UniFi NAS Professional

Datasheet UNAS-Pro

Product Overview

A front-view image shows a sleek, silver, rack-mountable network-attached storage (NAS) device with four drive bays visible on the front panel. The device has a compact, rectangular form factor.

Specifications

Mechanical

Attribute	Value
Dimensions	442 x 325 x 87 mm (17.4 x 12.8 x 3.4")
Weight	Without rackmount brackets: 9.2 kg (20.28 lb) With rackmount brackets: 9.45 kg (20.83 lb)
Enclosure material	SGCC steel
Mount material	SGCC steel

Hardware

Attribute	Value
Processor	Quad-Core ARM® Cortex®-A57 at 1.7 GHz
System memory	4 GB DDR4
On-board flash storage	32 GB eMMC
Max. power consumption	160W
Max. power budget for drives	135W
Power method	(1) Universal AC input, 100-240V AC, 3A Max, 50/60 Hz (1) USP-Battery DC input, 11.5V DC, 13.91A
Power supply	AC/DC, internal, 200W
Networking interface	(1) 10/100/1000 MbE RJ45 port (1) 1/10 GbE SFP+ port
RF interface	(1) Bluetooth v4.1
LCM display	(1) 1.3" touchscreen (Bootup animation: bootup in progress; Firmware upgrade icon: firmware upgrading; Steady white: factory defaults, awaiting adoption; Steady blue: device is adopted)
Management interface	Ethernet in-band
ESD/EMP protection	Air: ± 12kV, Contact: ± 8kV
Operating temperature	-5 to 40° C (23 to 104° F)
Operating humidity	5 to 95% noncondensing
Certifications	FCC, CE, IC

LEDs

Indicator	Status
Ethernet	Green: 1 Gbps Amber: 10/100 Mbps
SFP+	White: 10 Gbps Green: 1 Gbps
HDD	Amber: disk error White: disk detected
Battery	Blue: ready

Compliance Information

FCC

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

Class A Products

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

To correct interference, the user is encouraged to try one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

ISED Canada

CAN ICES-3(A)/NMB-3(A)

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device.

This apparatus complies with ISED Canada's licence-exempt RSS applicable to radio apparatus. Operation is authorized under the following two conditions: 1. The apparatus must not produce interference; 2. The apparatus must accept any radio interference, even if the interference is likely to compromise its functioning.

RF Exposure Warning

The antennas used for this transmitter must be installed to provide a separation distance of at least 20(FCC/IC) cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter.

The antennas used for this transmitter must be installed considering a separation distance of at least 20(FCC/IC) cm from all persons and must not be located or used in conflict with any other antenna or transmitter.

	Ubiquiti UNAS 2 (UNAS-2) Technical Specifications Detailed technical specifications for the Ubiquiti UNAS 2 (UNAS-2) Network Attached Storage device, including dimensions, hardware, software, and environmental requirements.
	Ubiquiti UNAS 4 NAS: Technical Specifications and Overview Detailed technical specifications for the Ubiquiti UNAS 4 Network Attached Storage (NAS) device, including dimensions, storage, networking, hardware, and operating conditions.
	Ubiquiti UniFi U7 Pro Access Point Quick Start Guide This guide provides essential information for setting up and using the Ubiquiti UniFi U7 Pro Access Point, including network connectivity and device management.
	Ubiquiti UniFi Cloud Key Gen2 (UCK-G2) RF Exposure Evaluation Report This report details the RF exposure evaluation for the Ubiquiti UniFi Cloud Key Gen2 (Model UCK-G2, FCC ID SWX-UCKG2) conducted by Sporton Lab, confirming compliance with FCC Part 2.1091 standards.
	Ubiquiti UniFi 6+ Access Point Quick Installation Guide A concise guide to installing and setting up the Ubiquiti UniFi 6+ Access Point, detailing hardware specifications, network connections, and mobile app integration.
	UniFi Protect Network Video Recorder Pro Safety & Regulatory Guide Safety and regulatory information for the UniFi Protect Network Video Recorder Pro, including electrical safety, compliance statements for FCC and ISED Canada, and radiation exposure information.
	UniFi Express Quick Setup Guide A concise guide to setting up your UniFi Express device, including connection instructions and app usage.
	UniFi 6 Mesh U6-Mesh Datasheet Datasheet for the UniFi 6 Mesh U6-Mesh access point, detailing its mechanical and hardware specifications, software features, and supported data rates for Wi-Fi 6 connectivity.