User Manual for Quin Technology models including: D30 Small Label Printer, Small Label Printer, Label Printer
Zhuhai Quin Technology Co., Ltd. D30 Small Label Printer 2ASRB-D30 2ASRBD30 d30
D30 Small Label Printer by Zhuhai Quyin
D30 Product Instruction Please read this Instruction carefully before using this product and keep it properly. 01 Packaging List Priter*1 Product Instruction*1 Data cable*1 02 Device Parameter Product Name Product model Printing technology Effective printing width Supported consumables Printing density Printing resolution Print head service life Communication interface Product Size Power Input Power Supply Method Small Label Printer D30 Thermal printing 12mm Black label paper/Interstitial paper Lightstandarddark 203dpi 50KM Bluetooth4.0 5.2*2.3*1.2in 5V 2A Micro USB Lithium battery Supported operating system Android ios 03 Component instruction 1.Appearance Introduction Power Button Indicator light Paper compartment cover Cover Buckle Decorative window Paper outlet Charging port Sling hole 2.Introduction of the function of the power button Operation method Functions Press and hold 2S Turn on/off Click Print out the paper Double click print the content of the self-test paper 3.Power indicator status Indicator light status Description Keep on normal status (printing) Green Flash slowly harging with power on Flash quickly charging with power on Red Keep on error (lack of paper, cover opened, high temperature) Flash slowly 10% battery Flash quickly 5% battery 04 Introduction of paper roll installation Please open the paper compartment cover Disassemble the label paper and put into the paper compartment Please pull out the paper out of the paper outlet 5mm Close the paper compartment cover and connect with the App to use 05.Search Print master on App Store or Google Play to Get the App 06 Product warranty Thank you for choosing the small label printer The free warranty period of this product is one year from the date of purchase (subject to the date of the official purchase invoice). Please keep the warranty card properly, which will not be reissued in case of loss Please keep the warranty card properly, which will not be reissued in case of loss 06 Non-warranty Regulations The warranty is void under the following conditions· Exceeding tuhe warranty period. Not presenting the original warranty/maintenance card Preasnting a damaged warranty /maintenance card ( e.g.tearing or tampering ) Damage caused by unauthorized repair,disassembling,etc. Damage cauasd by human error . Damage caused by naturel disasters such as earthqua kes ,floods,windstorms ,lightning strikes or externai disasters su ch as fires and houas collapsas . Failure o damage causad by harsh conditions (oil,moisture ,direct sunlight etc .)or failure to use or care for as outlined by the instruction menual . 07 FCC Caution Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment . This equipment has been tested and found to comply with the limits for Class B digital device ,pursuant to Part 15 of the FCC Rules .These limits are designed to provide reasonable protection against harmful interference in a residential installation .This equipment generates uses and can radiate radio frequency energy and ,if not installed and used in accordance with the instructions ,may cause harmful interference to radio communications .However ,there is no guarantee that interference will not occur in a particular installation .If this equipment does cause harmful interference to radio or television reception ,which can be determined by turning the equipment off and on ,the user is encouraged to try to correct the interference by one or more of the following measures : ----Reorient or relocate the receiving antenna . ----Increase the separation between the equipment and receiver . ----Connect the equipment into an outlet on a circuit different from that to which the receiver is connected . ----Consult the dealer or an experienced radio /TVtechnician for help This device complies with part 15 of the FCC rules .Operation is subject to the following two conditions (1)this device may not cause harmful interference ,and (2)this device must accept any interference received ,including interference that may cause undesired operation . 08Warranty /MaintenanceCard Replace Return Repair User Information Name : Gender: Phone : Address : Product Information Date of purchase : Product order number : Product serial number : Reason for Return(Replace/Repair/Request Malntenance ) Fault description : Maintenance Records : Fault conditions : Maintenance staff Processing situation : Repair date Repair ticket number : Date of inspection : FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. *RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used i n portable exposure condition without restriction.WPS 文字