SL301C ROG Chariot Core Installation Guide

A. Package Contents

The package contains all necessary components for assembling your ROG Chariot Core gaming chair. Please verify all parts are present before proceeding.

B. Assembling Your Chair

Put on the gloves before installation.

1. Step 1: Install Wheels

   One by one, insert and push the wheels into the base.

2. Step 2: Insert Hydraulic Lift Cylinder

   Insert the hydraulic lift cylinder into the center hole of the base. Remove the red protective cap on top if there was any.

3. Step 3: Place Telescoping Cover

   Place the telescoping cover on the top of the hydraulic lift cylinder.

4. Step 4: Attach Armrests

   Armrests normally do not distinguish sides unless labeled otherwise. For models with armrest pre-assembled, please skip this step. Remove the pre-assembled bolts and washers (1 & 3). Place the 4 large washers (1) between the armrest mounting bar (2) and the seat base. Hold the armrest in place, then insert and tighten all 4 bolts (3). Use the hex key to tighten them all, and repeat on the other side.

5. Step 5: Prepare Backrest Attachment

   Use the hex key to remove the pre-assembled bolts and washers from the backrest.

6. Step 6: Attach Backrest

   Remove the protective foam covers from the brackets of the seat base. Then position the backrest carefully between the brackets. Insert and attach the 4 bolts (2 on each side) you removed in step 5 by hand first. Then use the hex key to tighten them. Start with the two bolts on the top of each side, then the bottom two.

7. Step 7: Install Side Covers

   Install the side covers and tighten the bolts. (The covers are marked "L" for the left side and "R" for the right on the inside.)

8. Step 8: Prepare for Control Unit Installation

   Now flip the chair over, facing down. Then remove the 4 pre-mounted bolts from the underside with washers.

9. Step 9: Install Control Unit

   Repeat the step above to install the control unit, and then place the nut to mount the hydraulic lift cylinder facing the back of the seat (where the backrest is installed).

10. Step 10: Final Assembly

    Insert the top of the hydraulic lift cylinder into the mounting hole on the control unit, and then turn the chair over in upright position. [Two-person handling required for your safety].

C. Installing the Lumbar Cushion

Place the lumbar cushion against the backrest to serve as lumbar support. The lumbar cushion can be placed according to individual preference to serve as lumbar support.

D. Other Features

Hanger at the back of the chair for hanging your bags, clothes, cups and more. [Maximum load: 2kg]. Please do not hang items over 2kg.

E. Adjustable Functions

The chair offers several adjustable functions for personalized comfort:

• 1. Armrest Adjustment

  • Height adjustment
  • Forward and backward adjustment
  • Rotation adjustment
  • Inward and outward adjustment

• 2. Headrest Adjustment

  Height adjustment (up to 7cm). Please do not excessively raise your headrest.

• 3. Backrest Reclining

  Pull up the lever and slowly lean back.

• 4. Chair Height Adjustment

  Adjust the chair height.

• 5. Tilt Lock

  Lock/unlock the tilt mechanism.

• 6. Seat Rockability Adjustment

  Adjust the seat's rocking motion.

Safety Notices

• Sit in the center of the chair with your back against the backrest.
• Do not sit on the edge of the chair.
• Do not stand on the chair.
• Keep your hands and fingers away from the recline mechanism.
• Do not push down on the reclined backrest when a person is sitting.
• To avoid damage to your chair, please do not use excessive force to pull up your headrest.

WARNING!

This chair should only be used in a normal and non-abusive manner. ASUS is not liable for any damages resulting from improper assembly and/or usage.

• The maximum recommended weight load is 136 KG (299.8 pounds).
• Never assemble or disassemble your chair in an improper manner.
• Please keep your chair out of direct sunlight to protect its leather.
• Please watch your back when the backrest returns back to its original position from a reclined position.