Inspire ROSAK Ceiling Fan

Product Overview

This document provides instructions for the installation and operation of the Inspire ROSAK ceiling fan. It includes technical characteristics, safety precautions, and remote control functions.

The product is recyclable. If it cannot be used anymore, please take it to a waste recycling centre.

Made in China

Technical Characteristics

• Assembly: Instructions for mounting the fan.
• Use: Instructions for operating the fan.
• Energy Efficiency Class: D
• Voltage: 220-240V
• Max Wattage: 40W
• Frequency: 50/60Hz
• Power Factor: PF≥0.9
• IP Rating: IP20
• Operating Temperature: ta -10 / 60°C
• LED Specifications: LED-36V
• Max Power Consumption: Max. 24.8W, Max. 64.8W
• Airflow: 7520 m³/h
• Noise Level: 34dB(A) to 42.6dB(A)
• Airflow Efficiency: 5.0 (m³/min)/W
• Air Speed: 2.9m/s

Installation Guide

The installation process involves several steps, including mounting the bracket, assembling the fan body, and connecting the electrical components. Please refer to the diagrams for detailed visual guidance.

Tools required: Drill, tape measure, hammer, screwdriver, wrench.

Step 1: Mount the ceiling bracket (A) securely to the ceiling using appropriate screws and dowels (J, K, L).

Step 2: Assemble the downrod (D) and attach it to the motor housing (F).

Step 3: Hang the fan assembly onto the ceiling bracket.

Step 4: Connect the wires according to the wiring diagram, ensuring correct polarity (L-N-Ground).

Step 5: Secure the canopy (B) to the ceiling bracket.

Step 6: Attach the fan blades (C) to the motor.

Step 7: Install the light kit (if applicable).

Step 8: Final checks and power connection.

Important Safety Notes:

• Ensure the ceiling is capable of supporting the fan's weight.
• Installation should be performed by a qualified electrician.
• Ensure all electrical connections are secure and insulated.
• The fan must be installed at a minimum height of 2.3m from the floor.
• The fan should not be installed in a location where it can be tilted more than 15 degrees.

Remote Control Operation

The included remote control allows you to operate the fan and light functions:

• Power Button: Turns the fan and light on/off.
• Fan Speed Control: Adjusts the fan speed through multiple levels.
• Light Control: Adjusts the brightness and color temperature of the light (2700K - 6500K).
• Timer Function: Sets a timer for the fan to turn off automatically (2h, 4h).
• Direction Control: Switches between summer (downward airflow) and winter (upward airflow) modes.

Pairing the Remote: If the remote control is not working, it may need to be re-paired with the fan. Follow the instructions in the manual for re-pairing.

Troubleshooting

Fan does not operate: Check power supply, ensure all connections are secure, and verify the remote control is paired correctly.

Light does not work: Check the bulb or LED module, and ensure electrical connections are correct.

Noisy operation: Ensure all screws are tightened, fan blades are balanced, and the fan is securely mounted.

Contact Information

For further assistance, please contact ADEO Services or your local retailer.

EU: ADEO Services - 135 Rue Sadi Carnot - CS00001 - 59790 RONCHIN - FRANCE

UA: ТОВ "Адео Сервісез С.А.", вул. Саді Карно, CS 00001, 59790 Роншен, Франція.

ZA: Imported by Adeo South Africa (PTY) LTD T/A Leroy Merlin, 35 Roos Street, Witkoppen Ext 97, Sandton, 2191 Johannesburg, Gauteng, South Africa.

BR: LEROY MERLIN COMPANHIA BRASILEIRA DE BRICOLAGEM CNPJ: 01.438.784/0001-05 Rua Pascoal Pais, nº. 525, São Paulo-SP. CEP: 04581-060