Instruction Manual for Uponor models including: 1135567, 1135568, 1135572, 1135574, 1135567 Aqua Port, 1135567, Aqua Port, Port
File Info : application/pdf, 2 Pages, 224.54KB
DocumentDocumentUponor AquaPort M-XS Toensurethebest hygieneinthesystem With the Aqua Port M-XS near a distant tapping point, the total volume of hot water will be reduced. Installation/systemrecommendation Addition to HIU for distant tapping point Application Decentralised, instantaneous domestic hot water generation Installationoptions On wall, without cabinet Certificates DVGW approval Specifications Port fully assembled and pressure tested Pipe clamps made of plastic for sound protection and thermal decoupling DVGW-certified PM valve with patented triple-sealing technology Venting valve Thermostatic bypass valve Strainer for cold water, 0.5 mm Strainer for primary heating supply line, 0.5 mm Connection port (marked) for an electrical earthing lug Max. operating pressure, heating: PN10 Max. operating pressure, sanitary: PN10 Max. operating temperature: 85 °C Max. differential pressure, heating: 2.5 bar Min. pressure, sanitary: 2.0 bar Fitting material, sanitary: CW617N Fitting material, heating: CW617N, CW614N Pipe material: Stainless steel, 1.4401 Measurements: W/H/D 255 × 376 × 148 mm Uponor AquaPort M-XS Fordomestichot waterpreparation. Accessoriescodes 15,19 Domestic hot water capacity indication (l/min.) St Stainless steel heat exchanger brazed without non-ferrous metal for domestic hot water preparation BP Supply line preheating function DI Primary differential pressure controller at the heat interface unit inlet TL Thermostatic temperature limiter for domestic hot water, with submersible sensor Itemno. Accessoriescodes 1135567 15 St BP DI TL 1135568 19 St BP DI TL 1135572 15 St BP DI 1135574 19 St BP DI Furtherinformation onUponorAqua PortM-XS Technical information UponorCorporation Illmalantori 4 00240 Helsinki Finland www.uponor.com 1146093 - 08/2024 - EN 1135549 - 05/2022 - EN