UK DECLARATION OF CONFORMITY
Issued: 21/08/2025
Object of the Declaration
The object of the declaration described below is in conformity with the relevant statutory requirements:
- SI 2017 No. 1206 The Radio Equipment Regulations 2017
- SI 2012 No. 3032 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
- SI 2023 No. 1007 The Product Security and Telecommunications Infrastructure Regulations 2023
Applicable security requirements in Schedule 1 with a defined support period until 03 September, 2027.
Conformity Standards
The equipment complies with the following standards:
- 3GPP TS 36.521-4:v18.2.0 Technical Specification Group Radio Access Network; Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) conformance specification; Radio transmission and reception. Part 4: Satellite access Radio Frequency (RF) and performance Conformance Testing.
- EN 300 328:v2.2.2 Wideband transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using wideband modulation techniques
- EN 300 330:v2.1.1 Short-Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz
- EN 301 489-1:v2.2.3 Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements
- EN 301 489-3:v2.3.2 Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz
- EN 301 489-17:v3.3.1 Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: specific conditions for Broadband Data Transmission Systems
- EN 301 489-19:v2.2.1 Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1.5 GHz band providing data communications and GNSS receivers operating in the RNSS band (ROGNSS) providing positioning, navigation and timing data
- EN 301 489-20:v2.2.1 Electromagnetic compatibility and Radio Spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 20: Specific conditions for Mobile Earth Stations used in Mobile Satellite Services
- EN 301 489-52:v1.3.1 Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment
- EN 301 908-1:v15.2.1 IMT cellular networks; Part 1: Introduction and common requirements
- EN 301 908-13:v13.2.1 IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)
- EN 303 413:v1.2.1 Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands
- EN 13319:2000 Diving accessories - Depth gauges and combined depth and time-measuring devices
- EN 50360:2017/A1:2023 Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear
- EN 50566:2017/A1:2023 Product standard to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices used by the general public (30 MHz – 6 GHz)
- EN 50663:2017 Generic standard for assessment of low-power electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (10 MHz – 300 GHz)
- EN 50665:2017 Generic standard for assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz – 300 GHz)
- EN 55032:2015+A11:2020 Electromagnetic compatibility of multimedia equipment – Emission requirements
- EN 55035:2017/A11:2020 Electromagnetic compatibility of multimedia equipment - Immunity requirements
- EN 62368-1:2014/AC2015 Audio/Video, Information and Communications Technology Equipment - Safety requirements
- EN 62471:2008 Photobiological safety of lamps and lamp systems
Type Examination Certification
The notified body Timco Engineering Inc. (Notified Body Number 1177) evaluated compliance to Article 3.1(a), 3.1(b), 3.2, 3.3(d) of the Radio Equipment Directive 2014/53/EU and issued the EU-type examination certificate: E177-255834.
Product Information
Type of Equipment: Information Technology Equipment (Sports Watch)
Model Numbers: A04809, fēnix 8 Pro – 51mm
Manufacturer Details
GARMIN International1200 E 151st Street
Olathe, KS 66062
U.S.A. GARMIN Corporation
No.68, Zhangshu 2nd Rd.,
Xizhi Dist., New Taipei City 221,
TAIWAN, R.O.C
Declaration of Compliance
The undersigned does hereby declare that the equipment complies with the above Directives and Standards.
Signed for and on behalf of: GARMIN (Europe) Ltd.
Place: Hampshire, UK
Date: 21/08/2025
Name: Jamie Wiltshire
Function: Quality Associate