Manual-Hub.com - Free English product PDF Documents!
User Manual for citronic models including: CDUSB-2 CD USB SD Player 2U, CDUSB-2, CD USB SD Player 2U, USB SD Player 2U, SD Player 2U, Player 2U
CITRONIC CDUSB-2 (01) PDF MANUAL - MANUAL-HUB.COM
File Info : application/pdf, 6 Pages, 1.09MB
DocumentDocumentCDUSB-2 CD/USB/SD PLAYER 2U Item ref: 170.663UK User Manual https://manual-hub.com/ Introduction Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty Thank you for choosing the CDUSB-2 CD/USB/SD player as part of your playback system. This product has been developed to provide a flexible, high quality audio source for PA, background music and DJ applications. Please read and keep this manual to achieve the best results from the unit and avoid damage from misuse. Package Contents CDUSB-2 CD/USB/SD player 2U IR remote control + batteries Mains lead(s) User manual If you find any accessory is missing or the product has arrived with any problems, please contact your retailer at once. This product contains no user-serviceable parts so make no attempt to try to fix or modify this item yourself as this will invalidate the warranty. We recommend you keep the original package and proof of purchase for any possible replacement or returned demand. Warning To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture. If liquids are spilled on the housing or disc drawer, stop using immediately, allow unit to dry out and have checked by qualified personnel before further use. Avoid impact or heavy vibration to any of the components. No user serviceable parts inside - refer servicing to qualified service personnel. Safety Ensure that the correct mains lead is used and that the mains voltage is as stated on the unit Avoid ingress of water or particles into any part of the housing Do not place heavy objects on the disc drawer when ejected Placement Keep the console out of direct sunlight and away from heat sources If rack-mounting, ensure that there is adequate support for the weight of the CDUSB-2 and that items racked above it do not place too much pressure to the top of the housing Allow adequate space for the rear connections and avoid leaving controls exposed to possible damage Allow adequate space for the disc drawer to eject at the front of the unit and USB devices to be inserted Cleaning Use a soft dry or slightly damp cloth top clean surfaces of the control panels A soft brush can be used to clear debris from between controls without damaging them To avoid damage, do not use solvents to clean the components A standard cleaning compact disc may be used if the player begins to have difficulty reading discs https://manual-hub.com/ 170.663UK User Manual Front Panel 1. Power 2. Disc drawer 3. IR receiver 4. Source select 5. Multi-function display 6. Vinyl 7. Single/Continue 8. + pitch bend 9. - pitch bend 10. Pitch 11. USB port 12. SD card slot 13. Open/Close 14. Jog wheel 15. Backward search 16. Cue 17. Folder/Track 18. Play/Pause 19. Forward search 20. In 21. Reverse 22. Out 23. Tap 24. Reloop 25. Time 26. Pitch slider Press in to power the unit up Load a CD here (print side up) using the Open/Close button (13) Infra red detector for the signal from the remote control Press to switch through CD - USB - SD - CD - USB - SD etc. Illuminated display with track, name, time and status info Press to make the jog wheel react like a vinyl disc Press to toggle between single track play and continuous Press & hold to temporarily bend the pitch up to +16% Press & hold to temporarily bend the pitch down to -16% Press to activate the pitch slider (26) Insert USB device here containing compressed audio files Insert SD media here containing compressed audio files Press to eject drawer or load disc into the machine Rotate to find cue points, beat sync or scratch passages Search back through folders/tracks - hold for speed search Press to return to cue point set by the "In" button (20) hold to play Press to toggle between folder search or track search Press to play or pause current track Search forward through folders/tracks - hold for speed search Press to set a cue point, which is also the start when playing a loop Engages reverse playback effect Press to set the end point of a loop, press again to exit the loop Tap this button in time with and the BPM value will be displayed Press to jump to the playback loop if the start and end points are set Select time display - track elapsed / track remaining / total remaining Adjust pitch up to ±16% when pitch is activated (10) https://manual-hub.com/ 170.663UK User Manual Rear Panel 27. Fuse holder 28. Fig.8 mains inlet 29. Audio output Holder for 20mm mains fuse 250mA Connect to 100-240Vac power outlet using supplied mains lead Left + Right RCA line output Remote Control The CDUSB-2 is supplied with a handheld infra red remote control. Before use, insert 2 x AAA batteries into the rear compartment, observing the polarity as indicated. Most of the front panel controls are duplicated on the remote control handset. There are also some additional controls as detailed below. 30. Stop 31. Direct access 32. Next track 33. Next folder 34. Previous track 35. Previous folder Press to stop playback of current track Number keys 0 to 9 for direct track number selection Forwards track search. Hold for speed search Forwards folder search Backwards track search. Hold for speed search Backwards folder search https://manual-hub.com/ 170.663UK User Manual Display 36. CD - USB - SD 37. Track number 38. Play - Pause - Skip 39. Elapsed - Total - Remain 40. Time 41. Progress 42. BPM 43. Folder 44. Cue 45. Single - Continue 46. Loop 47. Pitch 48. ID3 display Current selected audio source Current selected track or total number of tracks when first loaded Current play status (play, pause, forward or reverse symbol) Time display status (elapsed, total elapsed or remaining time) Minutes, seconds and hundredths display Bar graph display showing track progress - flashes 30s before end Beats per minute display Current selected folder or total number of folders when first loaded Indicates when track is at cue point & flashes when cue point is set Single track play or continuous folder play Indicates when loop is active Displays percentage of playback speed when pitch change is active Track name (scrolling) display Operation Connect the fig.8 inlet (28) to a mains supply using the mains lead supplied and connect the audio output (29) to the mixer, recorder or amplifier being used. Press in the power button (1) to power up the unit. To play a CD, press the "Open/Close" button (13) and a drawer will eject from the front panel. Carefully place the CD with print-side-up onto the drawer and press "Open/Close" again to load. When loaded, if CD is not selected, press Source select (4) until "CD" is displayed as the source. Disc information will be displayed. Standard CD audio or compressed digital audio can be played. Press Play/Pause to initiate playback. To play compressed audio files from a USB memory device or SD card, insert the media into the relevant connector on the front panel (11, 12) and press Source select to choose the relevant media. Press Play/Pause to initiate playback and use further controls as detailed in the panel layouts above. The CDUSB-2 can be operated either by front panel controls or the supplied handheld IR remote control. Before use, insert the 2 x AAA batteries into the remote control, observing the correct polarity as indicated inside the rear compartment. When not in use for long periods, disconnect the CDUSB-2 from the mains supply. 170.663UK User Manual https://manual-hub.com/ Specifications Power supply Power consumption Anti-shock Pitch bend USB input SD card slot Output connection Frequency response SNR THD Channel separation Output level Output impedance Remote : Battery Dimensions Weight 100-240Vac, 50/60Hz (fig 8) 20W 20 seconds Up to ±16% v.2.0 320GB max (500GB max self-powered) SD cards up to 8GB L+R RCA 20Hz - 20kHz (±2dB) >90dB <0.1% 81dB 1.1Vrms @10k Ohms 1k Ohms 2 x AAA (supplied) 482 x 260 x 94mm 3.35kg Troubleshooting No power & no indicators lighting Power is on but no playback Playback is indicated but no audio output No pitch control Continuous looping No response from remote control Ensure that mains is connected properly and supply voltage is correct for the unit. Check power switch, switch at mains outlet and mains plug fuse. Check rear panel fuse. If continually blowing, refer to qualified service personnel Check that CD has CD audio or standard compressed digital audio files on it Check that USB or SD media have standard compressed digital audio files on them Check rear panel audio connections and attached equipment Check that CD or USB/SD media have playable audio files stored on them Ensure that the Pitch button is switched on when using the pitch slider Check that Reloop is not active and press Out to exit if necessary Check 2 x AAA batteries in rear of handset and replace if necessary Make sure handset is pointed in line of sight to the IR receiver on the front panel Disposal: The "Crossed Wheelie Bin" symbol on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines. Errors and omissions excepted. Copyright© 2013. AVSL Group Ltd. https://manual-hub.com/ 170.663UK User Manual