ATTOP F16 User Manual

Specifications

DRONE

DRONE BATTERY

BATTERY CHARGER

CONTROLLER

CAMERA

Remote Control Function Description

The remote control features several buttons and joysticks for operating the drone:

• Short press button: One key return (effective in GPS mode).
• Long press button: Headless mode activation.
• Short press button: Speed switch (Gear 1, 2, 3).
• Long press button: Obstacle avoidance activation (Indoor mode only).
• Throttle lever: Controls ascent and descent.
• Long press button: Switches between Indoor and GPS modes.
• Camera steering angle buttons: Adjusts the camera's up/down angle.
• Steering rod: Controls drone movement (forward, backward, left, right).
• One key takeoff / landing button: Initiates automatic takeoff or landing.
• Long press button: Emergency stop.
• Short press button: Calibrates the gyroscope.
• Long press button: Calibrates the geomagnetism.

Note: The remote control automatically adjusts frequency. Calibrate gyroscope and geomagnetism before flight for stability. Default mode is GPS; switch to Indoor mode manually for indoor flying.

Remote Control Display Screen Function Description

The remote control display shows various flight information:

• Number of satellites: Indicates GPS signal strength.
• Signal: Shows remote control signal strength.
• GPS mode switch: Displays current GPS mode (ON/OFF).
• Photo/Video indicators: Show camera status.
• Remote control power: Battery level of the remote.
• Drone power: Battery level of the drone.
• Unlock the Drone motor icon: Shows motor status (1 for locked, 2 for unlocked).
• Height display: Shows current flight altitude.
• Distance display: Shows flight distance from the takeoff point.
• Headless mode indicator: Shows if headless mode is active.
• One key return indicator: Shows if RTH is active.
• Speed indicators: High speed / Low speed.

Remote Control and Aircraft Battery Installation and Charging Instructions

1. Remote Control Battery Installing

Insert three AA batteries into the remote control's battery compartment, ensuring correct polarity (+/-) as indicated.

2. Drone Battery Charging

1. Remove the battery from the aircraft.
2. Connect the drone battery to the provided charging cable.
3. Plug the USB charging cable into a USB power supply (5V, >=2A recommended).
4. The indicator light on the charger will be on while charging and turn off upon completion.

Note: Use a power supply with standard output voltage 5V and current greater than or equal to 2A to avoid overloading the cable and battery. Flight time is approximately 15 minutes, charging time is approximately 120 minutes.

3. Installation and Startup of Aircraft Battery

Insert the fully charged battery into the drone's battery slot and press and hold the power switch until the aircraft lights up.

Aircraft Installing

1. Folding

The drone can be folded for portability. The arms fold inwards towards the body.

2. Installation of Aircraft Blades

Install the propellers onto the correct motor arms, matching the propeller marks (A/B) with the corresponding arm marks. Secure them with screws.

Remote Control Setup

1. Mobile Phone Rack

Extend the mobile phone holder from the remote control and clamp your smartphone securely.

2. Grip Installing

Attach the controller grips to the designated positions on the remote control for a better grip.

3. Pairing

Turn on the aircraft and place it on a flat surface. The aircraft indicator lights will flash. Then, turn on the remote control. The drone and remote control will pair automatically. Pairing is successful when the remote control emits a "beep" sound after 2-3 seconds.

Note: GPS mode is default. Indoor mode cannot be selected if GPS signal is detected.

4. Gyroscope Calibration

Before flight, calibrate the gyroscope. Briefly press the gyroscope calibration button on the remote. The aircraft indicator lights will flash, indicating calibration is in progress. Calibration is complete when the lights stop flashing.

5. Geomagnetic Calibration

After gyroscope calibration, press and hold the gyroscope/geomagnetic calibration button for 2 seconds. The aircraft's tail light will flash, indicating geomagnetic calibration. Rotate the aircraft horizontally 3-5 circles. After a "beep" sound from the remote, rotate the aircraft vertically. Another "beep...." sound confirms successful calibration.

6. One Key Takeoff / Landing

GPS Mode: After acquiring at least 12 GPS signals, push the left stick to the bottom-left corner and the right stick to the bottom-right corner. The motors will start rotating. Press the one-key takeoff button to lift off.

Indoor Mode: After pairing, long press the Indoor mode button to switch from GPS mode (screen shows "GPS OFF"). Then, push the left stick to the bottom-left corner and the right stick to the bottom-right corner. The motors will start rotating. Press the one-key takeoff button to lift off.

Emergency Stop: Long press the one-key takeoff/landing button to activate an emergency stop if the drone is at an altitude not higher than 2m.

Notes:

• In GPS mode, one-key landing is available when altitude is below 10m and flight distance is less than 5m.
• The drone powers off automatically after 8 minutes of inactivity.
• The remote control powers off automatically after 20 minutes of inactivity.

Safety Reminder: Stay away from rotating propellers and motors.

Controller Joystick Operations

Throttle (left joystick)

Pushing the left joystick up increases altitude (ascend), pulling it down decreases altitude (descend).

Rotation (left joystick)

Pushing the left joystick left rotates the drone counter-clockwise, pushing it right rotates it clockwise.

Forward and Backward (right joystick)

Pushing the right joystick forward moves the drone forward, pulling it backward moves it backward.

Left and Right Side Flight (right joystick)

Pushing the right joystick left moves the drone to the left, pushing it right moves it to the right.

Headless Mode (Only Indoor mode)

In headless mode, the drone's orientation is disregarded. The forward direction is determined by the direction the drone's camera is facing when pairing is completed. This mode is only available in Indoor mode.

Direction Definition Before Take-off: Position the drone with its camera facing forward. Turn on the remote control and complete the 2.4G frequency pairing. This sets the forward direction for the flight.

Activating Headless Mode During Flight: Press the headless mode button. The remote control will emit a continuous sound, and the aircraft lights will flash rapidly. To exit headless mode, press the button again; the remote control will emit a "beep" sound.

Notes:

• Headless mode cannot be activated in GPS mode.
• Ensure the drone's forward direction is correctly set before activating headless mode.

Speed Switch

Short press: Cycles through speed gears. Gear 1 is the default. Two beeps indicate Gear 2, three beeps indicate Gear 3. One beep returns to Gear 1.

Note: Gear 1 is the only available speed in indoor mode. Beginners are advised to start with Gear 1.

Camera Pitch Control

Use the remote control's steering gear control key to adjust the camera's shooting angle:

• Press the camera lens electric up button to slowly move the camera angle upwards. Release to stop.
• Press the camera lens electric down button to slowly move the camera angle downwards. Release to stop.

Caution: Do not touch the gimbal.

Obstacle Avoidance Mode (Only for Indoor mode)

This function activates automatically when the drone is in indoor mode. Ensure at least 3 meters of clear space around the drone before takeoff.

When activated, the aircraft indicator flashes slowly, flight speed reduces, and the drone emits a "beep" alarm sound when approaching obstacles. It will hover at a safe distance to ensure flight safety.

The drone detects obstacles within approximately 1.5 meters.

One Key Return to Home (RTH)

The Return to Home function brings the drone back to its takeoff point (Home Point).

Failsafe RTH

If the remote control signal is lost during flight, the remote control will emit a "beep" alarm sound, and the drone will automatically initiate the return procedure. You can exit Failsafe RTH by pressing the "Return to Home" button or pushing the Throttle Joystick if the controller signal is recovered.

Warning: During Failsafe Return, the drone cannot avoid obstacles.

Low Voltage RTH

When the low voltage symbol appears on the controller screen, First Low Voltage RTH is triggered, accompanied by a "beep" alarm. The drone returns automatically under these conditions:

• Condition A: If flight distance exceeds 20m, the drone enters an electronic fence (20m altitude x 20m distance) and maintains its current distance before exiting RTH. If distance is exactly 20m, it stays at current distance and exits RTH.
• Condition B: If flight altitude is higher than 20m, the drone maintains its current height and enters the electronic fence (20m altitude x 20m) before exiting RTH. If altitude is lower than 20m, it ascends to 20m and enters the fence before exiting RTH.

Notes for First Low Voltage RTH:

• If flight altitude is below 40m, the drone ascends to 40m, flies back, and descends to 20m.
• If flight altitude is above 40m, the drone maintains current altitude, flies back, and descends to 20m.

When the drone's lights flash rapidly and a specific symbol appears, along with a "beep-beep" alarm, Second Low Voltage RTH is triggered, and the drone returns automatically.

Notes for Second Low Voltage RTH:

• Drone cannot ascend or descend; the right joystick can be used to adjust landing position.
• The drone cannot avoid obstacles.

Problem Solving Guidelines

Note: Batteries in newly purchased products may have low voltage; please charge them before use.

Disclaimer

Please read this manual carefully before using the product. This product is not recommended for people under the age of 14. By using this product, you agree to this disclaimer and acknowledge you have read it fully. You are responsible for your conduct and any damage caused while using this product. Use this product only for proper purposes and in accordance with local regulations, terms, and applicable policies and guidelines ATTOP may provide.

Wi-Fi Connection Instructions

Downloading App

Scan the QR code provided to download the "G07 Drone" application from the App Store™ or Google™ Play Store. Required Operating Systems: iOS v8.0 and later / Android v4.3 and later. Tip: Use a smartphone that supports 2.4G and 5G WiFi signals.

Connecting to Wi-Fi

1. Connect your smartphone to the Wi-Fi network created by the drone. Check the drone's status in the "G07 Drone" app.
2. Your smartphone will search for available Wi-Fi hotspots.
3. Select the Wi-Fi network named "F16-XXXXXX".
4. Wait for your smartphone to connect to the drone's Wi-Fi hotspot. This is usually indicated by a Wi-Fi logo on your smartphone's screen.
5. Select the F16 drone in the app and click "Start" to access the interface.

APP Operation Instruction

Operation Interface

The app interface displays various flight information and controls:

• Top Bar Indicators:
• 1: Home page
• 2: Flight height
• 3: Flight distance
• 4: Vertical speed
• 5: Horizontal speed
• 6: GPS signal strength
• 7: Wi-Fi signal strength
• 8: Drone battery power
• 9: Settings
• Main Control Area:
• A: More functions menu
• B: One key takeoff/landing
• C: Return to Home (RTH)
• D: Live map view
• E: Photo/Video mode selection
• F: Shutter button (take photo)
• G: Media gallery (view photos/videos)
• H: Unlock drone motors
• I: Follow Me mode
• J: Waypoints flight
• K: Point of Interest (POI) mode
• L: Flip image
• M: VR mode
• N: Gestures Photo/Video
• O: Music control

Follow Me (In GPS mode)

The Follow Me function can be activated when the distance between the player and drone is 5m-20m.

1. Tap the "Follow Me" icon on the app interface to enter the mode.
2. To exit Follow Me Mode, tap the "Follow Me" icon again or push the right joystick. The drone will stop following and hover.
3. The Home point cannot be changed after canceling Follow Me mode.

Note: Follow Me function cannot be activated when the drone battery is low.

Waypoint Flight

It is recommended to enlarge the map to use Waypoint flight effectively.

1. Tap the "Waypoint" icon on the app interface to enter the function.
2. Draw a line on the map to create a path (maximum 20 paths). Tap the "Start" icon to make the drone fly along the created path.
3. Tap the "Deduct" icon to remove all paths.
4. Tap the "Navigation" icon.
5. Tap the "Drone Location" icon.
6. The drone will not fly back to the starting point after executing a flight path.
7. If a flight path fails, delete all paths and try again.

Exit Waypoint flight mode by clicking the live transmission image.

Notes:

• Waypoint flight function cannot be activated when the drone battery is low.
• DO NOT fly the drone towards people, animals, small/fine objects (e.g., tree branches, power lines), or transparent objects (e.g., glass, water).
• There may be slight deviations between the expected and actual flight path.

Point of Interest (In GPS mode)

The drone will fly in a circle around a designated point of interest (radius approx 5m).

1. Tap the "Point of Interest" icon on the app interface to enter the function.
2. To exit Point of Interest mode, tap the icon again or push the right joystick in any direction.

Note: Point of Interest function cannot be activated when the drone battery is low.

Gesture Control (In GPS mode / In indoor mode)

Activate gesture functions by keeping a distance of approximately 2m from the drone and tapping the designated icon on the app interface:

• Tap to activate take photo.
• Tap to activate video recording or cancel video.

Setting

Tap the "Settings" icon to configure your drone:

• Gyro Calibration: Place the drone on a flat surface and tap "Calibrate" to calibrate the gyro.
• Compass Calibration: Tap "Calibrate" to calibrate the compass.
• Tap to check the flight logs.
• Tap to check the last recorded location of the drone.

Manufacturer Information

Guangdong Attop Technology Co., Ltd.

Linghai Industry Zone, Laimei Road, Chenghai District, Shantou, Guangdong, China.

Website: www.attoptoys.com

Customer Service Email: attop@afterservice.vip

Warranty Information

30-Day Whole Unit Warranty For Quality-Related Issue

For 30 days after the date of purchase, ATTOP covers all quality-related issues with a replacement. Ensure the drone is operated as directed.

90-Day Accessories Warranty For Any Reason

For 90 days after the date of purchase, ATTOP covers all accessories quality-related issues with an accessory replacement. Ensure the drone is maintained as directed.