Instruction Manual for HELY WEBER models including: 455, 459, 6893410, 6893410 Titan Thumb Lacing Orthosis, Titan Thumb Lacing Orthosis, Lacing Orthosis
Instructions
File Info : application/pdf, 1 Pages, 679.17KB
DocumentDocument455 Titan Thumb 459 Warnings and Instructions: Review carefully, proper application is required YWarning: This device will not prevent or eliminate risk of injury. Do Not Overtighten. If swelling, pain, skin irritation, or an unusual reaction occurs, discontinue use immediately and consult your medical professional. This device should not be worn by persons with known allergies to neoprene. Care: Hand wash using mild soap. Rinse thoroughly. Air dry only. Do not tumble dry. 1 2 3 1. Position hand in brace. 4 2. Position the brace so the palm stay is below the midhand crease. 3. Position the long thumb stay to follow the outside contour of the thumb and arm. 5 6 4. Pull and secure the narrow thumb strap to the brace. 7 5. Pull and secure the remaining two thumb straps. 6. Attach the stay pod along the side of the arm. 8 7. Pull and fasten the lacing straps. If necessary, re-adjust the stay pod so that the hook closure does not overlap the laces. Scan to watch application video 8. The finished application should fit below the forehand crease and should not obstruct the knuckles. U.S. Patent No. 6893410, 6960176, 7033331, 7056298 © 2023 Weber Orthopedics Inc. DBA Hely & Weber all rights reserved 1185 E Main St., Santa Paula, California 93060 California: 800-221-5465, National: 800-654-3241 International: 805-525-4244, fax: 805-933-2348 U.S. fax: 800-559-5975, www.hely-weber.com Rev E 4/23