Z68 Pro Open Wireless Headset

User Manual and Specifications

Product Specifications

Wireless Version: v5.4
Music Time: 6 hours
Call Time: 6 hours
Standby Time: Approximately 800 hours
Communication Distance (barrier-free): 10-15 meters
Headphone Charging Time: Approximately 1 hour
Charging Case Charging Time: Approximately 1.5 hours
Headphone Battery Capacity: 50mAh
Charging Case Battery Capacity: 200mAh
Wireless Support Protocols: HFP, A2DP, HSP, AVRCP

Product Functional Diagram Description

The functional diagram illustrates the open wireless headset, highlighting key components:

Vocal Cavity: The part that directs sound to the ear.
Touch Area: The surface on the earbud used for controls.
Indicator Light: Shows charging status and pairing mode.
Microphone Hole: For voice input during calls.

Pairing & Reconnection

Remove both earbuds from the charging case. They will automatically power on and pair with each other. The auxiliary earbud's indicator light will turn off, and the main earbud's light will flash white and orange, indicating it's ready to pair with a device.
On your smartphone or device, open the Bluetooth settings. Search for available devices and select "BT" to connect. The main earbud's indicator light will turn off upon a successful connection.
The headset has a memory function and will automatically reconnect to the last paired device when powered on and within range.

Touch Controls

Power On: Long press the touch button for 2 seconds or remove earbuds from the charging case.
Power Off: Long press the touch button for 5 seconds or place earbuds back into the charging case.
Play/Pause: Single click the touch button on either earbud.
Next Song: Double-click the touch button on the main earbud.
Previous Song: Double-click the touch button on both earbuds simultaneously.
Volume Up: Triple-click the touch button on the main earbud.
Volume Down: Triple-click the touch button on the auxiliary earbud.
Answer/End Call: Single click the touch button on either earbud.
Reject Call: Long press the touch button for 2 seconds on either earbud.
Wake up Siri: Long press the touch button on either earbud for 3 seconds.
Cancel Siri: Single click the touch button on either earbud while Siri is active.

Headset Charging

Low Battery Alert: The headset will provide an audio prompt when the battery is low.

Place the earbuds back into the charging case to charge. Ensure they are seated correctly.
The charging indicator lights on the earbuds are orange while charging and turn off when fully charged.

Charging Case Charging

When the charging case display shows less than 10% battery, connect a Type-C charging cable to charge the case.

Safety Precautions and Requirements

Keep away from high temperature, high humidity, and corrosive environments.
Protect the product from impact, drops, bending, or soaking.
Do not disassemble the earbuds or charging case.
Avoid overcharging, as it can reduce the product's lifespan.
Use a certified DC 5V-1A adapter for charging.

Battery performance may decrease over time with repeated charging and discharging, which is normal for rechargeable electronic products.

FCC Compliance Information

FCC Caution:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. It can be used in portable exposure conditions without restriction.