into your existing account. Tap Add Device or the + sign, then select "ColorPlus Aquarium LED" and confirm. Then enter your Wi-Fi network & password. Light must be rapidly VITA blinking to connect. If not already blinking, press and hold the button on the controller for nine seconds to put light in pairing mode. LED controller will then pair with your mobile device (this can take 30-60 seconds). (OPTIONAL) Connect to Alexa or Google Assistant using the in App guide Tap the EDIT icon. For more information, check the App User Guide at www.aquaticvita.com for help. Or email us at info@current-usa.com