New Rheem Continuous Flow Gas Hot Water

Continuous Hot Water When You Need It

Continuous Flow gas water heaters deliver hot water that will never run out as they heat water when you need it, for as long as you need it. Continuous Flow water heaters work differently to storage water heaters, heating only on demand rather than heating and storing water until needed.

Choose the Right Capacity for Your Home

Your Rheem will be serving you for many years, so make sure you choose the right capacity to meet your needs now and as your family grows:

Rheem Offers More Models and Features with the Performance You Expect

• ⭐ 6 Star efficiency
• 10 Year Heat Exchanger warranty¹
• Sleek design, in modern, designer colours with concealed screws for a clean look (12L-26L)
• 50°C factory pre-set models available for greater safety, adjustable at installation for hotter water at the tap³
• Digital OK monitor: Displays error codes should a fault occur, and shows your set hot water temperature when operating (12L-26L).
• Compact (even better for small spaces)
• Improved hot water flow delivery at cold start-up (while also saving water)
• More flexible (installable in more places):
  • Just 2L/minute minimum operating water flow
  • Minimum water supply pressure 120kPa (27L: 140kPa)
  • Maximum water supply pressure 1,000kPa
• Rheem Flue Diverter compatible⁴: Stainless Steel diverters with heat shield for added safety. Standard (12L, 16L or 26L) or Extended Flue Diverters (26L).
• ? Flamesafe® overheat protection: automatically shuts down your water heater should it overheat.
• ? EZ Link® compatible: two units can be linked for up to 54L/min delivery.
• ⚙️ Q Factor® equipped: for hot water with minimal fluctuation when multiple taps demand hot water.
• Optional Remote Temperature Controllers: for convenience in setting the safest temperature.
• ☀️ Solar Ready: 70°C capable models in 20L, 26L or 27L capacity (when set to 70°C) are solar system compatible without the need for special fittings⁵.
• ❄️ Frost protected to -20°C.
• Internal model available with a matched flue system (27L only).
• Available in Natural Gas or Propane.

Remote Temperature Controllers Put You In Control

Rheem Standard and Deluxe Electronic Temperature Controllers allow you to choose the exact temperature you need. Bathroom Controllers can be set up to 50°C for added safety. Deluxe Controllers offer a 'bath fill' mode, turning off the water once your pre-set volume is delivered.

Recess Boxes and Pipe Covers

Recess Box: Your Rheem water heater can be neatly set into the wall to save even more space, using a recess box.

Pipe Cover: Alternatively, use a Rheem pipe cover in a matching colour to hide all pipework.

Rheem Continuous Flow Product Data

Diagram Descriptions:

RHEEM 12/16/20/26 Connections: Shows connections for Cold Water Inlet (R 3/4), Hot Water Outlet (R 3/4), Gas Inlet (R 3/4), and Power Lead Connection.

RHEEM 27 Connections: Shows connections for Cold Water Inlet (R 3/4), Hot Water Outlet (R 3/4), Gas Inlet (R 3/4), and Power Lead Connection.

RHEEM 27 INTERNAL Connections: Shows connections for Cold Water Inlet (R 3/4), Hot Water Outlet (R 3/4), Gas Inlet (R 3/4), and Power Lead Connection.

Certifications and Compliance

• The Australian Gas Association
• ISO 9001 Quality
• AS 3498
• WMKA21434

Warranty Information

Warranty conditions: 10 Years parts and 3 Years labour on Heat Exchanger, 3 Years parts and labour on other components when installed in a domestic dwelling. For all other installations, warranty period is 1 Year parts and labour on Heat Exchanger and other components. Conditions apply. See the Rheem warranty set out in the Owner's Guide & Installation Instructions or view at www.rheem.com.au/warranty.

Notes:

• ² Flow rate guide only, subject to ambient water temperature and pressure and correct pipe sizing.
• ³ 50°C factory pre-set models supply hot water at a maximum 50°C to all outlets in accordance with AS 3498. Some applications may require tempering, refer to AS/NZS 3500.4. 60°C and higher temperature models must have a tempering valve installed in accordance with AS/NZS 3500.4.
• ⁴ Confirm with local authorities that the installation complies with all applicable regulations. Refer to your State or Territory gazetted regulation revision of AS/NZS 5601-XXXX for compliance. Rheem Flue Diverters must only be fitted to models: 876812NF/874812NF/874T16NF/876T16NF/874T26NF/876T26NF. Fitting to other models may create an unsafe operating condition.
• ⁵ Gas solar boosters must be set to 70°C at installation and for operation to comply with applicable regulations.

Information current as at March 2018. Materials and data are subject to change without notice.