Airbi SPACE WiFi Air Purifier

Instruction manual (version 1.0)

Please read the instruction manual carefully before using this appliance!

Important Safety Instructions

Please read through the operating instructions carefully before you use the appliance for the first time and keep them safely for later reference. If necessary, pass them on to the next owner.

1. The appliance is only to be used in the home for the purposes described in these instructions. Unauthorized use and technical modifications to the appliance can lead to danger to life and health.
2. This appliance can be used by children aged from 10 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
3. After unpacking, make sure that the appliance wasn't damaged during transport. If you find any damage, contact your dealer as soon as possible. We recommend you keep the packaging for possible future use.
4. Before first use, check that the device parameters (electric voltage, etc.) correspond to local conditions.
5. Use appliance in an environment of 10°C to 30°C. Do not use outdoors.
6. Please put appliance more than 1 meter away from TV or radio. It is recommended to put appliance on a flat ground in the room.
7. Do not place the appliance near a heat source. Do not subject the power cord to direct heat (such as a heated hotplate, open flames, hot iron sole plates or heaters, for example). Protect power cords from oil.
8. Always put the appliance on a hard, flat horizontal surface. There should be a gap of at least 20 cm at both sides and back of the product, while 30 cm from the top surface.
9. Do not place anything on the appliance and do not block the air inlet and outlet.
10. Before using the appliance, check if the AC adapter or power cord is not damaged. Do not use it if the cord is damaged.
11. If the power cord is damaged, it must be replaced by the manufacturer or a repair shop authorized by the manufacturer or by similarly qualified persons in order to avoid a hazard.
12. Switch off and unplug the unit before any manipulation such as cleaning of filters or maintenance.
13. Do not lift or move the appliance when it is working.
14. Do not touch the power cord with wet hands; may cause electric shock.
15. Do not insert fingers or metal objects into the air outlet gap; may cause electric shock.
16. Do not let water, flammable detergent or other liquid get into the product; may cause electric shock or fire.
17. This product is not supposed to be used as a daily ventilator, dust cleaner, or cooker hood.
18. Do not place appliance in too humid or too hot places.
19. Do not use the appliance in aromatherapy, scent, or insecticide environments.
20. Store the appliance in a dry place inaccessible to children (pack the appliance).
21. Manufacturer is not responsible for any damage due to improper use of appliance.

Packing List

• Appliance
• Prefilters (2 pcs)
• Filters (2 pcs)
• User manual

Purifier's Scheme

The purifier consists of the following parts:

• 1. Base
• 2. Kombi filter (HEPA + active carbon)
• 3. Prefilter
• 4. Filter's cover

Before First Use

1. Open the filter's covers and take out prefilters and combi filters (HEPA + active carbon).
2. Remove all packaging material.
3. Install filters back to their position and put back both covers.

Control Overview and Operation Instructions

The control panel features the following buttons:

• 1. Switch on/off button [▶️]
• 2. Mode button [⚙️]
• 3. Fan speed button [?]
• 4. Maintenance indicator button [?]
• 5. Timer button [⏱️]
• 6. Child lock button [?]

After connecting the power cord to the electric socket, you will hear a sound notification, and all segments will appear on the display for a moment. The appliance is now in standby mode. The air quality indicator lights up in red color.

Power Button

Press the on/off button once, and the appliance will switch on in automatic mode. Press it again, and the appliance will switch off (standby mode). Please note that the appliance has a built-in security function – it will switch off if the filter's cover is open.

Mode Button

The mode button allows the user to change the mode of operation: automatic, smoke, or night mode.

• Automatic Mode: The fan speed depends on the air quality in automatic mode. Air quality is monitored by the built-in PM2.5 dust sensor. The display shows the [AUTO] symbol.
• Smoke Mode: The fan is set to maximum speed, and the display shows the [???] symbol.
• Night Mode: The fan is set to minimum speed, and the display shows the [?] symbol. After a while, the display switches off. If any button is pressed, the display will light on for a while and then switch off again.

Speed Button

The speed button allows the user to change the fan speed: low, middle, high. The display shows a corresponding symbol for the selected speed.

• Low speed: [?]
• Middle speed: [??]
• High speed: [???]

Child Lock Button

This button activates the child lock function. All buttons will be disabled when the child lock is active. Press and hold this button for 5 seconds to deactivate this function.

Timer Button

By repeatedly pressing the timer button, the user can set a timer for 1-12 hours. The preset time is indicated by an LED on the top panel, which lights up. If the timer function is active, the user can check the remaining time (in minutes) by briefly pressing the timer button in normal mode. If the timer's LED does not light up, it means the timer is not active.

Filter Button

The appliance has a maintenance indicator button that notifies the user to perform filter maintenance.

• The Filter button starts to blink after 300 hours of work, indicating that filter maintenance is required. More details are in the 'Product Care and Maintenance' section. After maintenance, reset the indicator by pressing the filter button for 5 seconds.
• The Filter button lights up red after 4500 hours of work, indicating that the kombi filters need to be replaced. After replacement, reset the indicator by pressing the filter button for 5 seconds.

Note: The current working time since the last reset can be shown on the display by briefly pressing the filter button once. The first number that appears on the display indicates thousands of hours, the second number indicates hundreds, tens, and units of hours. For example, if the first number is 1 and the next number is 358, it means the device has been in operation for 1358 hours since the last reset of the indicator.

Air Quality Indication

The air quality indicator (7) informs the user about the ambient air quality:

• Blue color: Excellent air conditions
• Green color: Good air conditions
• Orange color: Worse air conditions
• Red color: Bad air quality

Connection to WiFi - Control by App

You can use the application on your smartphone or tablet (iOS, Android) to control the device. Before the device can be controlled via the application, it is necessary to configure the device and allow it to connect to a WiFi network. Instructions for the application and setup of the device can be found at www.airbi.cz/space-wifi.

Product Care and Maintenance

Warning: Ensure to disconnect the power before cleaning and maintenance.

Pre-filter (every 15 days)

Please use a vacuum cleaner to clean the dust on the surface of the screen or wash it with water. Dry thoroughly.

HEPA / Carbon Filter (every two months)

• Use a vacuum cleaner to clear the dust on the surface of the screen.
• Place the filter in a ventilated place. Do not expose to strong sunlight.
• Do not use water to clean the filter.

Particle Sensor (every two months)

• Remove the sensor's cover.
• Use a dry cotton swab to clean the sensor.
• Regularly clean the sensor from dust.
• Use a flashlight if you cannot see the sensor.

Air Outlet and Ionizer (every two months)

• On the top grid, find the symbol [△].
• Lift the side with this symbol and carefully remove the grid.
• Use a vacuum cleaner to collect dust from the top of the unit.
• The ionizer is located at the air outlet at the top of the instrument (side with the symbol [△]). If you do not see the ionizer, use a flashlight.
• Use a brush pen to gently clean the ionizer from any dust that has been collected.

Note

• Please unplug the power if the appliance is not in use for a long time.
• Depending on the usage environment and methods (e.g., a family with many smokers or a place with serious pollution), the filter life may be shortened. Please replace the filter in time.
• To clean the device, do not use any aggressive concentrated detergents.
• The air purifier works silently, but not without any noise. Purifier noise less than 66 dB is not a fault.

Filtration System

1. Pre-filter: Dust capturing filter at the front. It filters pollutants like large dust particles, hairs, pollen, and suspended particles. It is washable and reusable.
2. Activated Carbon Filter: Absorbs various smells, such as formaldehyde. Formaldehyde is a colorless gas with a strong odor, often considered the most dangerous harmful substance indoors because it is highly irritating to the upper airways and eyes.
3. True HEPA Filter: Adsorbs particles down to 0.0001 mm, such as pollen, drifting dust, and germs, with a purification efficiency of more than 99.9%. It prevents the spread of airborne bacterial and viral organisms.
4. Anion Generator (Ionizer): A double-core anion generator releases a large amount of anions, making the oxygen negatively charged. Anions not only remove dust, kill bacteria, and purify air efficiently but also facilitate synthesis in the human body and the storage of vitamins. The ionizer can be switched on or off by simultaneously holding down the mode button [2] and the filter button [4] for 3 seconds. One beep indicates the ionizer is on; two beeps indicate it is off.

Replacing the Filters

The device is equipped with a filter maintenance indicator. You can find more information in the 'Control Overview and Operation Instructions' section.

Troubleshooting

Technical Specifications

Disposal of the Device (Environment)

The European directive 2012/19/CE on Waste Electrical and Electronic Equipment (WEEE) requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed-out "wheeled bin" symbol [?️] on the product reminds you of your obligation: when you dispose of the appliance, it must be collected separately. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

This product complies with the essential requirements and other relevant provisions of the EMC directive 2014/30/EU. The device was approved for use in EU countries and therefore bears the CE marking. All necessary documentation is available at the importer's address.

Changes in technical parameters, properties, and printing errors in the instruction manual are reserved.

Importer Address:
Bibetus s.r.o.
Loosova 262/1
Brno 63800
Czech Republic
E-mail: info@bibetus.cz