AXIS A1001 Network Door Controller Installation Guide

Installation Guide for AXIS models including: A1001 Network Door Controller, A1001, Network Door Controller, Door Controller, Controller

Axis Communications AB

AXIS A1001 Network Door Controller — Quick reference Installation Guide

File Info : application/pdf, 28 Pages, 5.43MB

ig a1001doorcontroller 2380090 en 2106

AXIS A1001 Network Door Controller -- Quick reference
Installation Guide

Liability Every care has been taken in the preparation of this document. Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material. This product is only to be used for its intended purpose.
Intellectual property rights Axis AB has intellectual property rights relating to technology embodied in the product described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the patents listed at axis.com/patent and one or more additional patents or pending patent applications in the US and other countries.
This product contains source code copyright Apple Computer, Inc., under the terms of Apple Public Source License 2.0 (see opensource.apple.com/apsl). The source code is available from developer.apple.com/bonjour/
Equipment modifications This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user-serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.
Trademark acknowledgements AXIS COMMUNICATIONS, AXIS and VAPIX are registered trademarks or trademark applications of Axis AB in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies.
Assa and Aperio are trademarks or registered trademarks of ASSA ABLOY AB.
SimonsVoss and SmartIntego are trademarks or registered trademarks belonging SimonsVoss Technologies GmbH
HID, HID Global, the HID Blue Brick logo, HID Mobile Access, iCLASS SE, Seos, Prox, and Secure Identity Services are trademarks or registered trademarks of HID Global in the U.S. and/or other countries.
Network Time Protocol Version 4 Distribution is copyright of University of Delaware © University of Delaware 19922011. The following copyright notice applies to all files collectively called the Network Time Protocol Version 4 Distribution. Unless specifically declared otherwise in an individual file, this notice applies as if the text was explicitly included in the file. Permission to use, copy, modify, and distribute this software and its documentation for any purpose with or without fee is hereby granted, provided that the above copyright notice appears in all copies and that both the copyright notice and this permission notice appear in supporting documentation, and

that the name University of Delaware not be used in advertising or pertaining to distribution of the software without specific, written prior permission. The University of Delaware makes no representations about the suitability this software for any purpose. It is provided "as is" without express or implied warranty.
Support Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:
· download user documentation and software updates
· find answers to resolved problems in the FAQ database, search by product, category, or phrase
· report problems to Axis support staff by logging in to your private support area
· chat with Axis support staff · visit Axis Support at axis.com/support
Learn more! Visit Axis learning center axis.com/academy for useful trainings, webinars, tutorials and guides.
Regulatory information Europe
This product complies with the applicable CE marking directives and harmonized standards:
· Electromagnetic Compatibility (EMC) Directive 2014/30/EU. See Electromagnetic compatibility (EMC) on page 2 .
· Low Voltage Directive (LVD) 2014/35/EU. See Safety on page 3 .
· Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU, including any amendments, updates or replacements. See Disposal and recycling on page 3 .
A copy of the original declaration of conformity may be obtained from Axis Communications AB. See Contact information on page 4 .
Electromagnetic compatibility (EMC) This equipment has been designed and tested to fulfill applicable standards for:
· Radio frequency emission when installed according to the instructions and used in its intended environment.
· Immunity to electrical and electromagnetic phenomena when installed according to the instructions and used in its intended environment.
USA
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested using a shielded network cable (STP) and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment
and receiver. · Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. The product shall be connected using a shielded network cable (STP) that is properly grounded.
Contact information Axis Communications Inc. 300 Apollo Drive Chelmsford, MA 01824 United States of America Tel: +1 978 614 2000
Canada This digital apparatus complies with CAN ICES-3 (Class B). The product shall be connected using a shielded network cable (STP) that is properly grounded. Cet appareil numérique est conforme à la norme CAN NMB-3 (classe B). Le produit doit être connecté à l'aide d'un câble réseau blindé (STP) qui est correctement mis à la terre.
Europe
This digital equipment fulfills the requirements for RF emission according to the Class B limit of EN 55022. The product shall be connected using a shielded network cable (STP) that is properly grounded.
Australia/New Zealand This digital equipment fulfills the requirements for RF emission according to the Class B limit of AS/NZS CISPR 22. The product shall be connected using a shielded network cable (STP) that is properly grounded.
Japan B (STP)
Safety This product complies with IEC/EN 60950-1, Safety of Information Technology Equipment.
If its connecting cables are routed outdoors, the product shall be grounded either through a shielded network cable (STP) or other appropriate method.

The power supply used with this product shall fulfill one of the following requirements:
· Safety Extra Low Voltage (SELV) according to clause 2.2 of IEC/EN/UL 60950-1 and Limited Power Source (LPS) according to clause 2.5 of IEC/EN/UL 60950-1 or CEC/NEC Class 2 source of supply as defined in the Canadian Electrical Code, CSA C22.1 and National Electrical Code, ANSI/NFPA 70
· Class 1 electrical energy source (ES1) and Class 2 power source (PS2) rated output power limited to 100 W according to IEC/EN/UL 62368-1
Disposal and recycling When this product has reached the end of its useful life, dispose of it according to local laws and regulations. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. In accordance with local legislation, penalties may be applicable for incorrect disposal of this waste.
Europe

This symbol means that the product shall not be disposed of together with household or commercial waste. Directive 2012/19/EU on waste electrical and electronic equipment (WEEE) is applicable in the European Union member states. To prevent potential harm to human health and the environment, the product must be disposed of in an approved and environmentally safe recycling process. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. Businesses should contact the product supplier for information about how to dispose of this product correctly.
This product complies with the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).
China
This product complies with the requirements of SJ/T 11364-2014, Marking for the restriction of hazardous substances in electrical and electronic products.

(Pb) (Hg) (Cd)

(Cr-

(VI)) (PB-

B) (PB-

DE)

0: GB/T 26572 X: GB/T 26572

Contact information Axis Communications AB Gränden 1 223 69 Lund Sweden
Tel: +46 46 272 18 00 Fax: +46 46 13 61 30
axis.com
Supported Readers This list of supported readers is subject to change without notice. Contact your Axis reseller for information about supported readers.
This product is compatible with UL Listed Wiegand access control readers
This product is compatible with the following RS485 access control readers:
AXIS A4011-E Reader
HID iCLASS® RW100: 6101CG40000, 6101CGM0000, 6101CK40000, 6101CK40002, 6101CK40100, 6101CK403C0, 6101CKM0000, 6101CKM0002, 6101CKM0203; RW300: 6111CG40000, 6111CG400C0, 6111CGM0000, 6111CK40000, 6111CK4000Z, 6111CKM0000; RW400: 6121CG40000, 6121CGM0000, 6121CK40000, 6121CK40003, 6121CK40007-G3.0, 6121CK4000D-G3.0, 6121CKM0000; R40: 6122CKP00P0, 6122CKP05P0, 6122CKP06P0; RWK400: 6131CG4020000, 6131CK4000000, 6131CK4000014, 6131CK4000300, 6131CK4020000, 6131CKM000000, 6131CKM000214; RK40: 6132BKP00Q709-G3.0, 6132CKP000009, 6132CKP000011, 6132CKP000700-G3.0, 6132CKP000709-G3.0, 6132CKP001009, 6132CKP001011, 6132CKP00P000, 6132CKP00P009, 6132CKP00P709-G3.0, 6132CKP00Q709-G3.0, 6132CKP030014, 6132CKP060514, 6132CKP06P009, 6132CKP06P609, 6132CKP070209; RW150: 6141CG40000, 6141CGM0000, 6141CK40000, 6141CKM0000; R15: 6142CKP000Z, 6142CKP00P0, 6142CKP0100; RWKL550: 6171BK4000000, 6171BK4000009, 6171BK4000014, 6171BK4000214, 6171BK4000500, 6171BK4040Z14, 6171BK4060000, 6171BK4060209, 6171BK4060Z09, 6171BK4061000, 6171BKM000000, 6171BKM000200, 6171BKM000300, 6171BKM040400; RWKLB575: 6181BK4000000, 6181BK4000009, 6181BK4000014, 6181BK4000022, 6181BK406C009;
HID Smartid®: 8031DSAP

HID pivClass® R10-H: 900LHRNAK00000, 900LHRTAK00000, 900NHRNAK00000, 900NHRTAK00000, 900PHRNAK00000, 900PHRTAK00000, 910LHRNAK00000, 910LHRTAK00000, 910NHRNAK00000, 910NHRTAK00000, 910PHRNAK00000, 910PHRTAK00000, 920LHRNAK00000, 920LHRTAK00000, 920NHRNAK00000, 920NHRTAK00000, 920PHRNAK00000, 920PHRTAK00000, 921LHRNAK00000, 921LHRTAK00000, 921NHRNAK00000, 921NHRTAK00000, 921PHRNAK00000, 921PHRTAK00000; RPKCL40-P: 923LPRNAK00000, 923LPRTAK00000, 923NPRTAK00000, 923PPRNAK00000, 923PPRTAK00000
AptiqTM: M11, MTK15, MTMSK15, MT15, MTMS15
For information about which compatible RS485 access control readers have been verified by UL, see
Requirements for Compliance with UL294 6th Edition on page 4 .
Requirements for Compliance with UL294 6th
Edition This section contains information and instructions required for UL compliance. To make sure the installation is UL compliant, follow the instructions below in addition to the general information and instructions provided throughout this document. In cases where pieces of information contradict each other, the requirements for UL compliance always replace general information and instructions.
Supported readers
· Compatibility with the following RS485 readers has been verified by UL: HID iClass RK40, HID SmartID 8031 DSHM, and AptiqQ MTMSK15.
Safety instructions
· The Axis product shall be installed and serviced by a factory trained professional.
· The Axis product shall be installed within the protected premises (secured area).
· The Axis product shall be mounted indoors. Outdoor use has not been evaluated or approved by UL.
· All interconnecting devices shall be UL Listed and Class 2 low-voltage power limited.
· All wiring methods shall be performed in accordance with NFPA70, local codes and authorities having jurisdiction.
· When the Axis product has reached the end of its useful life, dispose of it according to local laws and regulations. The product should not be disposed of together with household or commercial waste. See Disposal and recycling.
· Battery - The 3.0 V lithium battery used by the Axis product is a UL Recognized component. (Type: BR2032, diameter: 20 mm (0.78 in), manufacturers: Rayovac, Panasonic). The following battery type is also a UL Recognized component: Type CR2032, manufacturers: Fuji, Maxell, Renata, Varta, Panasonic, JHIH

- Users shall not replace

- The Axis product, whether it is

the battery. If the battery

a standalone door controller or

needs replacing, a factory

a system of door controllers,

trained service professional

shall not impair the intended

shall contact Axis support

operation of the panic

at www.axis.com/techsup for

hardware used in conjunction

assistance.

with it.

- Used batteries shall be disposed · Wall and ceiling mount

of according to local laws and

- If using a junction box to

regulations, which may vary

mount the Axis product, the

from state to state. Waste

junction box shall be UL Listed.

BR/CR lithium cells are neither · Assign an IP address

listed nor exempted from

- The functionality of AXIS

the USEPA hazardous waste

Device Manager, see the

regulations. Waste lithium

User Manual, has not been

batteries can be considered

evaluated by UL.

reactive hazardous waste if · Maintenance instructions

there is a significant amount

- For maintenance instructions

of unreacted, or unconsumed

(some steps require access

lithium remaining. For

to the product's webpages),

information about how to

see the User Manual. For

dispose of used lithium

information about how to

batteries, contact your local

configure the Axis product

authority for waste disposal.

using the product's webpages

Specifications

(AXIS Entry Manager), see the

· ·

Operating conditions

- Temperatures

Wire area

0 °C to 50°C (32 °F to 122 °F).

- UL Listed or R/C AWM wires

User Manual. Further information
- Firmware version: Door Controller, Model A1001 1.20.2

that have an conductor gauge

range of AWG 2214 shall be

used.

- The minimum conductor gauge

for connection between the

power sourcing equipment

(PSE) or power injector and

the powered device (PD) is

26 AWG.

· Connectors

- This product is not intended

for outside wiring as covered

by Article 800 in the National

Electrical Code, NFPA 70.

- Power connector For UL

security applications, the

product shall be powered by a

UL 294 Listed or UL 603 Listed

Class 2 low-voltage power

limited power supply that is

capable of 4 hours of standby

power.

- Network connector Power

over Ethernet (PoE) shall be

supplied by a UL 294 Listed

Class 2 power limited injector

that provides 4457 V DC,

15.4 W and 4 hours of

standby power. Compliance

with IEEE 802.3 (at or af)

specifications has not been

verified as part of UL 294/B.

- Tampering alarm pin

header To comply with

UL 294/7.2.1 (Enclosure), the

tampering alarm shall be

connected to a sound alarm.

· System considerations

AXIS A1001 Network Door Controller
7

AXIS A1001 Network Door Controller
8

AXIS A1001 Network Door Controller
9

AXIS A1001 Network Door Controller
10

AXIS A1001 Network Door Controller
11

AXIS A1001 Network Door Controller
12

AXIS A1001 Network Door Controller
13

AXIS A1001 Network Door Controller
14

AXIS A1001 Network Door Controller
15

AXIS A1001 Network Door Controller
1. READER I/O 1 & 2: Reader I/O connector (2x). DC output: 12 V DC, max 300 mA 2. RELAY & PWR*: Power & relay connector. DC output: 12 V DC, max 500 mA. Relay: 30
V DC, max 700 mA 3. LOCK*: Power lock connector. 2x 12 V DC. 0 V DC, floating, or 12 V DC, max total
load: 500 mA 4. DC IN: Power connector. DC input: 1030 V DC, max 26 W. Max load on outputs: 14 W 5. AUX: Auxiliary connector. DC output: 3.3 V DC, max 100 mA. Digital input: 0 to max 40
V DC. Digital output: 0 to max 40 V DC, open drain, 100 mA 6. READER DATA 1 & 2: Reader data connector (2x). RS485 full duplex, RS485 half duplex,
Wiegand 7. DOOR IN 1 & 2: Door connector (2x). Digital input: 0 to max 40 V DC 8. Network connector. RJ45, PoE IEEE 802.3af/802.3at Type 1 Class 3. Max load on outputs:
7.5 W *If the lock is non-polarized, we recommend you to add an external flyback diode.
16

AXIS A1001 Network Door Controller
17

AXIS A1001 Network Door Controller
18

English
Safety information Hazard levels
DANGER
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE Indicates a situation which, if not avoided, could result in damage to property.
Other message levels
Important Indicates significant information which is essential for the product to function correctly.
Note Indicates useful information which helps in getting the most out of the product.
Safety instructions WARNING
The Axis product shall be installed by a trained professional, and in compliance with local laws and regulations.
NOTICE · The Axis product shall be used in compliance with
local laws and regulations. · Axis recommends using a shielded network cable
(STP) CAT5 or higher. · To use the Axis product outdoors, or in similar
environments, it shall be installed in an approved outdoor housing. · Store the Axis product in a dry and ventilated environment. · Avoid exposing the Axis product to shocks or heavy pressure. · Do not install the product on unstable poles, brackets, surfaces or walls. · Use only applicable tools when installing the Axis product. Using excessive force with power tools could cause damage to the product. · Do not use chemicals, caustic agents, or aerosol cleaners. · Use a clean cloth dampened with pure water for cleaning. · Use only accessories that comply with the technical specification of your product. These can be provided by Axis or a third party. Axis recommends using Axis power source equipment compatible with your product. · Use only spare parts provided by or recommended by Axis.

· Do not attempt to repair the product yourself. Contact Axis support or your Axis reseller for service matters.
· The power supply shall be plugged in to a socket outlet installed near the product and shall be easily accessible.
· Use a limited power source (LPS) with either a rated output power limited to 100 W or a rated output current limited to 5 A.
Transportation
NOTICE · When transporting the Axis product, use the
original packaging or equivalent to prevent damage to the product. Battery The Axis product uses a 3.0 V CR2032 lithium battery as the power supply for its internal real-time clock (RTC). Under normal conditions this battery will last for a minimum of five years.
Low battery power affects the operation of the RTC, causing it to reset at every power-up. When the battery needs replacing, a log message will appear in the product's server report. For more information about the server report, see the product´s web page or contact Axis support.
Lithium coin cell 3.0 V batteries contain 1,2-dimethoxyethane; ethylene glycol dimethyl ether (EGDME), CAS no. 110-71-4.
WARNING · Risk of explosion if the battery is incorrectly
replaced. · The battery should be replaced with an identical
battery only. · Used batteries should be disposed of according to
local regulations or the battery manufacturer's instructions.
Français
Informations sur la sécurité Niveaux de risques
DANGER
Indique une situation dangereuse qui, si elle n'est pas évitée, entraînera le décès ou des blessures graves.
AVERTISSEMENT
Indique une situation dangereuse qui, si elle n'est pas évitée, pourrait entraîner le décès ou des blessures graves.
ATTENTION
Indique une situation dangereuse qui, si elle n'est pas évitée, pourrait entraîner des blessures légères ou modérées.
AVIS
Indique une situation qui, si elle n'est pas évitée, pourrait endommager l'appareil.

Autres niveaux de message
Important
Indique les informations importantes, nécessaires pour assurer le bon fonctionnement de l'appareil.
Note
Indique les informations utiles qui permettront d'obtenir le fonctionnement optimal de l'appareil.
Consignes de sécurité
AVERTISSEMENT
Le produit Axis doit être installé par un professionnel qualifié et conformément aux lois et règlementations locales en vigueur.
AVIS
· Le produit Axis doit être utilisé conformément aux lois et règlements locaux.
· Axis recommande d'utiliser un câble réseau blindé (STP) CAT5 ou supérieur.
· Pour pouvoir utiliser le produit Axis à l'extérieur, ou dans des environnements similaires, il doit être installé dans un boîtier d'extérieur homologué.
· Conserver ce produit Axis dans un environnement sec et ventilé.
· Ne pas exposer ce produit Axis aux chocs ou aux fortes pressions.
· Ne pas installer ce produit sur des poteaux, supports, surfaces ou murs instables.
· Utiliser uniquement des outils recommandés pour l'installation de l'appareil Axis. L'application d'une force excessive sur l'appareil avec des outils puissants pourrait l'endommager.
· Ne pas utiliser de produits chimiques, de substances caustiques ou de nettoyants pressurisés.
· Utiliser un chiffon propre imbibé d'eau pure pour le nettoyage.
· Utiliser uniquement des accessoires conformes aux caractéristiques techniques de votre produit. Ils peuvent être fournis par Axis ou un tiers. Axis recommande d'utiliser un équipement d'alimentation Axis compatible avec votre produit.
· Utiliser uniquement les pièces de rechange fournies ou recommandées par Axis.
· Ne pas essayer de réparer vous-même ce produit. Contacter l'assistance technique d'Axis ou votre revendeur Axis pour des problèmes liés à l'entretien.
· L'alimentation électrique doit être branchée à une prise de courant installée près de l'équipement et être facilement accessible.
· Utilisez une source d'alimentation limitée (LPS) dont la puissance de sortie nominale est limitée à 100 W ou dont le courant de sortie nominal est limité à 5 A.
Transport
AVIS
· Lors du transport du produit Axis, utilisez l'emballage d'origine ou un équivalent pour éviter d'endommager le produit.
Batterie Le produit Axis utilise une batterie au lithium CR2032 3,0 V comme alimentation de son horloge en temps réel interne (RTC). Dans des conditions normales, cette batterie a une durée de vie minimale de cinq ans.

Si la batterie est faible, le fonctionnement de l'horloge en temps réel peut être affecté et entraîner sa réinitialisation à chaque mise sous tension. Un message enregistré apparaît dans le rapport de serveur du produit lorsque la batterie doit être remplacée. Pour plus d'informations sur le rapport serveur, consultez la page Web du produit ou contactez l'assistance technique d'Axis.
Les piles boutons 3,0 V au lithium contiennent du 1,2-diméthoxyéthane, éthylène glycol diméthyl éther (EGDME), CAS n° 110-71-4.
AVERTISSEMENT · Risque d'explosion si la batterie est remplacée de
façon incorrecte. · La batterie doit être remplacée par une batterie
identique uniquement. · Les batteries usagées doivent être mises au rebut
conformément aux réglementations locales ou aux instructions du fabricant de la batterie.
Deutsch
Sicherheitsinformationen Gefährdungsstufen
GEFAHR
Weist auf eine gefährliche Situation hin, welche, falls nicht verhindert, zu Tod oder schweren Verletzungen führen kann.
WARNUNG
Weist auf eine gefährliche Situation hin, welche, falls nicht verhindert, zu Tod oder schweren Verletzungen führen kann.
VORSICHT
Weist auf eine gefährliche Situation hin, welche, falls nicht verhindert, zu geringfügiger oder mäßiger Verletzung führen kann.
HINWEIS
Weist auf eine gefährliche Situation hin, welche, falls nicht verhindert, zu Sachschäden führen kann.
Andere Meldeebenen
Wichtig Weist auf wichtige Informationen hin, die den richtigen Betrieb des Produkts gewährleisten.
Beachten Weist auf nützliche Informationen hin, die die optimale Verwendung des Produkts unterstützen.
Sicherheitsanweisungen WARNUNG
Das Axis Produkt muss von fachmännisch geschultem Personal und unter Einhaltung der örtlich geltenden Bestimmungen installiert werden.

HINWEIS
· Das Axis-Produkt muss unter Beachtung der geltenden Gesetze und Bestimmungen betrieben werden.
· Axis empfiehlt die Verwendung eines abgeschirmten Netzwerkkabels (STP) der Kategorie 5 oder höher.
· Für den Einsatz von Axis-Produkten im Außenbereich oder ähnlichen Umgebungen müssen diese in für den Außenbereich zugelassenen Gehäusen installiert werden.
· Lagern Sie das Axis Produkt in einer trockenen und belüfteten Umgebung.
· Das Axis-Produkt weder Stößen noch starkem Druck aussetzen.
· Das Produkt nicht an instabilen Masten, Halterungen, Oberflächen oder Wänden anbringen.
· Verwenden Sie bei der Installation des Axis Produkts ausschließlich passende Werkzeuge. Ein zu großer Kraftaufwand mit elektrischen Werkzeugen kann das Produkt beschädigen.
· Verwenden Sie keine chemischen, ätzenden oder aerosolhaltigen Reinigungsmittel.
· Verwenden Sie zum Reinigen ein sauberes, mit destilliertem Wasser angefeuchtetes Tuch.
· Verwenden Sie nur Zubehör, das den technischen Vorgaben Ihres Produkts entspricht. Dieses ist von Axis oder Drittanbietern erhältlich. Axis empfiehlt die mit Ihrem Produkt kompatible Stromversorgung von Axis.
· Verwenden Sie ausschließlich Ersatzteile die von Axis angeboten oder empfohlen werden.
· Versuchen Sie nicht, dieses Produkt selbsttätig zu reparieren. Wenden Sie sich bezüglich Reparatur und Wartung an den Axis Support oder Ihren Axis Händler.
· Das Netzteil sollte an eine Steckdose in der Nähe des Produkts angeschlossen werden und sollte leicht zugänglich sein.
· Verwenden Sie eine Stromquelle mit begrenzter Leistung (LPS), entweder mit einer Nennausgangsleistung von 100 W oder einem begrenzten Nennausgangsstrom von 5 A.
Transport
HINWEIS
· Bei Bedarf transportieren Sie das Axis Produkt in der Originalverpackung oder einer entsprechenden Verpackung, so dass Schäden vermieden werden.
Batterie Das Axis-Produkt ist mit einer 3,0 V-CR2032-LithiumBatterie ausgestattet, mit der die interne Echtzeituhr (RTC) versorgt wird. Unter normalen Bedingungen hat die Batterie eine Lebensdauer von mindestens fünf Jahren.
Eine nicht ausreichend geladene Batterie beeinträchtigt den Betrieb der Echtzeituhr, die dann bei jedem Systemstart zurückgesetzt wird. Sie erhalten eine Protokollnachricht im Serverbericht des Produkts, wenn ein Batteriewechsel erforderlich ist. Weitere Informationen zum Serverbericht finden Sie auf den Webseiten des Produkts, oder wenden Sie sich an den Axis-Support.
Lithium-Knopfzellen (3,0 V) enthalten 1,2-Dimethoxyethan; Ethylenglycoldimethylether (EGDME), CAS-Nr. 110-71-4.
WARNUNG

· Explosionsgefahr bei fehlerhaftem Batteriewechsel. · Die Batterie darf nur durch eine identische Batterie
ersetzt werden. · Verbrauchte Batterien gemäß den örtlichen
Vorschriften oder den Anweisungen des Herstellers entsorgen.
Italiano
Informazioni di sicurezza Livelli di pericolo
PERICOLO Indica una situazione pericolosa che, se non evitata, provoca morte o lesioni gravi.
AVVERTENZA Indica una situazione pericolosa che, se non evitata, potrebbe provocare la morte o lesioni gravi.
ATTENZIONE Indica una situazione pericolosa che, se non evitata, potrebbe provocare lesioni medie o minori.
AVVISO Indica una situazione che, se non evitata, potrebbe danneggiare la proprietà.
Altri livelli di messaggio
Importante Indica informazioni importanti, essenziali per il corretto funzionamento del dispositivo.
Nota Indica informazioni utili che aiutano a ottenere il massimo dal dispositivo.
Informazioni di sicurezza AVVERTENZA
Il dispositivo Axis deve essere installato da un professionista qualificato, in conformità alle leggi e alle disposizioni locali.
AVVISO · Il dispositivo Axis deve essere utilizzato in
conformità alle leggi e alle normative locali. · Axis consiglia l'uso di un cavo di rete schermato
(STP) CAT5 o superiore. · Per utilizzare il dispositivo Axis in ambienti esterni
o in ambienti simili, deve essere installato in una custodia per esterni approvata. · Conservare il dispositivo Axis in un ambiente asciutto e ventilato. · Evitare di esporre il dispositivo Axis a urti o pressioni eccessive. · Non installare il dispositivo su supporti, superfici, pareti o pali instabili. · Utilizzare solo strumenti applicabili quando si installa il dispositivo Axis. Se si utilizza una forza eccessiva con strumenti non adatti è possibile causare danni al dispositivo. · Non utilizzare sostanze chimiche, agenti caustici o detergenti aerosol.

· Utilizzare un panno pulito inumidito in acqua pura per la pulizia.
· Utilizzare solo accessori compatibili con le specifiche tecniche del dispositivo. Questi possono essere forniti da Axis o da terze parti. Axis consiglia l'uso dell'apparecchiatura di alimentazione Axis compatibile con il dispositivo.
· Utilizzare solo parti di ricambio fornite o consigliate da Axis.
· Non tentare di riparare il dispositivo da soli. Contattare l'assistenza o il rivenditore Axis per questioni relative alla manutenzione.
· Il dispositivo dovrebbe essere collegato ad una presa di corrente vicina e facilmente accessibile.
· Utilizzare una sorgente di alimentazione limitata (LPS) con una potenza di uscita nominale limitata a 100 W o una corrente di output nominale limitata a 5 A.
Trasporto
AVVISO · Durante il trasporto del dispositivo Axis, utilizzare
l'imballaggio originale o equivalente per evitare danni al dispositivo. Batteria Il dispositivo Axis utilizza una batteria al litio da 3,0 V CR2032 come alimentazione per il suo real-time clock (RTC) interno. In condizioni normali questa batteria avrà una durata minima di cinque anni.
Una bassa carica della batteria influisce sul funzionamento del RTC, facendolo resettare a ogni accensione. Quando la batteria deve essere sostituita, un messaggio di registro viene visualizzato nel report server del dispositivo. Per ulteriori informazioni sul report server, vedere la pagina Web del dispositivo o contattare l'assistenza Axis.
Le batterie a bottone al litio da 3 V contengono 1,2-dimetossietano; etere dimetilico di glicole etilenico (EGDME), CAS n. 110-71-4.
AVVERTENZA · Rischio di esplosione se la batteria viene sostituita
in modo errato. · La batteria può essere sostituita solo con una
batteria identica. · Le batterie devono essere smaltite in base alle
normative locali o alle istruzioni del produttore della batteria.
Español
Información de seguridad
Niveles de peligro PELIGRO
Indica una situación peligrosa que, si no se evita, provocará lesiones graves o la muerte.
ADVERTENCIA
Indica una situación peligrosa que, si no se evita, puede provocar lesiones graves o la muerte.
ATENCIÓN

Indica una situación peligrosa que, si no se evita, puede provocar lesiones moderadas o leves.
AVISO
Indica una situación peligrosa que, si no se evita, puede provocar daños materiales.
Otros niveles de mensaje
Importante
Indica información importante que es fundamental para que el producto funcione correctamente.
Nota
Indica información útil que ayuda a aprovechar el producto al máximo.
Instrucciones de seguridad ADVERTENCIA
El producto de Axis debe instalarlo un profesional formado conforme las leyes y normativas locales.
AVISO · Este producto de Axis debe utilizarse de acuerdo
con las leyes y normativas locales. · Axis recomienda utilizar un cable de red blindado
(STP) CAT5 o superior. · Para usar el producto de Axis en exteriores, o en
entornos similares, debe instalarse en una carcasa exterior aprobada. · Almacene el producto de Axis en un entorno seco y ventilado. · Evite la exposición del producto de Axis a choques o a una fuerte presión. · No instale el producto en postes, soportes, superficies o paredes inestables. · Utilice solo las herramientas correspondientes cuando instale el producto de Axis. La aplicación de una fuerza excesiva con herramientas eléctricas puede provocar daños en el producto. · No utilice limpiadores en aerosol, agentes cáusticos ni productos químicos. · Limpie con un paño limpio humedecido con agua pura. · Utilice solo accesorios que cumplan con las especificaciones técnicas de su producto. Estos accesorios los puede proporcionar Axis o un tercero. Axis recomienda utilizar un equipo de suministro de alimentación de Axis compatible con su producto. · Utilice solo piezas de repuesto proporcionadas o recomendadas por Axis. · No intente reparar el producto usted mismo. Póngase en contacto con el servicio de asistencia técnica de Axis o con su distribuidor de Axis para tratar asuntos de reparación. · La fuente de alimentación se enchufará a una toma de conector instalada cerca del producto y a la que se podrá acceder fácilmente. · Use una fuente de alimentación limitada (LPS) con una potencia nominal de salida limitada a 100 W o una corriente nominal de salida limitada a 5 A. Transporte
AVISO · Cuando transporte el producto de Axis, utilice el
embalaje original o un equivalente para evitar daños en el producto.

Batería Este producto de Axis utiliza una batería de litio CR2032 de 3,0 V como fuente de alimentación del reloj interno en tiempo real. En condiciones normales, esta batería durará un mínimo de cinco años.
Un nivel bajo de batería afectará al funcionamiento del reloj en tiempo real, lo que provocará el restablecimiento de este cada vez que se encienda el producto. Cuando sea necesario sustituir la batería, aparecerá un mensaje de registro en el informe del servidor del producto. Para obtener más información sobre el informe del servidor, consulte la página web del producto o póngase en contacto con el soporte técnico de Axis.
Las pilas de botón de litio de 3,0 V contienen 1,2-dimetoxietano; éter dimetílico de etilenglicol (EGDME), n.º CAS 110-71-4.
ADVERTENCIA · La sustitución incorrecta de la batería implica
riesgo de explosión. · La batería solo debe sustituirse por una batería
idéntica. · Las baterías usadas deben desecharse de
conformidad con la normativa local o las instrucciones del fabricante.

·
· Axis
(STP) CAT5 ·
· · · · · · · Axis Axis Axis · Axis · Axis · · 100 W5 A (LPS)
·
(RTC) 3.0 V CR2032 5
RTC RTC Web Axis
3.0 V1,2- ( (EGDME)CAS110-71-4)
·
·

·
Português
Informações sobre segurança Níveis de perigo
PERIGO Indica uma situação perigosa que, se não evitada, irá resultar em morte ou lesões graves.
ATENÇÃO Indica uma situação perigosa que, se não evitada, poderá resultar em morte ou lesões graves.
CUIDADO Indica uma situação perigosa que, se não evitada, poderá resultar em lesões leves ou moderadas.
AVISO Indica uma situação perigosa que, se não evitada, poderá resultar em danos à propriedade.
Outros níveis de mensagens
Importante Indica informações significativas que são essenciais para o produto funcionar corretamente.
Nota Indica informações úteis que ajudam a obter o máximo do produto.
Instruções de segurança ATENÇÃO
O produto Axis deve ser instalado por um profissional treinado e de acordo com as leis e regulamentações locais.
AVISO · O produto Axis deve ser usado em conformidade
com as leis e regulamentações locais. · A Axis recomenda usar um cabo de rede blindado
(STP) CAT5 ou superior. · Para usar o produto Axis em ambientes externos ou
semelhantes, ele deverá ser instalado em uma caixa aprovada para uso externo. · Armazene o produto Axis em um ambiente seco e ventilado. · Evite expor o produto Axis a impactos ou pressão elevada. · Não instale o produto em suportes, mastros, superfícies ou paredes instáveis. · Use apenas as ferramentas recomendadas ao instalar o produto Axis. O uso de força excessiva com ferramentas elétricas poderia danificar o produto. · Não use produtos químicos, agentes cáusticos ou limpadores aerossóis. · Use um pano limpo úmido para limpar o produto. · Utilize apenas acessórios que atendam às especificações técnicas do produto. Esses poderão

ser fornecidos pela Axis ou por terceiros. A Axis recomenda usar equipamento de fonte de alimentação Axis compatível com seu produto. · Utilize apenas peças sobressalentes fornecidas ou recomendadas pela Axis. · Não tente reparar o produto por conta própria. Entre em contato com o suporte ou seu revendedor Axis para quaisquer questões relacionadas a serviços. · A fonte de alimentação deve ser conectada em uma tomada elétrica instalada próxima ao produto e deverá poder ser acessada com facilidade. · Use uma fonte de energia com limitação (LPS) com potência de saída nominal restrita a 100 W ou corrente de saída nominal limitada a 5 A. Transporte
AVISO · Ao transportar o produto Axis, use a embalagem
original ou equivalente para evitar danos ao produto. Bateria Este produto Axis usa uma bateria de lítio CR2032 de 3,0 V como fonte de alimentação para seu relógio interno de tempo real (RTC). Em condições normais, a duração mínima da bateria será de cinco anos.
Se a carga da bateria estiver baixa, a operação do RTC será afetada, fazendo com que ele seja reiniciado toda vez que o sistema for ligado. Quando for necessário substituir a bateria, uma mensagem de log será exibida no relatório do servidor do produto. Para obter mais informações sobre o relatório do servidor, consulte a página da Web do produto ou entre em contato com o suporte da Axis.
As baterias tipo célula de íons de lítio de 3,0 V contêm 1,2-dimetoxietano; etileno glicol éter dimetílico (EGDME), nº CAS 110-71-4.
ATENÇÃO · A troca incorreta da bateria poderá representar
risco de explosão. · A bateria deve ser substituída somente por uma
bateria idêntica. · Baterias usadas devem ser descartadas de acordo
com as regulamentações locais ou as instruções do fabricante da bateria.

OACHO
, , , .

, , , .
BHMAHE

, , , .

, .

Axis .

· Axis .
· Axis (STP) 5 .
· Axis , .
· Axis , .
· Axis.
· , , .
· Axis . .
· , .
· , .
· , . Axis . Axis Axis, .
· , Axis.
· . Axis Axis.
· , .
· (LPS),

100 , 5 A.
· Axis
. Axis CR2032 3 . .
: . , . , . - Axis.
(3 ) 1,2-; (EGDME), CAS 110-71-4.

· . ·
. ·
.

· · (STP) CAT5
·
· · ·
·
· · ·
· · · · 100 W 5 A (LPS) · 3.0 V CR2032 (RTC) 3.0 V 1,2- (EGDME)CAS 110-71-4 · · ·

.
. .
. .
Axis . · Axis
. · Axis (STP) CAT5
. · Axis
. · Axis . · Axis . · , , . · Axis . . · , , . · . · . Axis 3 . Axis Axis . · Axis . · . Axis Axis . · . · 100W 5A (LPS) .

· Axis
. Axis 3.0V CR2032 RTC(real-time clock) . 5 . RTC RTC . . Axis . 3.0V 1,2-, EGDME(ethylene glycol dimethyl ether), CAS no. 110-71-4 .
·
. ·
. ·
.

Ver. M2.2 Date: June 2021 Part No. 2380090

References

Arbortext Publishing Engine PDFlib PDI 9.0.3p4 (Win32)