User Manual for TANGMAI models including: N6, 2A7GB-N6, 2A7GBN6, N6 Neckband Bluetooth 5.0 Headphones, Neckband Bluetooth 5.0 Headphones, Bluetooth 5.0 Headphones, Headphones
Shenzhen Jiechen Technology Co. LTD N6 Magnetic headphones with wire 2A7GB-N6 2A7GBN6 n6
N6 User Manual Manual before operating your device. In order to avoid unnecessary injuries, please do not Disassemble this product by yourself, and please use a standard charger. Product Contains N6 Bluetooth Neckband x1 USB Charging Cable x1 Product Specification Driver: 10mm Support Profile: HFP / AVRCP / A2DP Charging Time: Up to 60 minutes Working Voltage: 5V Standby time: 100 hours Playtime: Up to 50 hours (60% volume) Transmission Range: Up to 10m Working Temperature: -30°C - 70°C Wight: 28.5 g Large Ear Tips Medium Ear Small Ear Tips x2 Tips x2 x2 (on the Neckband) Power On Long press power button for 3 seconds, and the white light on 1 second. Power Off Long press power button for 5 seconds, and the red light on 1 second. Bluetooth Pairing When power off, long press the power button until the white and red light blinks alternatively indicating that N6 is in pairing mode.Turn on the Bluetooth on your cellphone or laptop and open the Bluetooth menu.Select"N6"and connect the device, the white and red light off when you connect the cellphone.The device will automatically turn off if not connected cellphone within 7 minutes. N6 Dual Pairing Connect your neckband with Device 1. Turn off the Bluetooth of Device 1, and connect neckband with Device 2. Turn on the Bluetooth of Device 1, both the devices will be paired to use. Product Control Play/Pause press once Previous Song Long press for - 2 seconds Next Song Long press + for 2 seconds Volume Up Short press + Volume Down Short press - Reset Long press + & - for 5 seconds to reset the earbuds press once Long press Long press Short press Short press Long press Answer a Call Short press the power button once End a Call Short press the power button once Voice Assistant Press the power button thrice Reject Call Long press the power button for 2 seconds Short press once Short press once Press thrice Long press for 2 seconds Product Charging Plug the USB type-C to charging the device. On charging mode, the red light on until charged finish. Once charged finish, the white light on. Warranty The warranty covers your device , including accessories against manufacturing defects for 1 year from the date of purchase. Which that are not covered in the warranty. Unauthorized tampering, modifications or repairs of the device. Physical damage of the device on the account of abuse, handling, storage, installation or testing including any use that is not in accordance with the product manual. Certification "This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation."FCC ID: 2A7GB-N6 Safety For You Do not expose device to liquids, moisture or humidity. It has electronics and a battery in it. Neither of them likes getting wet. Don't use abrasive cleaning solvents to clean your device. Wipe them down with a slightly damp cloth if and when necessary. Remove and clean the earbuds tips regularly, to ensure that you always enjoy the best sound possible from your device. Do not expose device to extremely high or low temperatures as this may damage the battery or even deform the plastic parts. Don't throw yours device in a fire to dispose it. The internal battery may explode. Don't try to disassemble your device. There are no user serviceable parts inside it. Try not to drop your device and keep it away from sharp objects such as keys in your pockets. Only charge your device from 5V USB ports such as phone chargers and laptops or PCs. Never listen to music at high volumes or you may permanently damage your hearing. Pay attention to your surroundings and never wear any headphones while riding, driving or walking in traffic. You do not come with any warranty. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is co nnected. · Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modi cations to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition, compliance with exposure requirements.Adobe PDF library 15.00 Adobe Illustrator(R) 17.0