Alcatel-Lucent 1665 Data Multiplexer (DMX)

Engineering and Ordering Information

Release 1.0 - 10.0

Issue 44, October 2013

About This Document

The Alcatel-Lucent 1665 Data Multiplexer was formerly known as the Metropolis® DMX Access Multiplexer. A transition period updated the name and company logo on the components of this product.

DMX abbreviates the Alcatel-Lucent 1665 Data Multiplexer system in this document. ED8C871-10 describes DMX orderable items to support the DMX Applications and Planning Guide (APG). The APG describes all DMX architecture, technical specifications and customer service details. See also ED8C871-20 for DMX cable signal and color code connections and the DMX Installation Manual for complete details.

Ordering Documents

Check latest issues and order Alcatel-Lucent documents at Online Customer Support (OLCS): https://support.lucent.com

To comment on this document, see the Online Comment Form at: http://infodoc.alcatel-lucent.com/comments/enus/ or e-mail your comments to the Comments Hotline: comments@alcatel-lucent.com

For assistance, call Customer Support Services at 1-866-582-3688

Issue Notes

  • Issue 44, September 2013: Updated for R10.0. Removed discontinued codes.
  • Issue 43, August 2012: Updated for R9.0. Removed discontinued codes.
  • Issue 42, July 26, 2010: Added R9.0 software, hardware, documentation and kits. Removed discontinued codes.
  • Issue 41, February 26, 2010: Added R8.0.4 software, documentation and kits. Changed 735C back to 735A. Removed discontinued fibers from Table D. Updated - Note 9, cable test pack kits, power cable descriptions, discontinuing codes.
  • Issue 40, September 18, 2009: Added R8.0.2, R8.0.3 software, documentation and kits. Added RJ45/ground note to 10/100 MbE Fast Ethernet cables. Updated Note 9 with resource for optical fibers, attenuators etc. Discontinued various Table C and D fiber codes. Verified latest stocked codes.
  • Issue 39, February, 2009: Added R8.0.1 software, 849107131 LNW2 8.0.1 kit, 109586479 OC192 plugin. Added customer specific 849102371 OC192 kit and 849105671 sync kit. Removed customer specific filtered sync cables and TDI power unit. Updated 408897163 fan CLEI.

Engineering Notes

  1. This document contains DMX orderable item details. The APG contains complete circuit pack specifications and integration information. Use the Installation Manual for complete installation instruction. See “Ordering Documents” for latest issues of documentation.
  2. A System Controller circuit pack is required for software and provisioning.
  3. DMX's circuit packs are grouped into three types in Table A: High Speed (Main) Interfaces which go into Main slots M1/2 Tributary TDM (Function / Growth) Interfaces which go into slots A1/2 - G1/2 Apparatus blanks for all un-populated slots
  4. Blanks must be installed in all empty slots to ensure air flow and cooling through the shelf.
  5. Spare pack recommendation is a minimum of one spare per code. For additional recommendations, see the APG.
  6. The NEBS Level III compliant DMX is designed to mount in a 19" or 23" wide bay or outside plant cabinet. Four DMX can be stacked in a 7 foot bay (1/2" space at the bottom of the bay for airflow). DMX may be stacked due to its baffled fan unit (standard) or integrated top baffle (high capacity). When mounting DMX above non-DMX heat generating equipment, the respective baffle must be installed between DMX and that equipment.
  7. Cables are not supplied with the shelf and must be ordered separately. See the Table of Contents for the different types of cables. See ED8C871-20 for cabling signal, pin, connector, etc. details.
  8. DMX requires the 42-degree angled rotating boot LC. One code provides one fiber. Table D halogen free fibers have a 1.6mm outer diameter. Only the “Angled LC to Straight SC Single Mode Fiber" codes are stocked.
  9. The 30 amp shelf requires a -48VDC Power Feed A and B. It is designed to work from -40.0 to -60.0 VDC, and each feed has a 30 amp circuit breaker. Therefore, worst case List 2 max current drain, when only one -40V feed powers the shelf, is considered 27.5 amps. Therefore, 27.5 amps x 40 volts = 1100 watts maximum power / heat dissipated by the 30 amp shelf List 1 current drains, i.e., similar dissipation but at -48V, yields 1100 watts / 48 volts = 23 amps.
  10. Power Feed A/B Warnings: If a 30 amp shelf with one fan, one LNW2, two LNW59, and ten LNW170 loses one feed, the drain will exceed the 30 amp breaker of the second feed and the shelf will lose all power.
  11. Fiber assemblies, cable assemblies or kits referring to this note are stocked items and are available to ship in 5 working days or less after receipt of order. All others are available to ship in 20 working days or less after receipt of order. See also Note 9.
  12. Each initial / upgrade software kit contains one release specific Software CD, Documentation CD (see Eng Note 16), Customer Release Notes (CRN) CD. Before ordering software, determine software and hardware compatibility. Identify the software in service before ordering a software upgrade.
  13. Twelve individually bagged BNC plugs each with assembly instructions are included in the kit. The kit also includes one spare BNC plug. For example, each DS3#1-12 cable code requires 12 IN and 12 OUT BNCs, so order two kits.
  14. Twenty four individually bagged BNC plugs each with assembly instructions are included in the kit. The kit also includes one spare BNC plug. For example, each DS3#1-24 cable code requires 24 IN and 24 OUT BNCs, so order two kits.
  15. APG 109251496 covers all features earlier than R7.1. The R10.0 APG 365-372-300R10.0 covers all current features minus any discontinued features of earlier releases.
  16. Upgrade kits include all required software and the CRN. For example, an upgrade from R7.1.2 to R10.0.0 requires an upgrade to R8.0.5 as an intermediate step. The R8.0.5 software is included in the upgrade kit.

Features

Table A - "Standard" DMX items vs. “High Capacity Specific” (see also Table B)

Description Initial Release Orderable Code Apparatus Code CLEI Code
Main High Speed Packs for M1, M2 slots, see Figs. 1, 3:
OC12 Intermediate Range (IR) OSP, 12 STS1 (DA 6/30/14) 3.1 109187575 LNW48 SOI7EE0C
OC12 40km Long Range (LR1) OSP, 12 STS1 (DA 6/30/14) 3.1 109319590 LNW50 SOI7EEZC
OC12 Plugin Port 1, 12 STS1 OSP, see Table A - OC12 Plugins 9.0 109702555 LNW203 SOUIBEFF
OC48 2km Short Range (SR1), 48 STS1 (DA 6/30/14) 2.1 109164947 LNW76 SOI5MYOD
OC48 40km Long Range LR1, 48 STS1 (DA 6/30/14) 2.1 108923525 LNW27 SOIFBNZC
OC48 80km LR2 1550 nm, 48 STS1 (DA 6/30/14) 2.1 108923541 LNW29 SOIFBN1C
OC48 Plugin Port 1, 48 STS1 VT fabric, see Table A - Plugins 7.1 109589135 LNW202 SOUIAWNF
OC192 Short Range 2km, 48 STS1 2.1.2 109164939 LNW58 SOI4D0ZA
OC192 Intermediate Range 40km, 48 STS1 (DA 6/30/14) 2.1.2 108848052 LNW56 SOI1HS0A
OC192 Plugin Port 1, STS48 VT fabric, see Table A - Plugins 7.0 109589127 LNW502 SOUIAV5F
Low Speed Packs for Function Slots A1&2, B1&2, C1&2, D1&2 only, i.e, no VLF (see Figs. 1, 3):
One Function slot is active. The other, if used, is protection. Growth slots G1 & G2 have no backplane cable access. See Table B for High Capacity Specific Very Large Fabric (VLF)
DS1 Port 1-28 PM, OSP, not VLF compatible, see VLF in Table B 1.0 108764036 LNW7 SOIFLSOC
DS1 Port 1-56, R4.0 DS1/E1 Ports 1-56, PM, OSP (DA 6/30/14) 3.1.1 109164889 LNW8 SOCMBONJ
DS1/E1 Port 1-56, Performance Monitoring (PM), OSP 8.0 109664490 LNW801 SOOMACRE
DS3 Port 1-12, OSP 1.1 108694845 LNW16 SOIFJMOC
Transmux Port 1-12, use the 12 DS3 cable, OSP (DA 12/31/14) 3.0 109164905 LNW18 SOCMBOPJ
DS3 Port 1-48 with loopback, OSP 5.0 109492470 LNW19B SOI6120C
DS3 / Transmux Port 1-48, OSP 7.0.1 109535070 LNW20 SOOMABDE
for Function / Growth Slots A1&2 - G1&2, i.e, no VLF:
OC3 Plugin Port 1-4, 12 STS1, OSP, see Table A - Plugins 4.0 109068783 LNW37 SOI9L5TC
OC3 Plugin Port 1-8, 48 STS1, OSP, see Table A - Plugins 5.0 109411082 LNW45 SOI9LPUC
OC12 Plugin Port 1-4, 48 STS1 OSP, see Table A - Plugins 4.0 109319582 LNW49 SOI9T4UC
OC48 Port 1, Intermediate Range, 1310nm, 12 STS1 2.0 109008987 LNW31 SOI5KL5D
OC48/ OC48 DWDM Plugin Port 1, 12STS1 OSP see Table A - Plugins, use either OC48 or OC48 DWDM plugins 8.0 109678870 LNW402 SOUIA6KF
OC192 DWDM Port 1-8 Ch52-59 195.2-195.9THz, a Mux/Demux Port and an I/O Port for pass thru add/drop ability, adjacent packs, requires deep front cover 7.1 109616565 LNW785 WMOMA3MJ
OC192 10G Mux/Demux Port with 1GE/FC/2XFC/FICON/OC3-12 Plugin Ports 1-8 or OC48 Plugin Ports 1,3,5,7 with 2,4,6,8 not available, requires deep front cover. See Table A –Plugins for Slots A1-G1 only & a blank required in Slot 2, i.e, no VLF: 7.1.1 109614834 LNW705 SOOMAB3E
Enhanced Private Line VT1.5 Concat., LCAS, OSP 100MbE (100Base-FX) Fiber Plugin Ports 1-8 and 10Base-T/100Base-TX Backplane Electrical Ports 1-16, 100m max (Slot G1 cannot provide these 16 electrical ports) 5.0 109492504 LNW74 SO2ILU0A
2 x 2Gb/s Fiber Channel / FICON / ESCON SAN Private Line over SONET, Fiber Plugin Ports 1-4, see Table A – Plugins (DA 12/31/14) 5.1 109461491 LNW73 SOI9Z9ZC
GbE QOS Fiber Plugin Ports 1-4 Fiber/Electrical) and 100MbE Fiber Plugin Ports 5-8 (Fiber/Electrical) Link Aggregation, see Table A - Plugins 7.1 109642728 LNW170 SOUIAWHF
GbE 1000Base-X Private Line OSP R6.0 Fiber (Fiber/Electrical) Plugin Ports 1-4, see Table A - Plugins 6.0 109535088 LNW63 SOUIAB6A
100MbE/GbE Fiber/Electrical Plugin Port 1-4 Private Line, OSP, see Table A - Plugins 9.0 109709188 LNW87 SOUIBFPF
Plugins, i.e., SFP, XFP, PTM types: for respective pack types / rates unless specifically stated
OC3 2km 1310nm Single Mode (SM) LC industrial for LNW37, LNW45, LNW55, LNW82, LNW705 7.0 109602599 S15512 WOTRAAXC
similar to above except 15km 4.0 109453894 OC3IR111 SOOJBDEC
similar to above except 40km 4.0 109453886 OC3LR111 SOOJBCDC
OC12 15km 1310nm SM LC industrial for LNW49, LNW55, LNW82, LNW705 4.0 109453902 OC12IR111 SOOJCCEC
similar to above except 40km 4.0 109467522 OC12LR111 SOOJCCDC
similar to above except 80km 1550nm 7.0 109604447 OC12LR211 SOOTAFXD
OC3/12 622Mb/s Coarse WDM-LR (CWDM-LR) SM LC for LNW37, LNW45, LNW49, LNW55, LNW82, LNW705
Ch47 1471nm (DA 3/31/14) 109664086 S622C47EL SOUIA3FF
Ch49 1491nm (DA 3/31/14) 109664094 S622C49EL SOUIA3GF
Ch51 1511nm (DA 3/31/14) 8.0 109664102 S622C51EL SOUIA3HF
Ch53 1531nm (DA 6/30/14) 109664110 S622C53EL SOUIA3JF
Ch55 1551nm (DA 3/31/14) 109664128 S622C55EL SOUIA3KF
Ch57 1571nm (DA 6/30/14) 109664136 S622C57EL SOUIA3LF
Ch59 1591nm (DA 6/30/14) 109664144 S622C59EL SOUIA3MF
Ch61 1611nm (DA 3/31/14) 109664151 S622C61EL SOUIA3NF
OC3/12/48 15km 1310nm SM LC for LNW82, LNW55 only 9.0 109708131 OC3X12X48-IR1-11 NGI7ASTA
similar to above except 40km 109708149 OC3X12X48-LR1-11 NGI7ASUA
OC48 2km 1310nm XT (industrial) SM LC for LNW202, LNW55, LNW62, LNW82, LNW402, LNW504, LNW705 7.1 109564518 OC48SR1 SOUIAJZF
similar except 40km 109493528 OC48LR1 SOOTABRD
similar except 80km 1550nm 109504431 OC48LR2 SOOTACED
OC48 CWDM with bail latch SM LC Ch47 1470.0 nm for LNW55, LNW62, LNW82, LNW202, LNW402, LNW504 (DA 6/30/14)
Ch49 490.0 nm (DA 6/30/14) 1AB402160002 S2G7C47LI WOTRBOGT
Ch51 1510.0 nm (DA 6/30/14) 9.0 1AB402160004 S2G7C51LI WOTRBOJT
Ch53 1530.0 nm (DA 6/30/14) 1AB402160005 S2G7C53LI WOTRBOKT
Ch57 1570.0 nm (DA 6/30/14) 1AB402160007 S2G7C57LI WOTRBOMT
OC48/OTU1 DWDM 80km 1550nm SM LC for LNW55, LNW62, LNW82, LNW202, LNW402, LNW504
192.3THz/1558.983nm 109610378 S2D23C6 WOTRAD7C
192.5THz/1557.363nm 109610394 S2D25C6 WOTRAD9C
192.7THz/1555.747nm 109610410 S2D27C6 WOTRAEBC
193.1THz/1552.524nm (DA 12/31/14) 7.1 109610451 S2D31C6 WOTRAEFC
193.3THz/1550.918nm (DA 12/31/14) 109610477 S2D33C6 WOTRAEНС
193.5THz/1549.315nm (DA 12/31/14) 109610493 S2D35C6 WOTRAEKC
193.7THz/1547.715nm (DA 12/31/14) 109610519 S2D37C6 WOTRAEMC
194.5THz/1541.349nm (DA 12/31/14) 109610600 S2D45C6 WOTRAEWC
194.7THz/1539.766nm (DA 12/31/14) 109610626 S2D47C6 WOTRAEYC
194.9THz/1538.186nm (DA 12/31/14) 109610642 S2D49C6 WOTRAEOC
195.3THz/1535.036nm 109610691 S2D53C6 WOTRAE4C
195.5THz/1533.465nm 109610717 S2D55C6 WOTRAE6C
195.9THz/1530.334nm 109610766 S2D59C6 WOTRAFAC
OC192 2km 1310SM LC for LNW59, LNW502, LNW504, LNW603, LNW705
similar except 40km 1550nm 7.0 109537902 OC192SR1-C1 SOUIAB7F
similar except extended temp 40km 1550nm SM LC for LNW59 and LWN705 109537563 OC192IR2-C1 SOUIAB8F
similar except 80km 1550nm SM LC 109586479 OC192IR2-11 SOOTAFKD
OC192/STM64/OTU2 11.1Gb/s DWDM-LR 1550 nm SM LC for LNW59, LNW502, LNW504, LNW603, LNW705 109537555 OC192LR2-C1 SOUIAB9F
192.1 THz, 1560.606 nm Ch21 109615005 X10G21C5 WOTRAFEC
192.2 THz, 1559.794 nm Ch22 109615013 X10G22C5 WOTRAFFC
192.3 THz, 1558.983 nm Ch23 109615021 X10G23C5 WOTRAFGC
192.4 THz, 1558.173 nm Ch24 109615039 X10G24C5 WOTRAFHC
192.5 THz, 1557.363 nm Ch25 109615047 X10G25C5 WOTRAFJC
192.6 THz, 1556.555 nm Ch26 109615054 X10G26C5 WOTRAFKC
192.7 THz, 1555.747 nm Ch27 7.1.1 109615062 X10G27C5 WOTRAFLC
192.8 THz, 1554.940 nm Ch28 109615070 X10G28C5 WOTRAFMC
195.2 THz, 1535.822 nm Ch52 (DA 12/31/14) 109615310 X10G52C5 WOTRAGCC
195.3 THz, 1535.036 nm Ch53 109615328 X10G53C5 WOTRAGDC
195.4 THz, 1534.250 nm Ch54 (DA 12/31/14) 109615336 X10G54C5 WOTRAGEC
195.5 THz, 1533.465 nm Ch55 109615344 X10G55C5 WOTRAGFC
195.6 THz, 1532.681 nm Ch56 (DA 12/31/14) 109615351 X10G56C5 WOTRAGGC
195.7 THz, 1531.898 nm Ch57 (DA 12/31/14) 109615369 X10G57C5 WOTRAGHC
195.8 THz, 1531.116 nm Ch58 (DA 12/31/14) 109615377 X10G58C5 WOTRAGJC
195.9 THz, 1530.334 nm Ch59 109615385 X10G59C5 WOTRAGKC
OC48/OTU1 DWDM 80km 1550nm SM LC for LNW59, LNW502, LNW504, LNW603, LNW705
193.1 THz, 1552.524 nm 109615104 X10G31C5 WOTRAFRC
193.3 THz, 1550.918 nm 109615120 X10G33C5 WOTRAFTC
193.5 THz, 1549.315 nm 109615146 X10G35C5 WOTRAFVC
193.7 THz, 1547.715 nm 9.0 109615161 X10G37C5 WOTRAFXC
194.5 THz, 1541.349 nm 109615245 X10G45C5 WOTRAF5C
194.7 THz, 1539.766 nm 109615260 X10G47C5 WOTRAF7C
194.9 THz, 1538.186 nm 109615286 X10G49C5 WOTRAF9C
100MbE 100BASE-LX-11 1310nm SM for LNW74, LNW87, LNW170, LNW910 5.0 109527812 OMFE SOOTACKD
100MbE SM 100BASE-ZX IT 1550nm for LNW74, LNW87, LNW170 (DA 12/31/14) 9.0 109703157 100BASE-ZX-11 NGI7AR92
100MbE MM 100BASE-FX IT 1310nm for LNW74, LNW87, LNW170 109703140 100BASE-FX-11 NGI7AR82
GbE-1X/2XFC-1000BaseSX(XT)-I1 industrial SR 850nm MM for LNW63, LNW64, LNW73, LNW87, LNW170, LNW705, LNW910 6.0 109570606 OM1G/OMFC SOOTAE8D
GbE-1X/2XFC-1000BaseLX(XT)-11 industrial 1310 SM for LNW63, LNW64, LNW73, LNW87, LNW170, LNW705, LNW910 6.0 109568782 OM1G/OMFC SOOTAETD
GbE 1000Base-ZX-I1 commercial temp ER 1550 SM, for LNW63, LNW64, LNW170, LNW87, LNW910 6.0 109541862 OM1G/SFP SOOTAC2D
GbE/100MbE/10 1000/100/10Base-T-C1 Electrical, for LNW63, LNW64, LNW170, LNW87 6.0 109565549 EM1G/EMFE SOOTAERD
100/1000Base-T(XT) Electrical for LNW910 10.0 109603134 EM1G/EMFE WOTRAC6C
10GBase-LR, 10km, 1310nm SM, XT for LNW910 10.0 109603704 OM10G WOTRAC8C
10GBase-ER, 40km, 1550nm SM, XT for LNW910 10.0 109603712 OM10G WOTRAC9C
10GBase-ZR, 80km, 1550nm SM, XT for LNW910 10.0 109603720 OM10G WOTRADAC
Customer Specific Shelf, Circuit Pack, Hardware Kits:
HC 30A shelf, 10 177D with 24 position fiber bracket 4.0 848953089 - -
Cable Kit = 6Ga 12' Power, 8' CIT, 10' LAN Crossover, and 2 Sync filtered connectors 4.0 848953097 - Eng.Note 13
Cable Kit = 6Ga 12' Power, 8' CIT, 10' LAN Crossover 4.0 848953113 - -
Cable Kit = 6Ga 12' Power and 1 Sync filtered connector 4.0 848953121 - -
Cable Kit, qty=1 6ga 12' power, 150' HC Misc. Discrete, 150' X.25-X.25, 150' Office Alarm, 8' CIT, and 150' Sync w/ filtered connector 4.0 848955282 - Eng.Note 13
Fiber Kit = 1 meter SC to LC Fiber jumper and A1LCS Kit 4.0 848953139 - -
2 DS3 Panel Brackets, 2 Cable Brackets Kit, order 1 kit per DMX 849060165 - -
Below kits etc are as required for the above DS3 Panel Frame Kit:
22" Cool Grey End Guard Kit, one end guard w/ mounting hardware 849056122 - -
Spare Kit of Fasteners for DS3 Cables to Brackets 7.0.1 849056114 - -
DS3 Backplane Test Cable, 62 Pin Plug to 24 coax to 62 Pin Plug 849077821 - -
DS3 Panel Test Cable, 6 Mini-BNC plugs each end 849077847 - -
TK2-20 Trompeter Mini-BNC Jack Repair Kit, 10 jacks included 409064078 - -
kit of ten Mini-BNC Jacks 849077805 - -
one individual Mini-BNC Jack 409064680 - -
Table A - "Standard" DMX items vs. “High Capacity Specific” (see also Table B)
OC48 / 100MbE SES Jump Start Kit: 109655605 R6.0.4 software, 848953097 cable kit, 848953139 fiber kit, 848839577 Misc Discrete cable, 848562286 Office Alarm cable, 848953089 30amp DMX shelf with ten 177D blanks, LNW2 controller, two LNW76 2km OC48 Mains, LNW74 (100MbE Plugin Ports 1-8), 109527812 100MbE-LX-I1 plugin 8.0 849094024 - TDA
OC192/100MbE SES Jump Start Kit: similiar to above except the two LNW76 are replaced with LNW58 2km OC192 Mains 8.0 849094016 - -
DS1 Aggregator Kit: 848793287 30amp DMX shelf, LNW2, two LNW48, eight LNW8, two 177D Blanks 8.0 849101399 - -
OC192 VLF SR Kit: 848793287 30amp DMX shelf, LNW2, two LNW59, two109537902 plugins, two LNW20, eight 177D Blanks 8.0.1 849102371 - -
Filtered Sync Connector Kit: contains one 9 pin filtered connector, plastic cover, standoffs and screws 8.0.1 849105671 - SOM1400H
IR2 Muxponder kit contains 1 LNW705 plus 1 OC-192 IR2 XFP 7.1.1 849157524 - -
LR2 Muxponder kit contains 1 LNW705 plus 1 OC-192 DWDM (109615062) XFP 7.1.1 849157532 - -
High Capacity 30 Amp Shelf, see Figs. 3, 4 includes deep cover, 19/23” mounting brackets, fan, fan cable & filter, and fiber tray 848793287 - SOM1400H
CE 30 Amp Shelf w/ 2 power filters (limited availability) 6.0.1 849016407 - SOM1400H
848793287 shelf w/ deep fiber tray and deep fiber tray retrofit kit 849130158 - -
Deep Fiber Tray Retrofit kit 9.0 849130125 - -
High Capacity Specific Accessories: (see Table A for compatible standard shelf accessories)
Fan Unit FMDMX-HCS-01 6.0.1 408906899 - SOPQAGXD
Fan Filter, UAF-354 2.1 408682615 - -
High Capacity Fan Cable 2.1 848839551 - -
Baffle, 17.5" wide with side brackets which adjust for either 19 or 23" bays, height = 3", 12.5" deep. See Eng. Note 6 2.1 848862181 - -
Vertical fiber duct kit for seismic network bay frame 3.1 848919247 - -
Fiber Spool Kit, Left Side 3.1 848919239 - -
Fiber Spool Kit, Right Side 3.1 848919247 - -
Spare Original Flush Front Cover with Instructions 7.0.2 849070370 - -
Spare Deep Cover and Fiber Tray Retrofit Kit required for LNW55, LNW82, LNW705, LNW785, LNW910 7.0.2 849068358 - -
Table B - High Capacity DMX Shelves and Accessories
High Capacity Shelf Specific VLF Main M1/2 Packs, see Fig. 3: Very Large Fabric (VLF) allows varying packs in Function / Growth Slots 1 vs. 2. LNW82, LNW504, LNW910 require the deep front cover. See the APG for allowed slot / pack combinations.
For DS1 packs, only the LNW8/801 is compatible with VLF Main packs (DS1 LNW6 (discontinued) and LNW7 are not VLF compatible)
VLF OC3/12 Plugin Ports 1-8 or OC48 Port 1 or 5, OSP, see Table A and use OC3/12/48 Plugins, requires deep front cover 7.1 109643932 LNW82 SOUIAW3F
VLF OC192 Plugin Ports 1-2, see Table A and use OC192 Plugins 7.0 109494799 LNW59 SOUIAB4F
VLF OC192 Plugin Port 1-4 or VLF OC192 Plugin Port 1-3 plus OC48 Plugin Port 5-8 VLF see Table A and use OC48/192 Plugins requires the deep front cover 9.0 109709014 LNW504 SOUIBLLF
High Capacity VLF M1/2 Specific Function / Growth Packs: these Function / Growth Slot packs require VLF Main packs above
OC3/12 Plugin Port 1-12 or OC48 Port 1, 4, 7 or 10, OSP, requires deep cover, see Table A and use all OC3/12/48 +C/DWDM Plugins 7.1 109532283 LNW55 SOUIAV1F
OC48 Plugin Ports 1-4, OSP, see Table A and use OC48 Plugins 7.0 109532291 LNW62 SOUIAB5F
OC192 Plugin Port 1, see Table A and use OC192 Plugins 9.0 109680496 LNW603 SOUIA7XF
GbE OSP Fiber Plugin Ports 1-8, see Table A use GbE/Fiber Plugin FE/GE/10GbE requires the deep front cover 7.0 109599696 LNW64 SOOTAFWD
The High Capacity Shelf also uses Table A packs unless stated
Table C - 1665 DMX Cable Assemblies
DS1 Cables backplane 62 pin plug terminated to 28 twisted pairs (24 gauge), far end of cable has no connector. Use on both the standard & high capacity shelf. Each code provides one DS1#1-28 IN cable and one DS1#1-28 OUT cable. 13 10 848954988
13 20 848955001
13 30 848923074
13 50 848548327
13 75 848923082
13 100 848548335
13 125 848923090
For example, if the 28 DS1 LNW7 is in Function Group A, then order one code and connect to J1A OUT and J2A IN 13 150 848548343
For example, if the 56 DS1 LNW8 is in Function Group A, then order two codes, one code connects to J1A OUT and J2A IN for DS1#1-28, the other code connects to J24A OUT and J20A IN for DS1#29-56 13 175 848923108
13 200 848923116
13 250 848548350
13 350 848790762
DS3#1-12 Cables w/ no BNC plugs (e.g., for LNW16, LNW18) Each orderable code provides two cables, i.e, one "DS3#1-12 IN" cable and one “DS3#1-12 OUT" cable. 13 10 849040688
13 20 849040696
The DS3#1-12 IN cable is one 62 pin plug (backplane) connected to 12 735A coaxial cables with no (customer end) connectors. 13 30 849040704
The DS3#1-12 OUT cable is physically the same as the IN cable except for labeling. See below for a choice of (customer end) BNC plugs, order at least 24. If growth to 24 DS3 is possible, use the DS3#1-24 cables below instead. 13 40 849040712
Example: for a 12 DS3 LNW16 in Function Group A, order one 849040688 to receive one 10ft OUT cable to connect to J1A OUT and one 10ft IN cable for J2A IN 13 50 849040720
13 60 849040738
849041710 use ~10ft 735A spliced to 734D cable, 900ft is the max amount of 734D allowed between two DMX. The splice is factory made. Stagger these splices in the cable rack to save space. 13 100 849040746
13 150 849040753
13 250 849040761
13 450 849041710
KINGS 75ohm 735A cable type (12) BNC Plug Kit 13,17 848965778 - -
TROMPETER 75ohm 735A cable type (12) BNC Plug Kit 13,17 848965794 - -
ADC 75ohm 735A cable type (25) BNC Plug Kit 13 849058292 - -
ADC 75ohm 735A cable type (6) BNC Plug Kit 13 849058284 - -
DS3#1-24 Cables w/ no BNC plugs (e.g., for LNW16, LNW18, LNW19, LNW19B) Each orderable code provides two cables, i.e, one "DS3#1-24 IN" cable and one “DS3#1-24 OUT" cable. 13 10 849040886
13 20 849040894
The DS3#1-24 IN cable is one 62 pin plug (backplane) connected to 24 735A coaxial cables with no (customer end) connectors. 13 30 849040902
The DS3#1-24 OUT cable is physically the same as the IN cable except for labeling. See below for a choice of (customer end) BNC plugs, order at least 48. 13 40 849040910
(DS3#1-12 of these 24 can also cable the 12 DS3 LNW16 or 12 Transmux LNW18.) 13 50 849040928
Example: for a 48 DS3 LNW19 in Function Group A, order two 849040886, one code connects to J1A OUT and J2A IN (DS3#1-24) the second code connects to J24A OUT and J20A IN (DS3#25-48) (if required, order at least 96 BNC plugs) 13 60 849040936
13 70 849040944
13 80 849040951
450ft is the maximum amount of 735A cable allowed between two DMX. 13 90 849040969
13 100 849040977
13 110 849040985
13 120 849040993
13 140 849041009
13 150 849041017
13 160 849041025
13 180 849041033
13 200 849041041
13 250 849041066
13 300 849041074
Similar to above except ~10ft of 735A spliced to 734D coaxial cable Required for > 450ft between two DMX. 900ft is the max amount of 734D cable allowed between two DMX. The splice is factory made. Stagger these splices in the cable rack to save space. 13 250 849041785
13 275 849041793
13 300 849041801
13 325 849041819
13 350 849041827
13 450 849041868
KINGS 75ohm 735A cable type (24) BNC Plug Kit 13,18 848963062 - -
KINGS 75ohm 734D cable type (24) BNC Plug Kit 13,18 848963070 - -
TROMPETER 75ohm 735A cable type (24) BNC Plug Kit 13,18 848963088 - -
TROMPETER 75ohm 734D cable type (24) BNC Plug Kit 13,18 848963096 - -
ITT CANON 75ohm 735A cable type (24)BNC Plug Kit this kit includes 24 individually bagged BNCs w/ assembly instructions 13 409013554 - -
ITT CANON 75ohm 734D cable type (24)BNC Plug Kit this kit includes 24 individually bagged BNCs w/ assembly instructions 13 409013588 - -
ITT CANON 75ohm 735A cable type (50)BNC Plug Kit this kit includes 50 individually bagged BNCs w/ assembly instructions 13 409013562 - -
ITT CANON 75ohm 734D cable type (50)BNC Plug Kit this kit includes 50 individually bagged BNCs w/ assembly instructions 13 409013570 - -
ADC 75ohm 735A cable type (50) BNC Plug Kit 13 849058300 - -
Customer Specific Mini-BNC Cable one 735A coaxial cable per code with one Mini-BNC plug to one standard BNC plug for customer specific applications 13 25 109508325 -
13 50 109508333 -
13 100 109508358 -
13 150 109508374 -
Related Kits: 409064078 - TK2-20 Trompeter Mini-BNC Jack Repair Kit 849077805 kit of ten Mini-BNC Jacks 409064680 one individual Mini-BNC Jack 13 200 109508390 -
Miscellaneous Discretes (J11) standard DMX Cables right angle connector, one code required per standard shelf, use on the standard shelf only. 13 15 848979399 -
13 30 848979407 -
13 50 848549598 -
13 100 848549606 -
13 150 848549614 -
Miscellaneous Discretes (J11) high capacity DMX Cables straight connector, one code required per high capacity shelf, use on the high capacity shelf only. 13 15 109321794 -
13 30 109321802 -
13 50 848839569 -
13 100 848839577 -
13 150 848839585 -
13 250 848839593 -
X.25 (J10) to X.25 Cables (Pre-R6.0 only) as required by network design, use on the standard and high capacity shelf. * 350 ft 848549705 DA 01/31/2011 13 100 848549663 -
X.25 (J10) to Switch Cables (Pre-R6.0 only) as required by network design, use on the standard and high capacity shelf. * 350 ft 848570859 DA 01/31/2011 13 150 848549689 -
Office Alarm (J12 Out) Cables, 26 gauge One code is required for the bay's lowest DMX (J12 Out) to the customer patch panel. Then use the Office Alarm Mult cable, below, for additional DMX shelves in that bay. Use on the standard and high capacity shelf. 13 50 848570818 -
13 100 848570826 -
13 150 848558193 -
Office Alarm “Mult” (J12 Out to J13 In) Cables One code is required for each additional DMX in the bay above the lowest DMX. Connect the adjacent, upper DMX J12 Out to the lower DMX J13 In. Use on the standard and high capacity shelf. 13 50 848562286 -
13 100 848562294 -
13 150 848562302 -
PC / CIT (SYSCTL pack) Cable Use on the standard and high capacity shelf 13 3 848589602 -
13 8 848748869 -
Intra-office (IAO) LAN (J16) Crossover Cables (DMX to PC / CIT) as required by network design, 109321810 uses straight RJ45 plugs. The additional codes use one angled RJ45 plug and one straight RJ45 plug. use on the standard and high capacity shelf. 13 10 109321810 -
13 50 848605028 -
13 100 848605036 -
13 200 848605069 -
Intra-office (IAO) LAN (J16) Straight Through Cables (DMX to Ethernet hub / Router) as required by network design, use on the standard and high capacity shelf. 13 8 848748869 -
13 20 109321836 -
13 30 109321844 -
13 40 109321851 -
13 50 848604948 -
13 60 109321869 -
13 70 109321877 -
13 80 109321885 -
13 90 109321893 -
13 100 848604955 -
13 110 109321901 -
13 120 109321919 -
13 130 109321927 -
13 140 109321935 -
13 150 848604963 -
13 160 109321943 -
13 180 109321950 -
13 200 848604971 -
13 220 109321968 -
13 240 109321976 -
Sync1 (J9) and Sync2 (J14) high capacity DMX Cables Straight connector, 2 cables per code, as required by network design, use on the high capacity shelf only. 13 280 109321992 -
13 300 848604997 -
13 50 848839619 -
13 75 848923363 -
13 100 848839627 -
13 125 848923371 -
13 150 848839635 -
13 175 848923389 -
13 200 848923439 -
13 225 848923447 -
13 250 848839643 -
13 300 848923462 -
13 450 848839650 -
Modem (J17) Cables as required by network design, use on the standard and high capacity shelf. 13 50 848756508 -
13 100 848756524 -
13 250 848756532 -
10/100 MbE Fast Ethernet Cables 62 pin plug (DMX) to far end un-terminated. One code provides one cable for Ports 1-12 and one cable for Ports 13-24 for one Fast Ethernet function group, e.g. "J1 A" (Ports 1-12) & "J2 A" (Ports 13-24), use on both the standard & high capacity shelf. 13 8 848819090 -
13 20 848778114 -
13 35 848923280 -
13 50 848778122 -
13 75 848923298 -
13 100 848778106 -
13 125 848923306 -
13 150 848778148 -
At the customer end, these wire to RJ45 Punch Down Blocks, provided by the customer, to convert to RJ45 Receptacles. Connect the cable's shield drain wire to the Block's ground connection if it has one. Otherwise, cut the drain wire at the cable insulation. (DMX cables are grounded at the DMX backplane.) 13 175 848923314 -
13 200 848923322 -
13 225 848923330 -
13 250 848923348 -
13 275 848923355 -
13 300 848778130 -
GbE Ethernet Cables CAT5e Gigabit Ethernet Shielded Connectorized on Both Ends with Straight RJ45 Connector. use on both the standard & high capacity shelf. 13 5 849010483 -
13 10 849010491 -
13 15 849010509 -
13 25 849010525 -
13 50 849010558 -
13 150 849010657 -
Power Cables 2 cables per code, (one for -48V Feed A, one for -48V Feed B) Each cable has DMX straight power connector on one end, the far end is un-terminated. Use on the standard and high capacity shelf. All codes are stocked, see Note 13 10ga 12 848841839 -
12 848635009 - -
50 848635033 - -
6ga 75 848635041 -
100 848635058 - -
35 848935268 - -
4ga 55 848634986 -
100 848635025 - -
55 848935276 - -
2ga 85 848634978 -
100 848635017 - -
Power Connectors Only 2 connectors only per code, no cable, for customers / installers who provide their own cable. 13 2 AWG 848635231 -
13 4 AWG 848635249 -
13 6 AWG 848635934 -
Table D - 1665 DMX Single Mode Fibers, see Note 9
FT Angled LC to Angled LC Angled LC to Straight LC Angled LC to Straight SC
2 109462168 -
4 109462176 109462218 109463026
6 - 109462226
8 - 109462234
10 - -
15 109462184 109463067
25 109462267 109463083
Table D1 - Customer Specific Single Mode Fibers, see Note 9
For OFS Blue Tiger Simplex Mini-Cord Fiber: Order 109602201 LWSMC-001C-SRB fiber and specify the length required, plus, order one of the following to specify the connectors for each end.
Angled LC to Angled LC Angled LC to Angled LC Angled LC to LC (straight) Angled LC to SC Angled LC to LC (straight)
Angled LC to SC Angled LC to SC Angled LC to FC Angled LC to FC
Angled LC to FC Angled LC to FC Angled LC to ST Angled LC to ST
Angled LC to ST Angled LC to ST Angled LC to SCA Angled LC to SCA
Angled LC to SCA Angled LC to SCA
For OFS Blue Tiger Duplex Mini-Cord / Zip cord Fiber: Order 109611814 LWSMC-002C-SRB fiber and specify the length required, plus, order one of the following to specify the connectors for each end.
Angled LC to Angled LC 109637553 LWSMSB2-A40LC-A40LC
Angled LC to LC (straight) 109637561 LWSMSB2-LC-A40LC
Angled LC to FC 109615872 LWSMSB2-FC-A40LC
Angled LC to ST 109615898 LWSMSB2-ST-A40LC
Angled LC to SCA 109659102 LWSMSB2-SCA-A40LC
For OFS Blue Tiger 2 Fiber Round Riser Rated (39 inch breakout each end) Fiber: Order 109615401 LWSMC-002C-BRB fiber and specify the length required, plus, order one of the following to specify the connectors for each end.
Angled LC to Angled LC 109656637 LWSMC2B-A40LC-A40LC
Angled LC to LC (straight) 109656645 LWSMC2B-LC-A40LC
Angled LC to SC 109656652 LWSMC2B-SC-A40LC
Angled LC to FC 109656660 LWSMC2B-FC-A40LC
Angled LC to SCA 109659110 LWSMC2B-SCA-A40LC
For OFS Blue Tiger 4 Fiber Round Riser Rated (39 inch breakout each end) Fiber: Order 109615419 LWSMC-004C-BRB fiber and specify the length required, plus, order one of the following to specify the connectors for each end.
Angled LC to Angled LC 109656728 LWSMC4B-A40LC-A40LC
Angled LC to LC (straight) 109656736 LWSMC4B-LC-A40LC
Angled LC to SC 109656744 LWSMC4B-SC-A40LC
Angled LC to FC 109656751 LWSMC4B-FC-A40LC
Angled LC to ST 109656769 LWSMC4B-ST-A40LC
Angled LC to SCA 109659128 LWSMC4B-SCA-A40LC
Table F - 1665 DMX Software and Documentation
Description Comcode
R5.1.X (see "About This Document" and Notes 14, 17, 18) 109606715
R5.1.3 Initial Application Kit 109684696
R5.1.7 Initial Application Kit 109684712
R5.1.x (x=3,4,5,6) to 5.1.7 Upgrade Kit 109684712
R5.1.3 SRD CD 109606707
R5.1.7 SRD CD 109684688
R5.1.7 SRD (OLCS downloadable) 109684670
Applications and Planning Guide 365-372-300 (OLCS downloadable) 109251496
R5.1 User Operations Guide 365-372-301R5.1 (OLCS downloadable) 109536300
R5.1 Installation Manual 365-372-304R5.1 (OLCS downloadable) 109536326
R5.1 Alarm Messages and Trouble Clearing Guide 365-372-302R5.1 (OLCS downloadable) 109536318
R5.1 TL1 Message Details 365-372-306R5.1 (OLCS downloadable) 109536334
Customer Specific R5.1.3 Initial Application Software 109606830
R5.1.x Documentation CD (DA 6/30/14) 109554287
Engineering and Ordering Information ED8C871-10 (OLCS downloadable) 300520541
Interconnect Information ED8C871-20 (OLCS downloadable) 300596970
R7.1.X (see "About This Document" and Notes 14, 17, 18) 109674739
R7.1.1 Initial Application Kit (DA 12/31/13) 109674739
R3.1 to (5.1.3 to 7.0.2 to) 7.1.1 Upgrade Kit (DA 12/31/13) 109674754
R4.0 to (5.1.3 to 7.0.2 to) 7.1.1 Upgrade Kit (DA 12/31/13) 109674762
R5.0 to (5.1.3 to 7.0.2 to) 7.1.1 Upgrade Kit (DA 12/31/13) 109674770
R5.1.x (x=3, 4, 5, 6) to (7.0.2 to) 7.1.1 Upgrade Kit (DA 12/31/13) 109674804
R6.0.x (x=1, 2, 3, 4) to 7.1.1 Upgrade Kit (DA 12/31/13) 109674812
R7.0.2 to 7.1.1 Upgrade Kit (DA 12/31/13) 109674820
Customer Specific R7.1.1/5.1.1/4.1 CIT Software *** (DA 12/31/13) 109678847
R7.1.1 SRD (OLCS downloadable) (DA 12/31/13) 109674713
R7.1.1 SRD CD (DA 12/31/13) 109674721
R7.1.2 Initial Application Kit 109686311
R3.1 to (5.1.3 to 7.0.2 to) 7.1.2 Upgrade Kit 109686337
R4.0 to (5.1.3 to 7.0.2 to) 7.1.2 Upgrade Kit 109686345
R5.0 to (5.1.3 to 7.0.2 to) 7.1.2 Upgrade Kit 109686352
R5.1.5 to (7.0.2 to) 7.1.2 Upgrade Kit 109686360
R5.1.3, R5.1.4 or 5.1.7 to 7.1.2 Upgrade Kit 109686386
R6.0.x (x=1, 2, 3, 4, 5) to 7.1.2 Upgrade Kit 109686378
R7.0.2 to 7.1.2 Upgrade Kit 109686394
R7.1.1 to 7.1.2 Upgrade Kit 109686402
R7.1.2 SRD (OLCS downloadable) 109686295
R7.1.2 SRD CD 109686303
R7.1.2 CIT Software 109686535
R7.1 Applications and Planning Guide 365-372-300R7.1 (OLCS downloadable) 109666503
R7.1 User Operations Guide 365-372-301R7.1(OLCS downloadable) 109666461
R7.1 Installation Manual 365-372-304R7.1(OLCS downloadable) 109666487
R7.1 Alarm Messages and Trouble Clearing Guide 365-372-302R7.1 (OLCS downloadable) 109666479
R7.1 TL1 Message Details 365-372-306R7.1(OLCS downloadable) 109666495
R8.0 (see "About This Document" and Notes 14, 17, 18) 109680983
R8.0 Applications and Planning Guide 365-372-300 (OLCS downloadable) 109680983
R8.0 User Operations Guide 365-372-301 (OLCS downloadable) 109680942
R8.0 Installation Manual 365-372-304 (OLCS downloadable) 109680967
R8.0 Alarm Messages and Trouble Clearing Guide 365-372-302 (OLCS downloadable) 109680959
R8.0 TL1 Message Details 365-372-306 (OLCS downloadable) 109680975
Engineering and Ordering Information ED8C871-10 (OLCS downloadable) 300520541
Interconnect Information ED8C871-20 (OLCS downloadable) 300596970
CIT Release Compatibility Matrix, 3EM000030550CIZZA (OLCS downloadable)
R8.0.3 (see "About This Document" and Notes 14, 17, 18) 109743336
Customer Specific R8.0.3 Initial Application Kit (DA 6/30/14) 109743336
Customer Specific R3.1 to (5.1.3 to) 8.0.3 Upgrade Kit (DA 6/30/14) 109743351
Customer Specific R4.0 to (5.1.3 to) 8.0.3 Upgrade Kit (DA 6/30/14) 109743369
Customer Specific R5.1.3/5.1.7 to 8.0.3 Upgrade Kit (DA 6/30/14) 109743377
Customer Specific R5.1.6 to (7.1.2 to) 8.0.3 Upgrade Kit (DA 6/30/14) 109743385
Customer Specific R6.0.3 to (7.1.2 to) 8.0.3 Upgrade Kit (DA 6/30/14) 109743393
Customer Specific R7.0.3 to 8.0.3 Upgrade Kit (DA 6/30/14) 109743401
R8.0.3 SRD (OLCS downloadable) 109743310
R8.0.3 SRD CD (DA 6/30/14) 109743328
R8.0.5 (see "About This Document" and Notes 14, 17, 18) 109758979
R8.0.5 Initial Application Kit 109758979
R8.0.5 R3.1 Upgrade Kit 109758995
R8.0.5 R4.0 Upgrade Kit 109759001
R8.0.5 R5.0 Upgrade Kit 109759019
R8.0.5 R5.1.X Upgrade Kit 109759027
R8.0.5 R6.0.1/6.0.4 Upgrade Kit 109759035
R8.0.5 R7.0.2 Upgrade Kit 109759043
R8.0.5 R7.1.1/R7.1.2 Upgrade Kit 109759050
R8.0.5 R8.0.2/R8.0.4 Upgrade Kit 109759068
R8.0.5 Software Release Description (OLCS downloadable) 109758953
R8.0.5 Software Release Description, CD 109758961
R8.0.5 DMX / DMXtend CIT software, including Unite R11.1.1 109759076
R8.0.5 DMX / DMXtend CIT software, including Unite R10.5.4 109759084
CIT SW for 1665 DMX R8.0.5, 1665 DMXTEND R8.0.5 & TSS-5 R7.1.0 with Unite R10.5.4 109760397
CIT SW for 1665 DMX R8.0.5, 1665 DMXTEND R8.0.5 & TSS-5 R7.1.0 with Unite R11.1.1 109760405
R8.0.6 (see "About This Document" and Notes 14, 17, 18) 109770164
R8.0.6 Initial Application Kit 109770164
R8.0.6 R7.1,1 Upgrade Kit 109770180
R8.0.6 R8.0.5 Upgrade Kit 109770198
R8.0.6 Customer Release Notes (OLCS downloadable) 109770149
R8.0.6 Customer Release Notes, CD 109770156
R9.0.1 (see "About This Document" and Notes 14, 17, 18) 109696807
R9.0 Applications and Planning Guide 365-372-300 (OLCS downloadable) 109696807
R9.0 User Provisioning Guide (OLCS downloadable) 109696765
R9.0 Maintenance and Trouble Clearing Guide (OLCS downloadable) 109696773
R9.0 Installation and System Turn up Guide (OLCS downloadable) 109696781
R9.0 TL1 Command Guide (OLCS downloadable) 109696799
R9.0.1 Initial Application Kit 109771394
R9.0.1 R3.1 Upgrade Kit 109771410
R9.0.1 R4.0 Upgrade Kit 109771428
R9.0.1 R5.0 Upgrade Kit 109771436
R9.0.1 R5.1.3/R5.1.7 Upgrade Kit 109771444
R9.0.1 R5.1.4/R5.1.6 Upgrade Kit 109771451
R9.0.1 R6.0.1/R6.0.4 Upgrade Kit 109771485
R9.0.1 R6.0.2 Upgrade Kit 109771469
R9.0.1 R7.0.2 Upgrade Kit 109771477
R9.0.1 R7.1.1 Upgrade Kit 109771493
R9.0.1 R7.1.2 Upgrade Kit 109771501
R9.0.1 R7.1.4 Upgrade Kit 109771519
R9.0.1 R8.0.x Upgrade Kit 109771527
R9.0.1 R9.0 Upgrade Kit 109771535
R9.0.1 Initial Application Software (Customer Specific) 109771576
R9.0.1 R3.1 Upgrade Kit (Customer Specific) 109771592
R9.0.1 R4.0 Upgrade Kit (Customer Specific) 109771600
R9.0.1 R5.1.3/R5.1.7 Upgrade Kit (Customer Specific) 109771618
R9.0.1 R5.1.6 Upgrade Kit (Customer Specific) 109771626
R9.0.1 R6.0.3 Upgrade Kit (Customer Specific) 109771634
R9.0.1 R7.0.3 Upgrade Kit (Customer Specific) 109771642
R9.0.1 R8.0.3 Upgrade Kit (Customer Specific) 109771659
R9.0.1 Customer Release Notes (OLCS downloadable) 109771378
R9.0.1 Customer Release Notes, CD 109771386
CIT SW for 1665 DMX R9.0.1, 1665 DMXTEND R9.0.1 & TSS-5 R7.2.1 with Unite R10.5.52 109773002
CIT SW for 1665 DMX R9.0.1, 1665 DMXTEND R9.0.1 & TSS-5 R7.2.1 with Unite R11.1.2 109771667
R9.0.3 (see "About This Document" and Notes 14, 17, 18) 109802256
R9.0.3 Initial Application Kit 109802256
R9.0.3 Initial Application Kit (Customer Specific) 109798553
R9.0.3 R9.0.1 Upgrade Kit (Customer Specific) 109798579
R9.0.3 Customer Release Notes (OLCS downloadable) 109798538
R9.0.3 Customer Release Notes, CD 109798546
R9.1 (see "About This Document" and Notes 14, 17, 18) 109783415
R9.1 Initial Application Kit (DA 12/31/13) 109783415
R9.1 R5.1.3/R5.1.7 Upgrade Kit (DA 12/31/13) 109783431
R9.1 R5.1.4/R5.1.5 Upgrade Kit (DA 12/31/13) 109783449
R9.1 R6.0.1/R6.0.2/R6.0.4 Upgrade Kit (DA 12/31/13) 109783456
R9.1 R7.0.2 Upgrade Kit (DA 12/31/13) 109783308
R9.1 R7.1.1/R7.1.2/R7.1.4 Upgrade Kit (DA 12/31/13) 109783316
R9.1 R8.0.2/R8.0.4/R8.0.5/R8.0.6 Upgrade Kit (DA 12/31/13) 109783324
R9.1 R9.0.1 Upgrade Kit (DA 12/31/13) 109783332
R9.1 Initial Application Kit (Customer Specific) (DA 12/31/13) 109783365
R9.1 R5.1.3/R5.1.7 Upgrade Kit (Customer Specific) (DA 12/31/13) 109783381
R9.1 R8.0.3 Upgrade Kit (Customer Specific) (DA 12/31/13) 109783399
R9.1 R9.0.1 Upgrade Kit (Customer Specific) (DA 12/31/13) 109783407
R9.1 Customer Release Notes (OLCS downloadable) (DA 12/31/13) 109783647
R9.1 Customer Release Notes, CD (DA 12/31/13) 109783274
CIT SW for 1665 DMX R9.1, 1665 DMXTEND R9.1 & TSS-5 R7.2.3 with Unite R10.5.52 109783357
CIT SW for 1665 DMX R9.1, 1665 DMXTEND R9.1 & TSS-5 R7.2.3 with Unite R11.1.26 10978340
R9.1.1 (see "About This Document" and Notes 14, 17, 18) 109793224
R9.1.1 Initial Application Kit 109793224
R9.1.1 R5.1.3 Upgrade Kit 109793240
R9.1.1 R5.1.4/R5.1.5/R5.1.7Upgrade Kit 109793257
R9.1.1 R6.0.1/R6.0.2/R6.0.4 Upgrade Kit 109793265
R9.1.1 R7.0.2 Upgrade Kit 109793273
R9.1.1 R7.1.1/R7.1.2/R7.1.4 Upgrade Kit 109793281
R9.1.1 R8.0.2/R8.0.4/R8.0.5/R8.0.6 Upgrade Kit 109793299
R9.1.1 R9.0.1 Upgrade Kit 109793307
R9.1.1 R9.1 Upgrade Kit 109793315
R9.1.1 Customer Release Notes (OLCS downloadable) 109793208
R9.1.1 Customer Release Notes, CD 109793216
CIT SW for 1665 DMX R9.1.1, 1665 DMXTEND R9.1.1 & TSS-5 R7.2.4 with Unite R10.5.52 109793455
CIT SW for 1665 DMX R9.1.1, 1665 DMXTEND R9.1.1 & TSS-5 R7.2.4 with Unite R11.1.26 109793448
R10.0 (see "About This Document" and Notes 14, 17, 18) 109788984
R10.0 Initial Application Kit 109788984
R10.0 R5.1.3/R5.1.7 Upgrade Kit 109789008
R10.0 R5.1.4/R5.1.5 Upgrade Kit 109789016
R10.0 R6.0.1/R6.0.2/R6.0.4 Upgrade Kit 109789024
R10.0 R7.0.2 Upgrade Kit 109789032
R10.0 R7.1.1/R7.1.2/R7.1.4 Upgrade Kit 109789040
R10.0 R8.0.2/R8.0.4/R8.0.5/R8.0.6 Upgrade Kit 109789057
R10.0 R9.0.1 Upgrade Kit 109789065
R10.0 R9.1.1 Upgrade Kit 109789073
R10.0 Initial Application Software (Customer Specific) 109789107
R10.0 R5.1.3/R5.1.7 Upgrade Kit (Customer Specific) 109789123
R10.0 R8.0.3 Upgrade Kit (Customer Specific) 109789131
R10.0 R9.0.1 Upgrade Kit (Customer Specific) 109789149
R10.0 R9.1.1 Upgrade Kit (Customer Specific) 109789156
R10.0 Customer Release Notes (OLCS downloadable) 109788950
R10.0 Customer Release Notes, CD 109788968
CIT SW for 1665 DMX R10.0, 1665 DMXTEND R10.0 & TSS-5 R7.2.4 with Unite R10.5.54 109789099
CIT SW for 1665 DMX R10.0, 1665 DMXTEND R10.0 & TSS-5 R7.2.4 with Unite R11.1.28 109789081
R10.0.1 (see "About This Document" and Notes 14, 17, 18) 109802769
R10.0.1 Initial Application Kit 109802769
R10.0.1 R5.1.3/R5.1.7 Upgrade Kit 109802785
R10.0.1 R5.1.4/R5.1.5 Upgrade Kit 109802793
R10.0.1 R6.0.1/R6.0.2/R6.0.4 Upgrade Kit 109802801
R10.0.1 R7.0.2 Upgrade Kit 109802819
R10.0.1 R7.1.1/R7.1.2/R7.1.4 Upgrade Kit 109802827
R10.0.1 R8.0.2/R8.0.4/R8.0.5/R8.0.6 Upgrade Kit 109802835
R10.0.1 R9.0.1/R9.0.3 Upgrade Kit 109802843
R10.0.1 R9.1.1 Upgrade Kit 109802850
R10.0.1 R10.0 Upgrade Kit 109802900
R10.0.1 Customer Release Notes (OLCS downloadable) 109802744
R10.0.1 Customer Release Notes, CD 109802751
CIT SW for 1665 DMX R10.0.1, 1665 DMXTEND R10.0.1 & TSS-5 R7.2.4 with Unite R10.5.54 109802876
CIT SW for 1665 DMX R10.0.1, 1665 DMXTEND R10.0.1 & TSS-5 R7.2.4 with Unite R11.1.28 109802868
CIT SW for 1665 DMX R10.0.1, 1665 DMXTEND R10.0.1 & TSS-5 R7.2.4 with Unite R10.5.54 & R11.1.28 109802884
R10.0.2 (see "About This Document" and Notes 14, 17, 18) 109809426
R10.0.2 Initial Application Kit 109809426
R10.0.2 R5.1.3/R5.1.7 Upgrade Kit 109809442
R10.0.2 R5.1.4/R5.1.5 Upgrade Kit 109809459
R10.0.2 R6.0.1/R6.0.2/R6.0.4 Upgrade Kit 109809467
R10.0.2 R7.0.2 Upgrade Kit 109809475
R10.0.2 R7.1.1/R7.1.2/R7.1.4 Upgrade Kit 109809483
R10.0.2 R8.0.2/R8.0.4/R8.0.5/R8.0.6 Upgrade Kit 109809491
R10.0.2 R9.0.1/R9.0.3 Upgrade Kit 109809509
R10.0.2 R9.1.x Upgrade Kit 109809517
R10.0.2 R10.0.0/R10.0.1 Upgrade Kit 109809525
R10.0.2 Customer Release Notes (OLCS downloadable) 109809400
R10.0.2 Customer Release Notes, CD 109809418
CIT SW for 1665 DMX R10.0.2, 1665 DMXTEND R10.0.2 & TSS-5 R7.2.6 with Unite R10.5.x 109809541
CIT SW for 1665 DMX R10.0.2, 1665 DMXTEND R10.0.2 & TSS-5 R7.2.6 with Unite R11.1.x 109809533
CIT SW for 1665 DMX R10.0.2, 1665 DMXTEND R10.0.2 & TSS-5 R7.2.6 with Unite R10.5.x & R11.1.x 109809558
R10.0.3 (see "About This Document" and Notes 14, 17, 18) 109811463
R10.0.3 Initial Application Kit 109811463
R10.0.3 R5.1.3 Upgrade Kit 109811489
R10.0.3 R5.1.4/R5.1.5/R5.1.7 Upgrade Kit 109811497
R10.0.3 R6.0.1/R6.0.2/R6.0.4 Upgrade Kit 109811505
R10.0.3 R7.0.2 Upgrade Kit 109811513
R10.0.3 R7.1.1/R7.1.2/R7.1.4 Upgrade Kit 109811521
R10.0.3 R8.0.2/R8.0.4/R8.0.5/R8.0.6 Upgrade Kit 109811539
R10.0.3 R9.0.1/R9.0.3 Upgrade Kit 109811547
R10.0.3 R9.1.x Upgrade Kit 109811554
R10.0.3 R10.0.0/R10.0.1/R10.0.2 Upgrade Kit 109811562
R10.0.3 Customer Release Notes (OLCS downloadable) 109811488
R10.0.3 Customer Release Notes, CD 109811455
CIT SW for 1665 DMX R10.0.3, 1665 DMXTEND R10.0.3 & TSS-5 R7.2.6 with Unite R10.5.x 109811588
CIT SW for 1665 DMX R10.0.3, 1665 DMXTEND R10.0.3 & TSS-5 R7.2.6 with Unite R11.1.x 109811570
CIT SW for 1665 DMX R10.0.3, 1665 DMXTEND R10.0.3 & TSS-5 R7.2.6 with Unite R10.5.x & R11.1.x 109811596

Floor Plan Data, Standard Alcatel-Lucent 1665 DMX

Standard 20 Amp DMX Shelf Current Drains

Feed Voltage, Single Feed Only Breaker Max Amps (Current Drain) Max Power, Dissipation
A or B -40VDC List 2X
-48VDC List 1
20 Amp 17.5 Amps
14.6 Amps
700 watts

The "Standard 20 Amp" shelf is designed to work from -40 to -60 DC volts. See Eng. Note 12

Standard 1665 DMX Voltage Drop for List 2X Drain

Looped Voltage Drop 2 AWG 4 AWG 6 AWG
0.25V 43 FT 27 FT 17 FT
0.50V 85 FT 55 FT 35 FT
0.75V 127 FT 82 FT 52 FT
1.00V 170 FT 110 FT 70 FT

These calculations assume the two power feeds share the load. Calculations for one feed only increases the wire gauge.

Standard 1665 DMX Bay Frame Layout

A diagram showing typical bay frame layout for a central office, with dimensions for rear and front aisles (762 MM / 30 IN), and bay frame dimensions (432 MM / 17 IN depth, 9 IN front aisle, 4 IN space, 659 MM / 25.94 IN mount arrangement).

Floor Plan Data, High Capacity Alcatel-Lucent 1665 DMX

High Capacity 20 or 30 Amp DMX Shelf Current Drain

Feed Voltage, Single Feed Only Breaker (Shelf) Max Amps (Current Drain) Max Power, Dissipation
A or B -40VDC List 2X
-48VDC List 1
-40VDC List 2X
-48VDC List 1
20 Amp
30 Amp
17.5 Amps
14.6 Amps
27.5 Amps
23 Amps
700 Watts
1100 Watts

The "High Capacity 20 or 30 Amp" shelf is designed to work from -40 to -60 DC volts. See Eng. Note 12

High Capacity 1665 DMX Voltage Drop for List 2X Drain

Looped Voltage Drop 2 AWG 4 AWG 6 AWG
0.25V 27 FT 17 FT 11 FT
0.50V 55 FT 35 FT 22 FT
0.75V 80 FT 55 FT 33 FT
1.00V 110 FT 70 FT 44 FT

These calculations assume the two power feeds share the load. Calculations for one feed only increases the wire gauge.

High Capacity 1665 DMX Bay Frame Layouts

Diagrams illustrating typical bay frame layouts for a central office, including top views with dimensions for rear and front aisles, and mount arrangements. Dimensions provided include 762 MM [30 IN] for rear aisle, 432 MM [17 IN] for bay depth, 9 IN front aisle, 4 IN space, and 659 MM [25.94 IN] for mount arrangement.

Figure 1 – Standard Shelf Front View, Circuit Pack Locations

Diagram showing the front view of a standard shelf with circuit pack locations labeled A1, A2, B1, B2, C1, C2, D1, D2, M-1 (MAIN), M-2 (MAIN), G-1 (GROWTH), G-2 (GROWTH), and SYSCTL. It also indicates the 19/23" adjustable mount bracket, fan unit, and fan filter.

Figure 2 – Standard Shelf Rear View

Diagram showing the rear view of a standard shelf, illustrating various ports and connectors including J1A IN, J1A OUT, J2A IN, J2A OUT, J1B IN, J1B OUT, J2B IN, J2B OUT, J1C IN, J1C OUT, J2C IN, J2C OUT, J1D IN, J1D OUT, J2D IN, J2D OUT, J1T (MISC), J2T (MISC), J10 (X.25), J11 (IAO LAN), J12 (ALM), J13 (ALM MULT), J14 (SYNC1), J15 (SYNC2), J16 (IAO LAN), J17 (MODEM), J18 (FAN SYNC), J19 (48VA), J20 (48VB), J21 (BIN), J22 (CN), J23 (LYNCE), J24 (AN). It also indicates the fan cable connection.

Figure 3 – High Capacity Shelf Front View

Diagram showing the front view of a high capacity shelf with circuit pack locations labeled A1, A2, B1, B2, C1, C2, D1, D2, M-I (MAIN), M-2 (MAIN), G-1 (GROWTH), G-2 (GROWTH), and SYSCTL. It also indicates the 19/23" adjustable mount bracket, fan unit, and filter. The diagram highlights deep/extended front covers versus original flush front covers, with corresponding depth measurements.

Figure 4 – High Capacity Shelf Rear View

Diagram showing the rear view of a high capacity shelf, illustrating various ports and connectors including J1A IN, J1A OUT, J2A IN, J2A OUT, J1B IN, J1B OUT, J2B IN, J2B OUT, J1C IN, J1C OUT, J2C IN, J2C OUT, J1D IN, J1D OUT, J2D IN, J2D OUT, J1T (MISC), J2T (MISC), J10 (X.25), J11 (IAO LAN), J12 (ALM), J13 (ALM MULT), J14 (SYNC1), J15 (SYNC2), J16 (IAO LAN), J17 (MODEM), J18 (FAN SYNC), J19 (48VA), J20 (48VB), J21 (BIN), J22 (CN), J23 (LYNCE), J24 (AN). It also indicates the fan cable connection.

PDF preview unavailable. Download the PDF instead.

ED8C87110 V1 1665 Data Multiplexer (DMX) Release 1.0-10.0 Engineering and Ordering Information Acrobat Distiller 8.1.0 (Windows) Alcatel-Lucent

Related Documents

Preview Alcatel-Lucent 7705 SAR-8 Chassis Installation Guide
This installation guide provides detailed instructions for installing the Alcatel-Lucent 7705 Service Aggregation Router, SAR-8 Chassis. It covers site preparation, chassis installation, component installation, and initialization and provisioning.
Preview Alcatel-Lucent 5620 Service Aware Manager User Guide Release 11.0 R8
Comprehensive user guide for the Alcatel-Lucent 5620 Service Aware Manager (SAM) Release 11.0 R8, detailing its features, operations, and management capabilities for network infrastructure.
Preview Alcatel-Lucent 7705 SAR OS OAM and Diagnostics Guide Release 3.0
Comprehensive guide to Operations, Administration, and Maintenance (OAM) and diagnostics for the Alcatel-Lucent 7705 Service Aggregation Router OS, Release 3.0. Covers configuration, troubleshooting, and command references for network management.
Preview Alcatel-Lucent 7210 SAS D, E, K OS Basic System Configuration Guide
This guide provides network administrators with essential information and procedures for configuring Alcatel-Lucent 7210 SAS-Series routers, covering system concepts, boot options, file system management, and command-line interface (CLI) usage.
Preview Alcatel-Lucent 7705 SAR OS Release 2.1 Basic System Configuration Guide
This guide provides essential information for configuring the Alcatel-Lucent 7705 Service Aggregation Router Operating System (OS) Release 2.1. It covers system initialization, CLI usage, file system management, boot options, and system management.
Preview Alcatel Lucent ALE-30h IP Phone Specifications
Technical specifications and product overview for the Alcatel Lucent ALE-30h IP phone, including brand and part number 3ML37030AA.
Preview Alcatel-Lucent 8168s/8158s WLAN Handset 用户手册
了解 Alcatel-Lucent 8168s 和 8158s WLAN Handset 的功能、设置和操作指南,支持 OmniPCX Enterprise、OXO Connect 和 SIP 系统。
Preview Alcatel-Lucent OmniPCX Enterprise Communication Server Datasheet
Explore the Alcatel-Lucent OmniPCX Enterprise Communication Server, a robust phone system designed for medium, large, and very large enterprises. Discover its features for enhanced business responsiveness, employee mobility, and seamless collaboration with Alcatel-Lucent Rainbow.