光伏逆变器_太阳能并网逆变器-锦浪科技股份有限公司
User Manual for Solis models including: SOL-DLS-LAN Data Logger LAN Stick, SOL-DLS-LAN, Data Logger LAN Stick, Logger LAN Stick, LAN Stick
Solis SOL-DLS-LAN Datenlogger-Stick - LAN – MAXSEL
File Info : application/pdf, 1 Pages, 919.01KB
DocumentDocumentData Logger LAN Stick Quick User Guide DLS Version: 1.3 DeliveryContent 1 pc LAN Stick 1 pc Data Logger LAN Stick Quick User Guide Introduction Data Logger LAN Stick is mainly used in inverters to realize simple and quick access to Internet. Users can easily check device information by logging in the monitoring center. The communication topology is as shown below: 1 Electrical Connection Connect LAN Stick to the corresponding interface on the inverter. Solis-1P5K-4G is used as an example in this manual. Please perform relevant operations as indicated below: 2 LAN configuration Step 1: Enter 169.254.173.207 in the web browser, open the following configuration interface. (If you can't open it, please skip to 3) Enter username admin and password admin. 3 LAN configuration Step 1: With a network cable to connect the computer and LAN Stick, right-click the computer icon in the lower right corner of the computer, enter the network and sharing center. Step 4: Left double-click: "Internet Protocol version 4 (TCP / Ipv4). Step 6: Enter 10.10.100.254 in the web browser, open the following configuration interface. Select the "Network". 4 Create Solis monitoring account Step 1: Mobile phone scan the QR code to download the APP, or in the APP Store or Google Play search Solis Home or Solis Pro. 5 Create plant Step 1In the APP homepage and click "Build Your Plant Within 1 Minute!" in the middle of the screen. Or click the "+" in the upper right corner. + Data Logger LAN Stick Wireless Router Android iPhone PC Description of Symbols To ensure normal use of the datalogger, before using the datalogger, be sure that: a. The connected wireless router can normally access to Internet; b. The communication address of the inverter MUST BE "01", which is default value. c. A computer is connected to this device for parameter setting. Corresponding groove Data Logger LAN Stick Interface Data Logger LAN Stick Installation 1. Insert LAN Stick to COM port. 2. Fasten the LAN Stick. 1 2 Step 2: Select the local connection options. Step 2: Select the "Quick Set". Enter IP addressSubnet maskGateway address DNS server address for network cable. Then click the "Save" .(Please enter 1 in the "Network name", otherwise it cannot be saved) Step 3: Left double-click "Properties" into the "local connection status". Step 3: The following interface pops up to indicate that the setting is successful, please skip to 4.Otherwise please try LAN configuration again. Internet Protocol V ersion 4(TCP/IPv4) Step 5: While the computer's IP is configured as a static IP (as shown below). Step 7: Enter IP addressSubnet maskDefault gatewayPreferred DNS server and Optional DNS server for network cable. Then click the "Save" and "Restart" to restart the LAN Stick. Solis Home Solis Pro For End User For Distributer/Installer Step 2: Click on the "Register". Register Step 3: Fill in the form as required and click the"Register". Build Your Plant Within 1 Minute! Step 2: Enter the SN of the datalogger. The datalogger SN can be automatically scanned by placing the purchased device bar code in the scan box. If you can't scan, you can also manually enter the datalogger SN (just enter the digital serial number). Note: Please scan the SN number on the datalogger, not the SN number on the inverter. NOTES LAN Stick automatically obtains IP by default. If the network cable supports automatically obtains IP, please jump to " 3 3 " for APP registration. If network cable do not support obtains IP automatically , please continue to follow " 2 " for IP settings. Register × Step 3:Enter the plant information.Then click the "Next". Next 6 Distrubutor/Installer create plant In order to easy registration and easy manage, you can also let the distributor/installer register the plant, then Link it to you. Click the [ ] and tell the "ID" to your Distrubutor/installer to build the plant for you. (Note: your Distrubutor/installer must have a Solis Pro account) 7 Link distributor/installer Step 1: In order to easy manage to your plant. Select the plant and enter Intro. Click the "installer" or "distributor" . Solis Step 4:Enter the plant name and contact information of the plant owner. Then click the "Done". Disconnected Installer Disconnected Distributor Step 2: Enter the company name of the installer or distributor. Then click the "Search". Search Distributor Name Search Step 3: Click the [Bind Distributor/Installer] and the plant will appear in your installer/distributor monitoring interface. (Note: your installer/distributor must have a Solis Pro account to appear in the search list) Contact If you have any technical questions about our products, please contact us.Before contacting us, please confirm the following items: Equipment model Serial number of the datalogger Problem description Screenshot of the Status page in the configuration interface Bind Distributor Ginlong Technologies Co., Ltd. No. 57 Jintong Road, Binhai Industrial Park, Xiangshan, Ningbo, Zhejiang, 315712, P.R.China. Tel: +86 (0)574 6578 1806 Fax: +86 (0)574 6578 1606 Emailinfo@ginlong.com Webwww.ginlong.com