Instruction Manual for FIBERROAD models including: FR-9T448F, FR-9T44F8, FR-9T4424P, FR-9T4400 10G Managed Chassis 28 Ports Industrial Ethernet Switch, 10G Managed Chassis 28 Ports Industrial Ethernet Switch, Chassis 28 Ports Industrial Ethernet Switch, 28 Ports Industrial Ethernet Switch, Industrial Ethernet Switch, Ethernet Switch, Switch
FR-9T448F - FR-9T44F8 - FR-9T4424P - DAVANTEL
FR-9T4400 10G Managed Chassis Series L3 Managed 10/100/1000Based & 10G, 28 ports Industrial Ethernet Switch Brief introduction Industrial grade L3 core layer switch is a layer 3 network management Ethernet Switch independently developed by Fiberroad that is positioned at the convergence layer and core layer applications. It is a large-port and high-specification product in the industrial control field. This product adopts the industry's leading Technical standards, can provide stable and reliable Ethernet transmission, with high-quality design and reliability. It can provide users with high-efficiency bandwidth and reliable optical fiber network solutions for Ethernet data exchange, convergence and remote optical transmission. The product has the characteristics of no fan, low power consumption, high reliability, good stability, and easy maintenance. Industrial Ethernet Switch adopt mature technology and open network standards, adapt to low temperature and high temperature, strong anti-electromagnetic interference, anti-salt fog, anti-vibration and anti-shake, equipped with redundant dual power supply (AC/DC), which can offer redundant mechanisms for critical applications that need always-on connections. It can also operate either at standard operating temperature range -40 to 75°C. Industrial switches support standard 19" rack mounts with IP40 protection and are perfect choices for harsh environments, such as industrial networking, intelligent transportation systems (ITS) and are also suitable for many military and utility market applications where environmental conditions exceed commercial product specifications. Features > Cache up to 12Mbit for smooth transfer of 4K video > Support IEEE802.3/802.3u/802.3ab/802.3z/802.3x store and forward mode > Support large backplane bandwidth, large swap cache, ensure line-speed forwarding for all ports > Support ERPS ring network protocol of ITU G.8032 standard, self-healing time less than 20ms > Support STP/RSTP/MSTP protocol of international standard IEEE 802.3D/W/S > Redundant dual power supply DC or AC power supply specifications are optional, anti-reverse connection, overcurrent protection function > -40 ° C ~ 75 ° C wide temperature design to ensure that the equipment adapts to a variety of harsh on-site environments > IP40 grade protection, high strength metal case, fanless, low power design Specification Ethernet Standards Packet Buffer Maximum Frame MAC Address Forward Mode Switching Performance IEEE802.3 IEEE802.3u IEEE802.3z IEEE802.3ab IEEE802.3x IEEE802.3az IEEE802.3ah IEEE802.1X IEEE802.1Q 12Mbits 10K Bytes 16K Store-and-forward and pass-through (full/half duplex mode) Delay: < 7s Backplane bandwidth: 128Gbps Packet forwarding rate: 95.232M Transmission Distance SFP Port RJ45 Port Transmission Distance Power Information Working Voltage Overload Protection Power Reverse Power Consumption POE (optional) POE Standard POE Power POE Line Sequence Physical Characteristics Material Cooling Mode Dimensions Installation Mode Weight Environmental Requirements Operating Temperature Operating Humidity Depends on optical module 100musing standard CAT5/CAT5e cable DC15-56V/AC 100-240V 50-60HZ Yes Support Full load<30W IEEE 802.3af/atPSE Single port Maximum 30W 1/2(+)3/6(-)end-end bridging method Metallic aluminum alloy Natural cooling, no fan design 440mm*305mm*44mm 1U Chassis Installation 3.5kg -40~75 5%~90%no condensation Storage Temperature Protection MTBF Warranty Certification Standard EMI EMS Impact Drop Vibration Safety Level Layer 2 Function Redundant Network Multicast Support VLAN Link Aggregation QOS POE Management Diagnostic Maintenance Management Function Alarm Management Security -40~85 500,000 hours 5 years warranty, lifetime technical support FCC Part 15 B Class A, EN 55022 Class A EN61000-4-2(ESD), EN61000-4-3(RS), EN61000-4-4(EFT), EN61000-4-5(Surge), EN61000-4-6(CS), EN61000-4-8, EN61000-4-11 IEC60068-2-27 IEC60068-2-32 IEC60068-2-6 EN60950-1 Support STP/RSTPsupport EAPSERPS Support IGMP Snooping V1/V2/V3support GMRP Support IEEE 802.1Q 4K VLANsupport QINQ Support manual aggregationsupport static/dynamic LACP Support COSDSCP8 queuessupport WRRSPWFQQOS Support total power controlPOE on/ offport power sequencing, POE timing Support port mirroring, Syslog, Ping Support CLIWEBSNMPTelnet server for management Support 1 way relay alarm output, RMON, TRAP Support DHCP SnoopingOption 82802.1X security access, Support user hierarchical management, ACL access control list, Support DDOSport-based MAC filtering / binding, MAC whitelist Ordering information Port Management Layer 3 function Static routing function Routing function Login account Login IP User Name / Password Support port startup and disabling, support rate setting, Support 802.3x flow control, port name modification Routing function IPV4 / IPV6 static routing 1024 (IPv4), 512 (IPv6) RIP OSPF VRRP ARP ND full routing 192.168.1.6 Admin/admin *Note: The SFP model does not contain optical modules by default. If you find any shortage or damage, please contact us in time. Precautions To avoid damage to the equipment and personal injury caused by improper use, please observe the following precautions: > Keep the power off during installation, wear an anti-static wrist, and ensure that the anti-static wrist is in good contact with the skin to avoid potential safety hazards. > The switch can work normally under the correct power supply. Please confirm that the power supply voltage matches the voltage indicated by the switch. > Before powering on the switch, please make sure that the power circuit is not overloaded, so as not to affect the normal operation of the switch and even cause unnecessary damage. > To avoid the risk of electric shock, do not open the case while the switch is working, even if it is not charged, do not open it yourself. > Before cleaning the switch, pull out the power plug of the switch. Do not wipe with a wet cloth. Do not use liquid to clean it. > The equipment installed in the rack is generally from bottom to top to avoid overload installation. > Avoid placing other heavy objects on the surface of the switch to avoid accidents. Order Information FR-9T448F FR-9T44F8 FR-9T448F/16P 1U Rack, Layer 3 Managed Industrial Switch;4*10G SFP + 8*Gigabit COMBO(TP+SFP) + 16*10/100/1000M Base-TX, DC9-56V Redundant power (AC220V power supply option, FR-9T448FA) 1U Rack, Layer 3 Managed Industrial Switch;4*10G SFP+8*Gigabit COMBO(TP+SFP) +16*100/1000M Base-FX SFP, DC9-56V Redundant power (AC220V power supply optional, FR-9T44FA) 1U Rack, Layer 3 Managed Industrial Switch, 4*10G SFP + 8*Gigabit COMBO(TP+SFP) + 16*10/100/1000M Base-T 802.3AT PoE, DC48-56V Redundant power *Fiber port can add SFP module. RJ45 port with PoE optional.Microsoft PowerPoint 适用于 Microsoft 365