AtGames Legends Pinball Micro Instruction Manual

Introduction

This manual provides instructions for the AtGames Legends Pinball Micro (ALP Micro). The product is intended for indoor, home use only and not for commercial settings.

This product features games from TAITO Corporation, including titles like ARKANOID™, BUBBLE BOBBLE™, DARIUS™, FRONT LINE™, RAINBOW ISLANDS™, RASTAN SAGA™, SPACE INVADERS™, and THE LEGENDS OF KAGE™.

Index

• Assembly Guide: Page 4
• Packaging/Unboxing Warning: Page 7
• Controls & Inputs: Page 8
• Quick Start Guide/How to Update Firmware: Page 9
• How to Register/Sign In Your Legends Account: Page 10
• Product Registration/Safe Power Off/Warranty Info: Page 11
• Game List: Page 12
• Warning/FCC Statement/Safety Notice: Page 13

Assembly Guide

Tools Included: A Philips head screwdriver.

Parts:

• Screws: S1 x3, S2 x3
• Cables: M AC adapter
• Components: Backglass (B), Playfield

Assembly Steps:

1. Use the included Philips head screwdriver to open the back panel on the Backglass.
2. Insert [S2] Dowels into the matching holes on top of the Playfield.
3. Feed the video and audio cables through the hole on the back of the Backglass, and attach the Backglass to the top of the Playfield using the dowels.
4. Insert 2 [S1] screws into the matching holes and tighten them.
5. Connect the video and audio cables to the matching slots.
6. Attach the back cover of the backglass and tighten it with the included Philips head screwdriver.

Packaging/Unboxing Warning

Please note that when assembling the machine, the top rear opening on the backglass is for connecting to the secondary monitor. Due to the weight of the cabinet body, do not carry the cabinet body by grabbing this opening. This can cause serious damage to both the body and electronics inside.

Exercise extra caution when moving the cabinet body and backglass to ensure a safe out-of-the-box experience. Be careful when removing components from the packaging to avoid damage.

Controls & Inputs

Front/Top Controls:

• Plunger Button
• AtGames/Home Button
• HDMI Indicator
• Cabinet Indicator
• Channel Volume +/- Buttons

Rear Controls/Ports:

• Power Switch
• HDMI Port
• Ethernet Input
• Power Input
• Left USB Port: For additional storage (USB flash drive not included).
• Right USB Port: For OTG (on-the-go) connectivity.

Quick Start Guide & Firmware Updates

Quick Start:

1. Plug in the AC adapter and press the power button on the back of the cabinet to turn it on.

2. Use the D-pad to select from the pre-loaded games.

3. Connect to the internet via the Ethernet port (cable not included) or WiFi to receive system updates and access more games on ArcadeNet™.

Connecting to Wi-Fi:

1. Select [Wi-Fi] in the [Settings] menu.
2. Select your Wi-Fi network SSID and choose [Connect].
3. Enter the Wi-Fi password using the on-screen keyboard and select [Submit].

How to Update Firmware:

1. Ensure the ALP Micro is powered on and connected to the internet (Ethernet or Wi-Fi).

2. Navigate to [Settings] and select [Version].

3. If a newer software version is available, follow the on-screen instructions to download it.

4. Ensure the internet connection remains stable during the download.

5. Once the software is installed, select [Upgrade]. The device will restart automatically to activate the new version.

Note: If you encounter issues during the firmware update, contact support at: https://arcades.atgames.net/contact/

How to Register/Sign In Your Legends Account

1. Ensure your device is connected via Wi-Fi or Ethernet. Go to [Settings] and select [SIGN IN].

2. Create a new account if you do not have one.

3. To sign in, you can use your Legends ID and password, or sign in via QR code.

4. QR Code Sign-In: A smartphone or tablet is required. Scan the QR code on the screen to launch the ArcadeNet™ website. You will be directed to the login page where you can sign in with an existing Google/Facebook account or your email.

5. A success message ("Success!") will appear on the arcade once signed in.

Product Registration, Safe Power Off, and Warranty Info

Product Registration:

Use your Legends account login to register your product. If you created a new account, follow instructions in the product registration email. If you have an existing account, log into the ArcadeNet™ website, go to My Account, and select Registration to view your new device.

When to Safely Power Off the ALP Micro:

Do not power off the ALP Micro during the following operations:

• Firmware update
• Factory reset
• Data cleanup
• USB drive read/write operations

Powering off during these processes could lead to irreversible data loss and/or damage to your cabinet and USB drives.

Warranty Info:

AtGames warrants this product against defects in materials and workmanship under normal residential use for ninety (90) days from the original invoice date. Shipping and handling fees are the customer's responsibility.

To make a warranty claim, submit a service request at: https://www.atgames.net/arcades/contact/

Standard warranty coverage is void due to misuse, improper maintenance, self-repair, tampering, or invasive hardware modifications.

Warranty services are valid with a receipt from an authorized retailer. Purchases through third-party sellers or resellers are not covered under the standard warranty program; contact the seller for support.

Game List

The AtGames Legends Pinball Micro includes a variety of games:

• Aerobatics
• Aerobatics Retro
• Arkanoid
• Battle
• Battle 2016
• Battle Deluxe
• Battle Retro
• Beast Master
• Blackbelt
• Blackbelt Retro
• Blackbelt2018
• Bubble Bobble™
• Caveman
• Cine Star
• Cine Star Deluxe
• Circus
• Circus 2017
• Circus Retro
• Darius™
• Devil Riders
• Devil Riders 2019
• Devil Riders Retro
• Farfalla Deluxe
• Firefighter
• Front Line™
• House of Diamonds Deluxe
• Lucky Fruit
• Pool Champion Deluxe
• Rainbow Islands™
• Rastan Saga™
• Red Show Deluxe
• Robot Deluxe
• Space Invaders™
• Spooky Deluxe
• Strike Deluxe
• The Legends of Kage™
• Time Machine
• Time Machine 2019
• Time Machine Retro
• Tropical
• Tropical 2019
• Universe
• Universe Deluxe
• Universe Retro
• Winter Sports
• Winter Sports 2018
• Wizard
• Zankor
• Zankor 2017
• Zankor Retro

Game titles and copyrights are attributed to TAITO CORPORATION and/or their respective owners.

Warnings, FCC Statement, and Safety Notices

General Warning:

Adult assembly is required. Keep small parts out of reach of children until assembly is complete due to the presence of small parts during assembly.

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. There is no guarantee interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Modifications not expressly approved by the manufacturer could void your authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For Game Host: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Safety Notice:

• Do not immerse the machine in water or expose it to high heat or strong magnetic fields. This could cause permanent damage.
• Always use a dry towel to clean the cabinet and control top.
• Transformers are suitable for indoor use only. Transformers and power supplies for toys are not intended to be used as toys, and their use by children shall be under the full supervision of parents.

ISED Statement (Canada):

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).

This device meets the exemption from routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure. Users can obtain Canadian information on RF exposure and compliance.

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Note: 5GHz band (W52): Indoor use only.

Contact and Additional Information

For the most updated product information, visit: www.atgames.us

For customer service, warranty info, and technical support, please visit: https://www.atgames.net/arcades/contact/

© 2022 AtGames Interactive. PO Box 1691, El Segundo, CA 90245.

All rights reserved.

*Content and images are for reference only and subject to change. Trademarks and images are the properties of their respective owners.