Installation Guide for RailTrax models including: VersaTrax Bed Anchor For 3rd Gen Tundra, VersaTrax, Bed Anchor For 3rd Gen Tundra, Anchor For 3rd Gen Tundra, 3rd Gen Tundra, Gen Tundra

VersaTrax – OneTrax QuickConnect Bed Anchor

Nicholas Chase

RailTrax - Install Instructions

Install Instructions – VersaTrax

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 523.99KB

Document Document

VersaTrax ­ RailTrax Install Instructions
Parts Included: (2) RailTrax Rails (4) RailTrax Bolts (1) TP50 (Torx Plus 50) 3/8" Drive (4) Single Stud L-Series Fittings
Step 1: Remove the (4) OEM bed bolts utilizing a T55 (Torx 55) drive (see photo 1).
Step 2: Position each RailTrax Rail between the bed bolt holes. Ensure the lettering is facing outwards to allow the paracord anchor point to be properly utilized (see photo 2).
Step 3: Install the (4) RailTrax Bolts through each slot on the RailTrax Rails and secure directly to the frame of the vehicle utilizing the TP50 (Torx Plus 50) drive included.
Step 4: Torque each bolt to 50 ft/lb.
Step 5: Connect/disconnect any L-series tie down fittings as required to secure your cargo.
Note: Parts/positions being referenced are highlighted in blue in the photos.

Photo 1 Photo 2