Product Liability Disclaimer-MEAN WELL Switching Power Supply ManufacturerGlobal Trade Item Number (GTIN)-MEAN WELL Switching Power Supply Manufacturer
Owner's Manual for MEAN WELL models including: RS-50 Series 50W Single Output Switching Power Supply, RS-50 Series, 50W Single Output Switching Power Supply, Single Output Switching Power Supply, Output Switching Power Supply, Switching Power Supply, Power Supply, Supply
Блок живлення що вбудовується 50W 5V RS-50-5 MeanWell за ціною від 650 грн - РКС Компоненти - РАДІОМАГ
File Info : application/pdf, 2 Pages, 145.34KB
DocumentDocument50W Single Output Switching Power Supply RS-50 series GTIN CODE MW Search: https://www.meanwell.com/serviceGTIN.aspx SPECIFICATION Features : Universal AC input / Full range User's Manual Protections: Short circuit / Overload / Over voltage Cooling by free air convection LED indicator for power on 100% full load burn-in test All using 105 long life electrolytic capacitors Withstand 300VAC surge input for 5 second High operating temperature up to 70 Withstand 5G vibration test No load power consumption<0.5W High efficiency, long life and high reliability 3 years warranty AS/NZS62368-1 GB4943.1 UL62368-1 Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 BS EN/EN62368-1 IEC62368-1 TPTC004 MODEL RS-50-3.3 RS-50-5 RS-50-12 RS-50-15 RS-50-24 RS-50-48 DC VOLTAGE 3.3V 5V 12V 15V 24V 48V RATED CURRENT 10A 10A 4.2A 3.4A 2.2A 1.1A CURRENT RANGE 0 ~ 10A 0 ~ 10A 0 ~ 4.2A 0 ~ 3.4A 0 ~ 2.2A 0 ~ 1.1A RATED POWER 33W 50W 50.4W 51W 52.8W 52.8W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 120mVp-p 120mVp-p 120mVp-p 200mVp-p OUTPUT VOLTAGE ADJ. RANGE 3V ~ 3.6V VOLTAGE TOLERANCE Note.3 ±3.0% LINE REGULATION Note.4 ±0.5% LOAD REGULATION Note.5 ±2.0% 4.75 ~ 5.5V ±2.0% ±0.5% ±1.0% 10.8 ~ 13.2V ±1.0% ±0.5% ±0.5% 13.5 ~ 16.5V ±1.0% ±0.5% ±0.5% 22 ~ 27.2V ±1.0% ±0.5% ±0.5% 42 ~ 54V ±1.0% ±0.5% ±0.5% SETUP, RISE TIME 500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load HOLD UP TIME (Typ.) 60ms/230VAC 14ms/115VAC at full load VOLTAGE RANGE 88 ~ 264VAC 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage) FREQUENCY RANGE 47 ~ 63Hz INPUT EFFICIENCY(Typ.) 78% 83% 84.5% 86% 88% 89% AC CURRENT (Typ.) 1.3A/115VAC 0.8A/230VAC INRUSH CURRENT (Typ.) COLD START 33A/230VAC LEAKAGE CURRENT <2mA / 240VAC OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +70 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +85, 10 ~ 95% RH ±0.03%/ (0 ~ 50) 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes 27.6 ~ 32.4V 55.2 ~ 64.8V SAFETY STANDARDS UL62368-1, TUV BS EN/EN62368-1 , AS/NZS 62368.1 , EAC TP TC 004, CCC GB4943.1 approved SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE (Note 6) EMC EMISSION I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3,GB9254 class B,GB17625.1, EAC TP TC 020 EMC IMMUNITY MTBF Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN55035, BS EN/EN61000-6-2 (BS EN/EN50082-2), heavy industry level, EAC TP TC 020 2956.7K hrs min. Telcordia SR-332 (Bellcore) ; 575.2K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION PACKING 99*97*36mm (L*W*H) 0.41Kg; 45pcs/19.5Kg/0.94CUFT NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1F & 47F parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf ) 7. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). Product Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:RS-50-SPEC 2024-02-23 Downloaded from Arrow.com. 50W Single Output Switching Power Supply Mechanical Specification RS-50 series Case No. 905B Unit:mm 36 2-M3 L=4 51.5 9.5 3.5 1 2 3 5.5 4 5 97 8.2 55.5 7 17.5 28 36 20.5 55 3.5 4.5 89 99 6.5 87 3.5 2-M3 L=4 18 74 3.5 Block Diagram Terminal Pin No. Assignment Pin No. Assignment Pin No. 1 AC/L 4 2 AC/N 5 3 FG Assignment DC OUTPUT -V DC OUTPUT +V fosc : 60KHz I/P EMI FILTER RECTIFIERS & POWER SWITCHING RECTIFIERS & FILTER FILTER +V -V FG DETECTION CIRCUIT O.L.P. CONTROL O.V.P. Derating Curve Output Derating VS Input Voltage 100 80 60 40 20 -25 0 10 20 30 40 50 60 70 (HORIZONTAL) -25 0 AMBIENT TEMPERATURE () 100 90 80 70 60 50 40 88 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:RS-50-SPEC 2024-02-23 LOAD (%) LOAD (%) Downloaded from Arrow.com.