Neuhaus Lighting Group E0040027 Remote Control Operation Manual

Remote Control Operation

The remote control allows for various lighting adjustments:

• 1. ON: Turns the light on.
• 2. OFF: Turns the light off.
• 3. Brightness Up (Hold): Continuously increases brightness up to 100%.
• 3. Brightness Up (Short Press): Increases brightness stepwise.
• 4. Nightlight: Activates a low brightness mode (approx. 10% of total brightness).
• 5. Warm to Cold White (Hold): Slowly transitions the light color from warm to cool white.
• 5. Warm to Cold White (Short Press): Stepwise transitions the light color from warm to cool white.
• 6. Cold to Warm White (Hold): Slowly transitions the light color from cool to warm white.
• 6. Cold to Warm White (Short Press): Stepwise transitions the light color from cool to warm white.
• 7. Brightness Down (Hold): Slowly decreases brightness down to 10%.
• 7. Brightness Down (Short Press): Decreases brightness stepwise.
• 8. Synchronization: All lights within the remote's infrared range will synchronize to the last selected color temperature.
• 9. Color Temperature Adjustment: Offers 3-step color temperature settings (3000K / 4000K / 5000K).
• 10. Timer Function: The light will automatically turn off after 30 seconds.

Wall Switch Operation

The lighting fixture can also be controlled via a standard wall switch:

• Memory Function: If the light is turned off via the wall switch and turned back on after more than 3 seconds, it will resume its last set mode (color temperature and brightness).
• CCT (Correlated Color Temperature): By quickly switching the light on and off multiple times, the color temperature can be adjusted through 3 levels: 3000K / 5000K / 6400K.

Technical Data

• Operating Voltage: 3V
• Battery: 2x 1.5V AAA batteries
• Remote Control Range: Approximately 6 meters

Manufacturer Information

Neuhaus Lighting Group

Olakenweg 36, D-59457 Werl